adoption of Patching EBS R12.2 error

Similar Questions

• How do I check the applied patches - EBS R12.2.4

  Hi all

  EBS R12.2.4

  OEL 6

  We have layers applications (appluat) and db (orauat) on different servers, or nodes.

  We applied a lot of tasks on the layer of apps. But I don't know if it has updates on the database tables.

  Then, the application server crashed and restore the backup that is older than a month.

  How do I know what patches have been applied in the original level of apps? Can we check the ad_bugs or the ad_applied_patches for re-mapping audit?

  Thank you very much

  JC

  Hello

  See the table in the ad_applied_patches and re-apply all patches since the accident.

  Kind regards

  Bashar

• How do I abort or kill or cancel suspended adoption patch run? (EBS R12.2.4)

  Hi all

  EBS R12.2.4

  OEL 6.5

  Check patches (adoption-status) without previous state, I applied a fix to help:

  phase of adoption $ = patch = 20059164 patchtop = / home/applcrp2/patch_for_application

  But I got the following error:

  Successful validation. All are called nodes are listed in the table ADOP_VALID_NODES.

  [EVENT]     [EARLY 2015/05/25 15:28:41] Mental health of high-performance database controls

  [EVENT]     [END 2015/05/25 15:28:41] Completed the database sanity checks

  [UNEXPECTED] Apply the phase cannot be performed in a fixed cycle, i.e. after prepare phase.

  Log file: /home/applcrp2/CRP2/fs_ne/EBSapps/log/adop/adop_20150525_152806.log

  [STATEMENT] Run adopscanlog utility, by using the command

  "adopscanlog-latest = yes".

  for a list of the log files as well as the snippet corresponding to each log file error message.

  adopted out with status = 2 (failure)

  
  

  I tried to run adoption-status and I discovered that there was previous patch hanging series

  How do I kill/clear/demolition and clean up the patch suspended?

  $ adop-status

  Enter the password for APPS:

  Current patch ID of Session: 7

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  Master CRP2 PREPARE NOT APPLICABLE

  APPLY ASSETS 23 MARCH 15 13:15:35 + 08:00

  FINALIZE NOT APPLICABLE

  COMMISSIONING DON'T IS NOT APPLICABLE

  CLEANING NOT STARTED

  Folder synchronization system used in this Patching Cycle: None

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /home/applcrp2/CRP2/fs_ne/EBSapps/log/status_20150525_153549/adzdshowstatus.out

  Please wait...

  Done...!

  Help, please...

  Thank you very much

  MK

  Lol demolition Phase is not necessary.

  Don't run cleaning or if you want to apply another /hotpatch so you can continue with the current adoption session.

• Correct way to run adoption patch cycle - EBS R12.2

  Hi all

  What is the right way to run the patch adoption cycle?

  $ . EBSapps.env < EBS_ROOT > run

  phase of adoption $ = prepare

  $ . patch EBSapps.env < EBS_ROOT >

  phase of adoption $ = apply patches = 123456

  phase of adoption $ = complete

  $ . EBSapps.env < EBS_ROOT > run

  $ Shutdown if apps run?
  

  phase of adoption $ = failover

  phase of adoption $ = cleaning

  Thank you all,

  JC

  I think these are the right steps for each phase.

  The last of them is not necessary that the synchronization will be performed the next time you run the preparation phase.

  Kind regards

  Bashar

• Error in pre-reqs EBS R12

  Hi all

  EBS R12.1

  RHEL6

  I was born notes Doc-ID 761566.1 or 1330701.1

  to install fees or charges clone on a new server.

  The two notes are similar to pre-reqs

  The E-Business Suite pre-installation RPM includes all required above RPM and dependencies for running the application and database levels.

  see the "E-Business Suite RPM pre-installation" section below for more details.

  
  

  I ran the ff to install any pre-reqs:

  # cd /etc/yum.repos.d

  # wget http://public-yum.Oracle.com/public-yum-OL6.repo

  # yum install oracle-ebs-Server-R12-preinstall

  But in the end yum install, I get the following error:

  (76/81): unixODBC - 2.2.14 - 14.el6.x86_64.rpm | 377 Ko 00:00

  (77/81): unixODBC-devel - 2.2.14 - 14.el6.i686.rpm |  53KO 00:00

  (78/81): util-linux-ng - 2.17.2 - 12.18.0.1.el6.x86_64.rpm | 1.6 MB 00:00

  (79/81): xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.0.2.i386.rpm | 270KO 00:00

  (80/81): xorg - x 11-utils-7, 5 - 6.el6.x86_64.rpm |  94 Ko 00:00

  (81/81): xorg - x 11-xauth - 1.0.2 - 7.1.el6.x86_64.rpm |  34KO 00:00

  ----------------------------------------------------------------------------------------------

  Total                                                         3.8 MB/s |  MB 91 00:23

  WARNING: rpmts_HdrFromFdno: header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY

  Get the key to file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  GPG key retrieval failed: [Errno 14] could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  
  

  
  

  
  

  
  

  Also for yum install > oracle-RDBMS-server-11 GR 2 - preinstall.x86_64
  

  Summary of the operation

  =======================================================================================================================

  Install the package of 20 (s)

  6 upgrade package

  Total size: 56 M

  Download size: 18 k

  Is this ok [y/N]: y

  Download packages:

  Oracle-RDBMS-Server-11gR2-preinstall-1.0-12.EL6.x86_64.rpm |  18KO 00:00

  WARNING: rpmts_HdrFromFdno: header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY

  Get the key to file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  GPG key retrieval failed: [Errno 14] could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  Help, please...

  Thank you very much

  JC

  Please see (Oracle Linux 6 "yum" command fails with "GPG key recovery has failed" (Doc ID 1604867.1)).

  Thank you

  Hussein

• Browser error - EBS R12.2.4

  Hi all

  EBS R12.2.4

  RHEL6.6

  I have created/cloned two instances CRP (8010) and UAT (8020) on the same server.

  The CRP is accessible by (firefox 41 or ie11) & java 8.60 and the form of java open correctly.

  Before opening the forms, he first asks the following prompts warning:

  

  Run with the latest version allows the browser to open the forms.

  But the UAT instance is accessible, but it cannot open the forms of java. Because it has not displayed the warning above.

  He lifts just below the error:

  

  How can I activate the browser to request that caveat above?

  Whenever this warning box appears, I don't know java forms can open successfully.

  Please help how to solve this problem

  Thank you, jc

  On laptop when there is error, uninstall all versions of java/jre and try UAT first instance and then another instance and verify

  concerning

  Pravin

• Cloning EBS R12.2 run and patch editions

  Hi all

  I noticed that when I do cloning EBS R12.2, I cloned two race and records editions patch (fs1 and fs2) with identical content but different port pool game.

  My question is, because they have different ports, I can start editions both the two? Start or any of them and use alternately?

  Thank you

  MK

  Yes you can start the services of two file systems (use "forcepatchfs" for the patch file system), but users should be accessing the file system to run only. Start services on the patch file system is required for certain tasks that are usually documented (examples, (1375769.1), (1590356.1) and (1530033.1)).

  More details on the RUN/PATCH file systems found in:

  Concepts of Oracle E-Business Suite

  Oracle E-Business Suite Guide interview

  Thank you

  Hussein

• Clone error ebs r12

  Hi all
  
  I use ebs r12 12.1.3 and unique db 11.2.0.3 on OUL5x64
  database using OMF file system
  cloning of database level using quick clone and still get this error.
  
  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 14/12/2012 11:26:10
  ORA-01276: cannot add files u01/clone/DB/data/stage/o1_mf_system_8cldc5bg_.dbf. File has a file name of Oracle managed files.
  
  Can you please help?
  Thanks in advance.
  Kind regards

  user3715462 wrote:
  Thank you, Hussein.

  the database is a single database in log mode archive.
  Here's the script for the clone
  and it is a clone of hot
  Know # Cloning Oracle E - Business Suite Release 12 RAC - Enabled systems with rapid Clone [559518.1 ID]
  4.2 Create Image of database
  This note is for CARS
  but can I use it for the unique database to create a database in step 4.2 image

  Kind regards

  Perl /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/bin/adclone.pl.
  Java=/U01/app/Oracle/product/11.2.0/dbhome_1/appsutil/JRE/.------
  mode = stage.
  stage = / clone/DB.
  component of database = \
  method = RMAN.
  dbctx=/U01/app/Oracle/product/11.2.0/dbhome_1/appsutil/TEST_db1.Xml.------
  showProgress

  If there is a single instance then please follow the steps (cloning Oracle Applications V12 with rapid Clone [406982.1 ID]) and please, do not use the CAR doc.

  Thank you
  Hussein

• Packages, patches, required RPM in Oracle Linux 6 for the installation of the EBS R12.

  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.
  
  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.
  
  Please guide.
  
  Thank you
  Patricia

  swapnil_yeole wrote:
  Hello
  I am not a beginner and I'm doing a vision of Oracle EBS R12 installation on my laptop.

  I downloaded the pack of 3 journalists Oracle Enterprise Linux version 6 update of edelivery.com and installed Oracle Linux on Vmware preinstalled.
  Now, I want to know what all the patches, the packaging and the RPM is necessary as a prerequisite before proceeding with the installation of R12.
  How to check if they are already present and how to install them.
  I have referred to the oracle notes but tangled in what points to be followed and that jump.

  Please guide.

  Thank you
  Patricia

  All BONES and RPM packages can be found in these docs.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]
  Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]

  "Rpm - qa" command to check if the package is installed or not.

  To install the packages, please use "yum install" or 'rpm - Uvh' command.

  Thank you
  Hussein

• EBS R12 - Win 2003 Server R2 Standard Setup error

  Hi Experts,
  
  It's my 8th attempt to install EBS R12 and got the same error.
  OS - Win 2003 Server R2 Standard.
  used CYGWIN, MS Visual C++ 2010 and Strawberry Perl.
  Used Oracle E-Business Suite R12 installation Windows XP steps followed all the steps... Finally even error...
  
  http://www.mediafire.com/?najx7zk8zl780x8
  
  in the link above, I've added all the screenshots of th and the log files.
  1. can I use MS Visual C++ 2010?
  2. can I use strawberries Perl?
  
  Can someone help me please... Please let me know if you need any additional info or any other file of log...
  
  Thank you
  DK

  I tried again, installation with perl 5.x and Visual c ++ 2008. And got the same error... think you can change the operating system from Win 2003 to Win 2008?

  It may be useful, but I can't confirm that, until you try the operating system.

  For the moment, I see two options-
  try to use oracle enterprise linux,
  Deployment Oracle VM model...

  I would recommend OEL.

  Thank you
  Hussein

• Error ORA-600 starting EBS R12.1

  Hello
  
  I'm starting my EBS R12.1 (RHEL 4.6) but I got this error
  

  SQL> startup
  ORACLE instance started.
  
  Total System Global Area 1071333376 bytes
  Fixed Size                  1318172 bytes
  Variable Size             427819748 bytes
  Database Buffers          629145600 bytes
  Redo Buffers               13049856 bytes
  Database mounted.
  ORA-00600: internal error code, arguments: [2252], [2359], [307031790], [], [],
  [], [], [], [], [], [], []

  My alert and trace logs shows:
  

  Errors in file /u01/orar1211/VIS/db/tech_st/11.1.0/admin/VIS_server01/diag/rdbms/vis/VIS/trace/VIS_ora_20256.trc  (incident=32132):
  ORA-00600: internal error code, arguments: [2252], [2359], [307031790], [], [], [], [], [], [], [], [], []
  Incident details in: /u01/orar1211/VIS/db/tech_st/11.1.0/admin/VIS_server01/diag/rdbms/vis/VIS/incident/incdir_32132/VIS_ora_20256_i32132.trc
  ORA-600 signalled during: alter database open...
  Thu Mar 30 10:02:05 2006
  Trace dumping is performing id=[cdmp_20060330100205]
  Thu Mar 30 10:02:06 2006
  Sweep Incident[32132]: completed

  Incident 33732 created, dump file: /u01/orar1211/VIS/db/tech_st/11.1.0/admin/VIS_server01/diag/rdbms/vis/VIS/incident/incdir_33732/VIS_ora_20517_i33732.trc
  ORA-00600: internal error code, arguments: [2252], [2359], [307031790], [], [], [], [], [], [], [], [], []

  Dump file /u01/orar1211/VIS/db/tech_st/11.1.0/admin/VIS_server01/diag/rdbms/vis/VIS/incident/incdir_33732/VIS_ora_20517_i33732.trc
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  ORACLE_HOME = /u01/orar1211/VIS/db/tech_st/11.1.0
  System name:    Linux
  Node name:      server01.abc.biz
  Release:        2.6.9-67.EL
  Version:        #1 Wed Nov 7 13:41:13 EST 2007
  Machine:        i686
  Instance name: VIS
  Redo thread mounted by this instance: 1
  Oracle process number: 16
  Unix process pid: 20517, image: [email protected] (TNS V1-V3)
  
  
  *** 2006-03-30 10:05:11.248
  *** SESSION ID:(400.5) 2006-03-30 10:05:11.248
  *** CLIENT ID:() 2006-03-30 10:05:11.248
  *** SERVICE NAME:() 2006-03-30 10:05:11.248
  *** MODULE NAME:([email protected] (TNS V1-V3)) 2006-03-30 10:05:11.248
  *** ACTION NAME:() 2006-03-30 10:05:11.248
  
  Dump continued from file: /u01/orar1211/VIS/db/tech_st/11.1.0/admin/VIS_server01/diag/rdbms/vis/VIS/trace/VIS_ora_20517.trc
  ORA-00600: internal error code, arguments: [2252], [2359], [307031790], [], [], [], [], [], [], [], [], []

  How I solve this problem please :(
  
  
  Thank you very much
  
  
  Ms. K

  Hi MSK;

  For your error message, it seems that there is no published doc, who is not related to your question. As you follow doc ID of the largest post Hussein snoussi, you will see that there are no published notes again.

  ORA 600 is an internal error which means you need to take support from oracle for can solve the problem. If the problem remains constant and if you still can't open database, as Hussein snoussi suggests connect you as soon as possible a Sr.

  Respect of
  HELIOS

• Cloning of error EBS R12.1

  Hello
  
  EBS R12.1 on OEL 5.4
  
  I am cloning our EBS R12.1, but I got this error:

  Executing service control script:
  /u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adoacorectl.sh start
  script returned:
  ****************************************************
  
  You are running adoacorectl.sh version 120.13
  
  Starting OPMN managed OACORE OC4J instance  ...
  
  adoacorectl.sh: exiting with status 204
  
  adoacorectl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adoacorectl.txt for more information ...
  
  
  .end std out.
  
  .end err out.
  
  ****************************************************
  
  
  Executing service control script:
  /u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adformsctl.sh start
  script returned:
  ****************************************************
  
  You are running adformsctl.sh  version 120.16
  
  Starting OPMN managed FORMS OC4J instance  ...
  
  adformsctl.sh: exiting with status 204
  
  adformsctl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adformsctl.txt for more information ...
  
  
  .end std out.
  
  .end err out.
  
  ****************************************************
  
  
  Executing service control script:
  /u01/applr1211/VIS/inst/apps/VIS_server01/admin/scripts/adoafmctl.sh start
  script returned:
  ****************************************************
  
  You are running adoafmctl.sh version 120.8
  
  Starting OPMN managed OAFM OC4J instance  ...
  
  adoafmctl.sh: exiting with status 204
  
  adoafmctl.sh: check the logfile /u01/applr1211/VIS/inst/apps/VIS_server01/logs/appl/admin/log/adoafmctl.txt for more information ...
  
  
  .end std out.
  
  .end err out.
  
  ****************************************************

  04/22/10-20:21:10 :: adoacorectl.sh version 120.13
  
  
  04/22/10-20:21:10 :: adoacorectl.sh: Stopping OPMN managed OACORE OC4J instance
  
  opmnctl: stopping opmn managed processes...
  ================================================================================
  opmn id=server01.centralbiz.biz:6200
      no processes or applications matched this request
  
  04/22/10-20:21:10 :: adoacorectl.sh: exiting with status 150
  
  
  ================================================================================
  
  
  04/22/10-20:21:29 :: adoacorectl.sh version 120.13
  
  
  04/22/10-20:21:29 :: adoacorectl.sh: starting OPMN if it is not running
  
  opmnctl: opmn is already running.
  
  04/22/10-20:21:29 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance
  
  opmnctl: starting opmn managed processes...
  ================================================================================
  opmn id=server01.centralbiz.biz:6200
      0 of 1 processes started.
  
  ias-instance id=VIS_server01.server01.centralbiz.biz
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  --------------------------------------------------------------------------------
  ias-component/process-type/process-set:
      default_group/oacore/default_group/
  
  Error
  --> Process (index=1,uid=142035787,pid=17959)
      failed to start a managed process after the maximum retry limit
      Log:
      /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~oacore~default_group~1.log
  
  
  04/22/10-20:22:47 :: adoacorectl.sh: exiting with status 204
  
  ==================
  
  
  04/22/10-20:22:47 :: adformsctl.sh version 120.16
  04/22/10-20:22:47 :: adformsctl.sh: starting OPMN if it is not running
  
  opmnctl: opmn is already running.
  
  04/22/10-20:22:47 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance
  
  opmnctl: starting opmn managed processes...
  ================================================================================
  opmn id=server01.centralbiz.biz:6200
      0 of 1 processes started.
  
  ias-instance id=VIS_server01.server01.centralbiz.biz
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  --------------------------------------------------------------------------------
  ias-component/process-type/process-set:
      default_group/forms/default_group/
  
  Error
  --> Process (index=1,uid=142035788,pid=18107)
      failed to start a managed process after the maximum retry limit
      Log:
      /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~forms~default_group~1.log
  
  
  04/22/10-20:23:23 :: adformsctl.sh: exiting with status 204
  
  ==============================
  
  
  04/22/10-20:23:23 :: adoafmctl.sh version 120.8
  
  
  04/22/10-20:23:23 :: adoafmctl.sh: starting OPMN if it is not running
  
  opmnctl: opmn is already running.
  
  04/22/10-20:23:23 :: adoafmctl.sh: Starting OPMN managed OAFM OC4J instance
  
  opmnctl: starting opmn managed processes...
  ================================================================================
  opmn id=server01.centralbiz.biz:6200
      0 of 1 processes started.
  
  ias-instance id=VIS_server01.server01.centralbiz.biz
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  --------------------------------------------------------------------------------
  ias-component/process-type/process-set:
      default_group/oafm/default_group/
  
  Error
  --> Process (index=1,uid=142035789,pid=18262)
      failed to start a managed process after the maximum retry limit
      Log:
      /u01/applr1211/VIS/inst/apps/VIS_server01/logs/ora/10.1.3/opmn/default_group~oafm~default_group~1.log
  
  
  04/22/10-20:24:05 :: adoafmctl.sh: exiting with status 204
  
  =========================

  Thank you very much
  
  MsK

  Hello

  Please see if the solution to (Note: 412980.1 - oafm, forms and the oacore does not start after change of IP address) help.

  Kind regards
  Hussein

• patch applTier in ebs R12 RAC environment.

  Dear Sir
  
  Please give me some ideas how to fix in the CARS and approx.
  I have patched in single instance before but never in the CAR with several nodes.
  I have
  dbTier = 2 node RAC database 10.2.0.4
  ApplTier = 2 nodes (ebs R12 rub6)
  should I run adpatch on the two applTier?
  
  Thanks in advance for your help.
  
  Kind regards

  Hello

  in 2 appl environment, be it records the same patch to the database two times?

  It will be saved once, so if you query AD_BUGS for the patch, you will find an entry.

  Kind regards
  Hussein

• Problem with fs_clone adoption after upgrade to R12.2.3 on the instance of SCREWS

  I installed instance EBS R12.2.0 Vision on Oracle Linux Server version 6.5 x 86-64 with Unbreakable Enterprise Kernel Module 3 (3.8.13 - 16.2.2.el6uek.x86_64) and then updated to R12.2.3.  Everything went smoothly with the initial installation, the AD and T2K patches and the adoption patch cycle to 12.2.3 update.  I'm having a problem with the fs_clone running, which is the first step of the subsequent update of doc 1586214.1.  The other phases of the adoption ran OK see below.  Also here is the error I get and you want to know if anyone has experienced this or ideas?  I searched google and MOS but couldn't find a direct hit.  I'm new to adoption and struggling to solve it... any help would be appreciated. I ran to the stage of fs_clone once or twice but I got the same result.

  adoption-status-detail (it is the cycle of update R12.2.3).  Every step seems OK here.

  Current patch ID of Session: 4

  Name of node node Type Phase status started completed elapsed
  --------------- --------------- ----------- --------------- ------------------------------ ------------------------------ ------------
  HN-s-sb13 master PREPARE ENDED December 27, 13 09:27:31 - 05:00 27 December 13 09:55:35 - 05:00 0:28:04
  APPLY FULL 27 DECEMBER 13 10:11:53 - 05:00 27 DECEMBER 13 09:35:53 - 05:00 11:24
  FINALIZE ENDED 28 DECEMBER 13 09:28:46 - 05:00 DECEMBER 28, 13 09:29:52 - 05:00 0:01:06
  FAILOVER COMPLETED 28 DECEMBER 13 09:32:12 - 05:00 28 DECEMBER 13 10:05:35 - 05:00 0:33:23
  CLEANING ENDED 28 DECEMBER 13 10:25:22 - 05:00 28 DECEMBER 13 10:48:31 - 05:00 0:09:23

  
  Folder synchronization system used in this Patching Cycle: None
  Generate full ADOPTION status report to the location: /u01/oracle/VIS/fs_ne/EBSapps/log/status_20131229_120910/adzdshowstatus.out
  Please wait...
  Done...!

  adopted out with status = 0 (success)

  From txkADOPPreparePhaseSynchronize_Sat_Dec_28_12_40_05_2013.log:

  ---------------------------------------------------------------------------------------------

  ==========================
  SetCloneStatus() inside...
  ==========================

  Generation SQL file: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGISTER-ORACLE-HOMES.sql
  SQL command: UPDATE ad_adop_session_patches SET clone_status = "cancel the REGISTRATION-ORACLE-HOMES ' WHERE State = ' no AND numero_de_bogue = 'CLONE' AND node_name = 'hn-s-sb13' AND adop_ses
  sion_id = 5;
  Run the SYSTEM command: sqlplus * @/ u01/oracle/SCREWS/fs_ne/EBSapps/log/adoption/5/fs_clone_20131228_123623/VIS_hn-s-sb13/TXK_SYNC_create_Sat_Dec_28_12_40_05_2013/5_DEREGI
  STER-ORACLE - HOMES.sql
  EXIT STATUS: 1
  SQL execution went through successfully.
  LOG FILE: / U01/ORACLE/SCREWS/FS_NE/EBSAPPS/LOG/ADOPTION/5/FS_CLONE_20131228_123623/VIS_HN-S-SB13/TXK_SYNC_CREATE_SAT_DEC_28_12_40_05_2013/5_DEREGISTER-ORACLE-HOMES. OUT.
  FATAL ERROR *.
  PROGRAM: (/ u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl)
  TIME: Sat Dec 28 12:42:54 2013
  FUNCTION: main::runFSCloneApply [level 1]
  ERRORMSG: /u01/oracle/VIS/fs2/EBSapps/comn/clone/bin/adclone.pl does not pass successfully.

  From adop_20131228_123623.log:

  -----------------------------------------------

  ADOPTION Session ID: 5
  Phase: fs_clone
  [BEGINNING 2013/12/28 12:39:57] fs_clone phase
  [EVENT]     [BEGINNING 2013/12/28 12:40:01] Clone BY following the steps
  [EVENT]     [BEGINNING 2013/12/28 12:40:02] Patch CLONE of the file system to perform file system
  [EVENT]     The call: /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl
  [STATEMENT] Output directory: / u01/oracle/SCREWS/fs_ne/EBSapps/log/adoption/5/fs_clone_20131228_123623/VIS_hn-s-sb13
  [UNEXPECTED] Error occurred during execution of < perl /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOPPreparePhaseSynchronize.pl - contextfile = / u01/oracl
  e/VIS/fs2/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml-patchcontextfile=/u01/oracle/VIS/fs1/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml - promptmsg = hide - co
  mark = off - mode = create - sessionid = 5 - timestamp = 20131228_123623 - outdir = / u01/oracle/SCREWS/fs_ne/EBSapps/log/adoption/5/fs_clone_20131228_123623/VIS_hn-s-sb13 >
  [UNEXPECTED] Error occurred while CLONE Patch File System to run file system using the command: perl /u01/oracle/VIS/fs2/EBSapps/appl/ad/12.0.0/patch/115/bin/txkADOP
  PreparePhaseSynchronize.pl-contextfile=/u01/oracle/VIS/fs2/inst/apps/VIS_hn-s-sb13/appl/admin/VIS_hn-s-sb13.xml - patchcontextfile = / u01/oracle/SCREWS/fs1/inst/apps/VIS_hn-s-sb1
  3/appl/Admin/VIS_hn-s-SB13.XML - promptmsg = hide - console = off - mode = create - sessionid = 5 - timestamp = 20131228_123623 - outdir = / u01/oracle/SCREWS/fs_ne/EBSapps/log/adoption/5/fs_clone_20
  131228_123623/VIS_hn-s-sb13 >.
  [PROCEDURE] [BEGINNING 2013/12/28 12:42:55] Check and stop Patch Server Admin
  [STATEMENT] select count (1) of ad_adop_session_patches
  where applied_file_system_base = ' / u01/oracle/SCREWS/fs2 ' and
  patch_file_system_base = ' / u01/oracle/SCREWS/fs1 "and
  numero_de_bogue IN ('CLONE', 'CONFIG_CLONE') and
  status (', 'F')

  [STATEMENT] There is a clone session waiting for/u01/oracle/SCREWS/fs1.
  [STATEMENT] Jumping to check and stop the Patch Server Admin step.
  [PROCEDURE] [END 2013/12/28 12:43:01] Check and stop Patch Server Admin
  [UNEXPECTED] fs_clone phase completed with errors/warnings. Check the log files
  [PROCEDURE] [BEGINNING 2013/12/28 12:43:03] Unlock sessions table
  [STATEMENT] SQL stmt: start
  AD_ZD_ADOP. UNLOCK_SESSIONS_TABLE('hn-s-sb13',60,2);
  end;
  >

  [PROCEDURE] [END 2013/12/28 12:43:07] Unlock sessions table
  Log file: /u01/oracle/VIS/fs_ne/EBSapps/log/adop/5/adop_20131228_123623.log

  Randy,

  Looks like you need to add more space to the directory/tmp, I see the following entries in the CLONE*.error file.

  CLONE2013-12-28_12-41-01 PM .error:

  =================================

  SEVERE: 28 December 2013 12:42:46 - ERROR - CLONE-20275 not enough space to create/tmp/CLONINGCLIENT8522798570339051663.

  SEVERE: 28 December 2013 12:42:46 - CAUSE - CLONE-20275 minimum required space was at '1 798' Mo, but only '1 737' MB was available for use.

  SEVERE: December 28, 2013 12:42:46 - ACTION - CLONE-20275, make sure that the minimum required space is available for use.

  GRAVE: 28 December 2013 12:42:46 - ERROR - CLONE-20233 restoration Middleware House for sourceid 'mwhome1@FMW_Home' failed.

  GRAVE: 28 December 2013 12:42:46 - CAUSE - CLONE-20233 an internal operation failed.

  Thank you

  Hussein

• Installation failure: EBS R12.2.5 on Windows Server R2 Standard 2012

  Hello

  I install EBS R12.2.5 VISION Instance on Windows Server 2012 R2 Standard, that is certified. I downloaded the media and made the scene and complete the prerequisites.

  I installed it, under Tools before building the stadium and run rapidwiz

  • Microsoft Visual Studio Express 2013 for Windows Desktop ()Doc ID 1330706.1()
  • Cygwin (Doc ID 414992.1( )

  Then build step, all right.

  Checked it the rapidwiz version:

  C:\stager122\startCD\Disk1\rapidwiz > RapidWizVersion.cmd

  Oracle E-Business Suite quick installation wizard

  Version 12.2.0.50

  (c) copyright 2000-2011 Oracle Corporation.  All rights reserved.

  Press a key to continue...

  Then I run the RapidWiz.cmd to install...

  at 29%, I got an error, the error detail is given below:

  C:\Users\ADMINI~1\AppData\Local\Temp > C:\stager122\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java - cp C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\... \j11067592_fnd.zip; C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\ASInstallHome\fnd\java\3rdparty\stdalone\xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=C:\oracle\app\VIS\fs2\EBSapps\appl\admin\VIS_srcebs\-Doracle.apps.fnd.txk.runtime.config=C:\oracle\app\VIS\fs2\inst\apps\VIS_srcebs\temp\xmldocs\instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: FileSys OS COMMAND Failed: out = 3 see the log file for more details. CMD = cmd /c rmdir /s /q C:\\oracle\\app\\VIS\\fs2\\FMW_Home\webtier\OPatch # node = NodeId = 1698 Type = 24 TypeName = filesys_patch_action Name = RefId = State 901 = init ConfigDoc = APPS_OHS_HOME ParentDoc = null topology = R12 Action = os_cmd

  at oracle.apps.fnd.txk.config.FileSysPatchActionNode.doFileSysOSCmd(FileSysPatchActionNode.java:169)

  at oracle.apps.fnd.txk.config.FileSysPatchActionNode.processState(FileSysPatchActionNode.java:101)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  C:\Users\ADMINI~1\AppData\Local\Temp > if 1 == 0 goto: INSTAS_OK

  C:\Users\ADMINI~1\AppData\Local\Temp > echo cannot install specific patches

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  APPL_TOP install the driver running for instance SCREWS

  I tried many things, re-download the error also, but always the same media.

  Kindly help me.

  Thank you and best regards,

  Waqas

  With the help of VMWare he can't.

  Using Oracle VM VirtualBox, as successful.