New Ideapad Y510p crashes/completely off when the games

Similar Questions

• Hi, my Aspire E15 completely off when the charger is out. Does not start without power cord

  I have an Aspire e15 start ES1-512-C5YW which I brought last Monday and it was all fine until yesterday whn the power cord came out pf the socket and wull no longer work on battery.

  I have two acer power cords and it happens with both of them, but the cords work very well with the other Acer I

  Thrre is without a removable battery in this laptop so im a little need help!

  norfolkNman,

  No problem, nobody WANTS their stuff does not work. MOM

  Do you have it up and running rights?

• Qosmio X 770-Crash Dump when the games

  Hope this is the right forum for this.

  I am retired and have minimal knowledge of technology, although I've used them for many years.

  In the 5-6 months, I get a crash dump on my laptop whenever I enter a game when the computer is turned off. I only played two games - WoW and Guild Wars 2.
  Keep a single file is shown on the blue screen - nv1ddmkm.sys.

  Whenever the discharge occurs I get the screen restart and I choose 'normal mode '.
  I then have all the other problems as long as I do not turn off the computer.

  I noticed that when this happens, the Nvidia graphic card not more appears in Device Manager and is no longer recognized by the computer (I tried a new Toshiba for Nvidia driver installation, and the installation stopped - saying my that no such system existed).

  Also after one of these accidents, WoW put up a box suggesting that I should update my Intel HD Graphics driver.

  When I do a "cold start" (machine is turned off for a period of) the Nvidia card appears in the Device Manager again and I can do a clean install of the driver.
  I have the latest version of the driver provided by Toshiba (a date in 2011).

  _This problem only occurs when the games. _
  Y at - he at any time, including watching Youtubes or DVD, any problem.

  When you play Wow I must have my graphics settings on "Fair" - the same that I used to use on my old desk. I bought the Qosmio, as it was marketed as a gaming machine.
  I feel as if I made a really stupid decision to buy.

  Can I get advice as to whether it is a software problem - and, if so, how I can fix it. or is it a hardware problem with my Nvidia card? I am inclined to believe that a card problem can be very expensive to fix, or not at all.

  My rear cynicism it's ugly head that my warranty missed last December.

  > Keep a file is shown on the blue screen - nv1ddmkm.sys

  This file belongs to the nVidia graphics card driver, and I think that the cause of the graphics card of this issue.

  > This problem occurs only when the games.

  The problem could be the high temperature.
  Constraints of the game and load the CPU and especially the GPU (graphics chip). The two parties to limit and creates a lot of heat. This is why I think that the high temperature can be the cause of your problem.

  Never clean the grids and the cooling fans in the past?
  From time to time it s a good idea to clean the fans because dust can affect the circulation of air and cooling performance. In this case I recommend to get rid of the dust using a jet of compressed air.
  It should be good enough.
  If it wouldn't help you much, the device must be cleaned professionally.

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• TRYING TO PLAY THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  Original title: papabob68

  have windows 7-

  I'M PLAYING THE GAME "PANZER GENERAL 2, WHEN THE GAME STARTS TO RUN THE BROWSER CRASHES.

  After that, I have to go to master to stop and start again... I have read all the post I can find and I updated the driver and reset the display and SO ON, SO ON, AND...

  I played this game on windows xp and I have done everything but put A BULLET in it and I think about IT!

  I'd be willing to by a new game made for windows 7 but does...

  MANY OF THE POST TALK ABOUT A 64-BIT SYSTEM, BUT MINED IS A 32-BIT, SO THERE HAS NOT BEEN TWO MANY ANSWERS...

  "HELP!" @!@!

  PAPABOB68

  "I updated the driver and reset the display and SO ON, SO ON, AND ON...". »

  It is better to translate 'SO ON'... to something specific, or you can read suggestions for

  have you tried things once again.

  -Include your brand of processor graphics and model as well.

  -The best place for the hotfixes to vintage games is usually on a specific to this game fan site,

  or the developer forums, but...

  "but mine is 32 bits"

  (Assuming you are using the disk depending on the version of the game.)

  -A 32-bit Windows can be an advantage with some games of this vintage (release date of 97) as

  always use a 16-bit Installer, which will run on 32-bit but not 64-bit of Windows.

  Apart from that, there should be no difference between the OS versions for compatibility.

  -However, prior to version 2000 games (and some newer), may have other

  questions that make them run poorly. Audio and color are two common problems.

  -The camera may result from a problem with earlier versions of Open GL, Direct 3D.

  DirectPlay and Glide3D (gone, but not forgotten) can be a problem sometimes too?

  These questions sometimes have patches on based fan sites.

  -Some 97 games maybe still based back that requires using the window BACK, an emulator "BACK."

  Good old games sells some vintage games with DRM (copy of code protection) removed, and installs

  with BACK box automatically.

  They have Panzer General 2 for $10 USD, but if you expect one of their frequent sales you should be

  able to pick up for US $5-$ or less.

  http://www.Gog.com/

  [ EDIT: just watched add it, and it seems to be a DirectX game 9] It must have been updated DX9

  for the downloadable version.

  It can been Direct3D when released.  DX 9 was not released before 2002

  -All on the theme of DirectX. If you have not updated DirectX, you should do it.

  Win7 is not the most recent DX 9, 10 or 11 files when first installed.

  Download installer Web Runtime DirectX end-user of the official Microsoft Download Center ]     

  -You can also use D-Fend Reloaded, which is a user interface that reduces the learning curve for the DOS window.

  The download includes the box and a few BACK based games start practicing.

  D - Fend Reloaded: overview

  Finally, and above all by an effort... An important announcement for all users of the disk based games.

  -A new (since Win10) problems with the old disk based games comes from malicious software developed by MS - DRM blocking.

  If your disc games has a file called - secdrv.sys - on it, the game will be blocked by a

  Windows 'security update' - KB3086255-.

  I have more information about the blocking of the DRM, including how to work around this - here -

  .

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

  Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

  This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

  Help!

  The laptop is a year old.

  I already ran the diagonsitic battery and it said the battery was good.

  OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

  Here are the parameters:

  reserve battery level (this is when the popup will appear).

  10%

  low battery (this is when the low battery action will be performed).

  8%

  critical battery level (my computer would die at this point.)

  7%

  low battery action: sleep, sleep (this customize to your liking).

  battery low notification: on (hold on).

  critical battery action: sleep, sleep (my computer died already in criticism.)

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

  HP printer all-in-one B210a win 7 64 bit.

  no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

  First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

• Accelerometer turns off when the screen is off

  When testing my application on a Z10 android port the accelerometer turns off when the screen is off. A partial wake lock does not turn the sensor back on. A wake dim screen lock is needed to re - turn on the detector. This behavior forces the screen to be all the time when an application requires the use of these sensors.

  An example would be a pedometer recording the steps throughout the day. In order to operate the screen must be turned on by the application that runs in the background. This will cause a fast draining of the battery and is not an acceptable solution.

  On Android, a partial wake lock is enough to keep the accelerometer running.

  I think this should be reported as a deficiency, a lot of motion carried since Android applications will be blocked by this and my app port is one of them.

  Tested on system Z10, model number STL100-3. Version of the 10.1.0.273 software

  The fix will appear in MR 10.2, 10.2.1 aka.

  I recently submitted a fix for the problem.

• Star Wars: Republic Commando. Worked on Vista, the problem is that when the game tries to load the first mission, he leaves the game

  Star Wars: Republic Commando. Worked on Vista, the problem is that when the game tries to load the first mission (the only one available for a new player) outputs of the game and gives the following. I hope this info is useful to anyone who is willing to take the time to help me. Thank you-Zachert45

  Details:

  Problem event name: APPCRASH

  Application name: SWRepublicCommando.exe

  Application version: 0.0.0.0

  Application timestamp: 41f707e4

  Fault Module name: StackHash_1a02

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception Offset: 6 c 707544

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Information additional 1: 1a 02

  More information 2: 1a022ea3469ead417de7f3ac704042e3

  3 more information: aa4f

  Additional information 4: aa4f8516a5b4c2bae31f69214dbeb837

  In addition, the game made a newspaper that it lasted, if an error occurred. NOTE: Windows verson shown here was one of the many tests bring made, all ended the same way.

  Uninitialized: open the log file, 08/09/12 19:20:48
  Uninitialized: name subsystem initialized
  Init: Detected: Windows NT 6.0 (Build: 6000)
  Init: Build: 139
  Init: Version of the engine: 2226
  Init: Update: January 25, 2005
  Init: command line:
  Init: Base Directory: C:\Program Files (x 86) \LucasArts\Star Wars Republic Commando\GameData\System\
  Init: Character set: ANSI
  Journal: Related to Window.dll
  Journal: Related to Core.dll
  Journal: Related to frengine.dll
  Init: Subsystem of the initialized object
  Init: Computer: ZACHERT45HP
  Init: User: Zachert45
  Init: Of CPU Page size = 4096, processors = 4
  Init: CPU detected: type processor PentiumPro (GenuineIntel)
  Init: CPU features: FPU CMov EAP RDTSC MMX, SSE
  Init: CPU @ 2694 MHz
  Init: Total memory: Phys = 1048575 K Pagef = 2097151 K Virt = 2097024K
  Init: Working together: 32000 / 159000
  Init: Physical memory: 1023 MB
  Init: D3D Device: video memory onboard: 1008
  Caution: Charge Dynamics Engine.GameEngine
  Journal: Bound to CTGame.dll
  Journal: Bound to Gameplay.dll
  Journal: Related to IpDrv.dll
  Journal: Related to XInterface.dll
  Journal: Related to XGame.dll
  Init: Unreal engine initialized
  Journal: Related to WinDrv.dll
  Init: Client initialized
  Journal: Related to D3DDrv.dll
  Init: Direct3D detected adapters:
  Journal: aticfx32.dll/Radeon HD 6470 M
  Init: D3D Driver: MaxTextureBlendStages = 8
  Init: D3D Driver: MaxSimultaneousTextures = 8
  Init: D3D Driver: MaxActiveLights = 8
  Init: D3D Driver: MaxPrimitiveCount = 5592405
  Init: D3D Driver: MaxVertexIndex = 16777215
  Init: D3D Driver: MaxStreams = 16
  Init: D3D Driver: MaxStreamStride = 508
  Init: D3D Driver: MaxVertexShaderConst = 256
  Init: D3D Driver: VertexShaderVersion = 1.1
  Init: D3D Driver: PixelShaderVersion = 1.4
  Init: D3D Driver: support AGP detected
  Init: D3D Driver: using w-pixel fog
  Init: D3D Driver: trilineaires media
  Init: D3D Driver: supports BLENDDIFFUSEALPHA
  Init: D3D Driver: Supports LOD bias
  Init: D3D Driver: Supports Z polarization
  Init: D3D Driver: supports D3DTOP_ADDSIGNED2X
  Init: D3D Driver: supports D3DTOP_BUMPENVMAP
  Init: D3D Driver: supports D3DTOP_BUMPENVMAPLUMINANCE
  Init: D3D Driver: supports D3DTOP_DOTPRODUCT3
  Init: D3D Driver: supports D3DTOP_MODULATEALPHA_ADDCOLOR
  Init: D3D Driver: supports D3DTOP_MODULATECOLOR_ADDALPHA
  Init: Unreal Engine Direct3D support - internal version: SB3
  Init: D3D Device: szDriver = aticfx32.dll
  Init: D3D Device: szDescription = Radeon HD 6470 M
  Init: D3D Device: wProduct = 8
  Init: D3D Device: wVersion = 17
  Init: D3D Device: wSubVersion = 10
  Init: D3D Device: wBuild = 1065
  Init: D3D Device: dwVendorId = 4098
  Init: D3D Device: dwDeviceId = 26464
  Init: D3D Device: dwSubSysId = 370806844
  Init: D3D Device: dwRevision = 0
  Init: D3D detected: ATI video card
  Init: D3D Device: using cubemap [with mipmaps]
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticDiffuse
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularMatte
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularDull
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularPolished
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularShiny
  Journal: (Karma): Karma from beginning of game.
  Journal: (Karma): creation of MeAssetDB.
  Journal: (Karma): loading: ambient.ka
  Journal: (Karma): loading: clone.ka
  Journal: (Karma): loading: droid.ka
  Journal: (Karma): loading: geonosian.ka
  Journal: (Karma): loading: rasanimprops.ka
  Journal: (Karma): loading: trandoshan.ka
  Journal: (Karma): loading: turrets.ka
  Journal: (Karma): loading: vehicles.ka
  Journal: (Karma): loading: wookiee.ka
  Journal: (Karma): finished creating MeAssetDB (27 properties).
  Log: Watermark memory pre load: 0
  Journal: Preload for entry Stats: 58 opened, looking for 269, dumpsters 954, bed 46950 KB / 4329, serialize 44419 KB / 1615039
  Journal: LoadMap: entry 08/09/12 19:20:49
  Log: Watermark memory pre load: 1
  Caution: Charge Dynamics Entry.myLevel
  Journal: Loading times for the entry: 0.000 sec total, 0.000 app
  Connection: Time entry init actor coll: 0.000 sec total, 0.000 app
  Journal: Play class is "GameInfo."
  Newspaper: The level is level Entry.myLevel
  Newspaper: * WARNING - paths is maybe NOT INVALID *.
  Journal: What is the Entry.myLevel level to play (0) 08/09/12 19:20:49...
  ScriptLog: InitGame:
  ScriptLog: Mutator database is Entry.InGameTempName
  ScriptLog: GameInfo::InitGame: bEnableStatLogging False
  ScriptLog: MusicStat is InGameTempName
  Connection: Time entry init BeginPlay: 0.000 sec total, 0.000 app 08/09/12 19:20:49
  Log: Watermark memory Post charge: 2
  Connection: Time entry init: 0.000 sec total, 0.000 app
  Journal: Entry file load stats: opens 2, looking for 4, 9 trucks, 31KO bed / 16, serialize 7KO / 2092
  Connection: Exit LoadMap 08/09/12 19:20:49
  Caution: Charge Dynamics UDebugMenu.UDebugRootWindow
  Caution: Charge Dynamics UDebugMenu.UDebugBlueLookAndFeel
  Journal: Related to ALAudio.dll
  Init: AL_VENDOR: Creative Labs Inc.
  Init: AL_RENDERER: software
  Init: AL_VERSION: OpenAL 1.0
  Init: AL_EXTENSIONS: EAX 2.0, EAX, EAX, EAX 4.0 3.0 unified and EAX - AC3
  Journal: 16 Sources AL Audio created!
  Init: ALAudio: initialized subsystem.
  ScriptLog: 255 team
  Journal: (Karma): KInitSkeletonKarma: framework, but not of the world.
  Init: System initialized to input InGameTempName
  Journal: Open window
  Journal: Couldn't put the window in the foreground.
  Journal: Enter SetRes: 1024 x 768 full screen 0
  Journal: Using back buffer 22 (32-bit) format
  Journal: Using format 77 (32-bit) depth buffer
  Journal: Creation of device
  Init: D3D Driver: CreateDevice: will use the hardware transformation and lighting.
  Init: D3D Driver: CreateDevice: will use hardware vertex processing
  Journal: Create context of the EMI.
  Init: Init game engine time: seconds 1,366000 total 1.014007 app
  Journal: Game init load stats: opens 2, looking for 11, 61 Skips, bed 445 KB / 141, serialize 268 KB / 190555
  ScriptLog: MenuOpen: XInterfaceCTMenus.CTStartPCMenu (RESET)
  Caution: Charge Dynamics GUIContent.Menu.RC_title_bg
  Journal: StartMovie with m_PlaybackRect (0, 0), (1024, 768)
  Connection: Start time: 1,177000 seconds
  Newspapers: Lots static mesh: 0 bytes of vertex, 0 bytes index
  Journal: StartMovie with m_PlaybackRect (0, 0), (1024, 768)
  Journal: Precaching: Entry.LevelInfo0
  Journal: Allocation of the dynamic index buffer 16384 bytes.
  Log: Precache time geometry: 0.006 sec total, 0.000 app
  Journal: Texture precache time: 0.009 s total, 0.000 app
  Journal: Statistics of load precache entry: opens 5 to 0, seeks 10 jumps, bed 1512 KB / 28, serialize 1496 KB / 142
  Journal: 131072 bytes dynamic vertex buffer Allocation.
  Caution: Charge Dynamics XInterfaceCTMenus.CTMenuMain
  Journal: GotoMenu (InGameTempName)
  Journal: StartMovie
  Journal: CallMenu (InGameTempName)
  Journal: GotoMenu (InGameTempName)
  Journal: CloseMenu()
  Journal: Browse: PRO? Name = zach? Class = CTCharacters.PlayerCommando? Team = 255 08/09/12 19:21
  Log: Watermark memory pre load: 2
  LOG: Preload PRO Stats: 2 opens, looking for the 14, 15 jumps, bed 1315 KB / 56, serialize 1289 KB / 23365
  Journal: LoadMap: new level of loading. Pause/stop implementing caching of files.
  Journal: Unloading: PRO package
  Journal: LoadMap: PRO? Name = zach? Class = CTCharacters.PlayerCommando? Team = 255 08/09/12 19:21
  ScriptLog: stop menu movie
  Journal: Garbage collection
  Journal: Serving garbage
  Journal: Garbage: objects: 23768-> 23528; REF.: 232574
  Journal: FName High Watermark: 33191
  Journal: Number current FName: 30109
  Journal: FName slots available: 3082
  Journal: UObject High Watermark: 23774
  Log: Watermark memory pre load: 3
  Caution: Charge Dynamics PRO.myLevel
  Journal: 131072 bytes dynamic vertex buffer Allocation.
  Journal: (Karma): initialization Karma for the level.
  Journal: (Karma): Autodetecting CPU SSE
  Journal: (Karma): using SSE optimizations
  Newspapers: Loading PRO time: 0,356 total sec, 0,328 app
  Connection: Hour PRO init actor coll: 0.000 sec total, 0.000 app
  Journal: Play class is 'CTGameInfoSP '.
  Newspaper: The level is level PRO.myLevel
  Journal: What is the PRO.myLevel level to play (0) 08/09/12 19:21...
  ScriptLog: InitGame?: Name = zach? Class = CTCharacters.PlayerCommando? Team = 255
  ScriptLog: Mutator is PRO. InGameTempName
  ScriptLog: GameInfo::InitGame: bEnableStatLogging False
  ScriptLog: MusicStat is InGameTempName
  WARNING: PlayAnim: not found "ActionBreathe" sequence for the mesh "CloneBoy."
  ScriptWarning: PawnFactory PRO. PawnFactory2 (function CTGame.Factory.PostBeginPlay:0058) Factory PRO. PawnFactory2 has no prototype!
  WARNING: PlayAnim: not found "ActionBreathe" sequence for the mesh "GunshipBall."
  ScriptWarning: PawnFactory PRO. PawnFactory0 (function CTGame.

  I read the fix below on three different forums.
  Seems to work for some. Especially those with Pentium cpu.

  "In the main Menu, select Options-> graphics. Variation in the quality of the low relief map. When I have it on medium or high, it crashes. »

  The game was released in ' 05, a bad year for compatibility issues with different
  DRM and Win7. If the problem is with the Launcher, then a noCD fix would be a good solution.
  http://MegaGames.com/games/Star-Wars-Republic-Commando

  .

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.

• Satellite Pro A200 (PSAE4E) - power off when the AC adapter is connected

  I bought this laptop for my wife about 2 years, since about 6 months ago, that the laptop was randomly shut off without warning, this only seems to happen while the power supply is connected as well.

  I have read several other posts on other sites with people having similar problems.

  There are various suggested corrections, you must disable the duel core in the bios so that it works only on one heart and he spend dynamic low for fans. I did this about 2 hours ago and touchwood not a single switch off again. This however is not an acceptable solution, there is obviously much more slowly.

  Another suggestion has been updated the bios, I downloaded it now but am very worried to run it, this laptop can stop at any moment, lasting from a few minutes to a few hours. If it stops while updating to bios, I doubt that it would be good news. I don't want to make it work on the single core for the rest of the day/night to see if its stable and then go for it.

  Before that, can I make a call to the toshiba helpline, I read on the forums that this is as well a defect of design within the laptop and there's a reminder of some of the laptops in the Canada, I do not know how it rings true but still a concern to read and might be unacceptable to the owners of the A200.

  Others have advised that it is an overheating problem, it's that I reject, I running SpeedFan and showing a stable 47 temp and it allows to switch off the coast immediately when turned on, yes it could be due to dust build up, something I checked and cleared, it did not a difference for the frequent switch offs.

  Im not too well why it is only when the power supply is connected, I have not tried a different PSU, but those who have had the same problem try this and it has not solved the problem.

  When I unplug my power as well the battery seems last mabye 5 minutes at the most.

  Overall, Im very unhappy all this, toshiba is a brand of 'high' where you expect better quality and pay for it.

  If anyone has any suggestions please let me know, would be also good to hear talk of toshiba support on the issue.

  Concerning
  Florence

  Hmmmmm... interesting.

• System suddenly turn off when the external display is connected

  I have problem with my system. every time I connect a projector or a HDMI my system stays for a short time and shuts...

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.

  1. The computer completely off, or only the monitor turns off?
  2. You get an error message or a blue screen while the system is turns off? If Yes, what is the exact error message you get?
  3. What is brand and model your computer?
  4. Apart to plug the projector, does this problem occurs in all other conditions also?
  5. What happens when you try to turn on the computer later, with a projector connected?

  I suggest you to check if the computer shuts down completely or only the monitor turns off. If the computer shuts down, the problem may reside with the graphics card driver that fits inconsistent or has become unstable or corrupt. Therefore, I would suggest trying the following steps and check if the problem persists.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  Hope this information is useful. If the problem persists, please post back with answers to questions for assistance, we will be happy to help you.

• Display crashes, EXCEPT when the games

  Comprehensive have searched the net for my problem and I have not found a solution that works. My display driver crashes randomly when surfing the web. My screen turns off, but the computer still works, I know because I always hear people in video chat and youtube videos. The only way I can prevent that from happening is to launch a game. If I don't play a game crash. I can also minimize a game to the taskbar and not crash. I thought that if I adjusted the tension on my graphics card it would keep happening, but unfortunately after trying several times it does not work. I'm initially thought it was my graphics card, but have since passed on the old card and have the same problem. I also tried to disable all the services. Updated my motherboard Bios. Graphics drivers updated, restored drivers graphics. Tested my ram and checked my power options in Control Panel.

  My system:
  Core 2 Quad 9550 Q
  Motherboard Asus Rampage Formula
  8 GB kingston hyper x ram cl5
  Gigabyte Radeon R7 260 X graphics card
  Windows 7 ultimate

  Any ideas would be appreciated

  Hi Michael,

  Thanks for the reply.

  I suggest you follow the suggestions and check them off below if it helps:

  Method 1: Test of memory

  How to start the Diagnostic tool memory in Windows 8

  In the Windows 8 operating system, you can move the cursor to the bottom right and click on the search box. In the search box, you can specify what you want.

  In the search box, you can type the name of the "Control Panel" and click on the control panel.

  After opening the Control Panel, you will see many programs such as the system, network and security, Internet, hardware and sound, and other programs. You click on the "system and security"

  In this step, you click on the 'administration tool' in the 'system and security. "

  In the administrative tool window, you will see a list of options. You click on the "Windows Memory Diagnostic".

  A is displayed. You will see "Check your computer for memory problems" you click on "restart now and Check for Problems '

  If you click to restart, then the Memory Diagnostic tool Windows starts check and automatically restarts and displays the result.

  Method 2: update the BIOS and drivers from the chipset

  Sometimes, your computer has the latest drivers for chipset and BIOS.

  Please visit the website of the motherboard manufacturer for the latest version of the BIOS and chipset drivers and install it on the computer.

  https://www.ASUS.com/motherboards/RAMPAGE_FORMULA/HelpDesk_Download/

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also use the link below to visit the Intel Web site for an automated tool that checks for the latest drivers and install it on the computer.

  http://www.Intel.com/p/en_US/support/detect

  Hope this information helps, please reply if you need assistance.