Echo audio

Similar Questions

• Remove echo audio using adobe audition

  Hi all

  I am new to adobe audition software, I watched a few courses and read a few articles and I am unable to find a solution to remove the echo of an audio recording of the file or voice. Guide please how can I remove echo.

  Thank you.

  I'm afraid that you do not find what does not exist. What you try to do, is like trying to unbake a cake. You have mixed the ingredients and put them in the oven – this changes and binds their relationship permanently. Exactly the same happens with the reverberant sound in a room. The reverberated sound mixes with the sound direct and all simply not be mixed again. There are apparently a few algorithms around this trial to mitigate the effects of this - which is a bit like trying to isolate one of the ingredients baked in the cake and destroy it. But as Bob says, you end up destroying other parts of your cake in the process, effectively making it inedible.

• The echo during calls

  I have problems with my own voice echo to me during calls sometimes. Is it for someone to another expreriencing this?

  The only known problem that is being investigated on the echo / audio blurred is when you are in a coverage area is very low and just before the general appeal falls. Please let me know if it has any other call audio problems.

• Echo on LINE IN Windows 7, map mother Gigabyte GA-Z77-D3H, VIA its Tech edge.

  I have a new PC with Windows 7 and I get and echo audio when you use LINE IN.  If I turn off LINE IN I can still hear sound but without the echo, but this does not solve the problem that the program I want to run do not receive then all sounds.  Have updated the card driver sound for the VIA Tech on board sound.  Motherboard is Gigabyte GA-Z77-D3H.

  Hello

  Go to control panel, hardware and sound, Sound.
  Now go to the recording tab, choose "Line IN", and then click Properties.
  Go to the listen tab and uncheck the box "listen to this device.
  That should do it.
  Carlos

• Echo deleting

  Have a number of files WAV (narration only) and it has echo in the original recordings, in a way, introduced by the microphone, the environment or the computer, they were recorded on. I found ways to add the echo but nothing to remove it. Someone knows how to do this?

  Thank you.

  Not really possible. There are plugins that can slightly reduce the undesirable reverberation but come at a cost. None are really 100% effective or they spoil the audio search if you apply too much reduction. They all seem better to work on impact looks rather than speeches solo drum kits. But some have available free trials to see if they had a job for you.

  See this thread Remove echo audio using adobe audition

• Satellite M50 - big echo during playback of any audio file type

  My M50 developed a problem with its sound just now.

  When you play ANY type of audio file (music/MP3, internet/YouTube, Windows Media Player, no matter), sounds are played with a great echo.

  Opening the window of TOSHIBA Virtual Sound Settings and settings, don't change anything. In fact, I can't change anything - if I set the speaker type (say 'built in speaker' on 'closed type headphones', the sounds are the same.)

  I don't remember when the problem arises, but it seems to coincide with the upgrade to SP3 of XP. (I'm under XP Home).

  Any ideas?
  Thank you

  Hello

  I believe that no one will be able to say with certainty what the problem is here. I can imagine that Sp3 installed something and now there's this strange sound question.
  But I guess it's because of the sound settings. I don't know what player you use but check it please equalizer. Maybe there's something you can change and have good sound back.

• echo of power through my speakers to the audio system

  On June 17, 2012 I started having headaches back echo feed through my laptop (Latitude D600) speaker system, it was the first time I've ever had this problem. The first thing I did was run the Microsoft Fixit Audio Play Back. The results were no problems found. Then I ran IOBit Advanced System Care. No problem found the results. Then I opened a system audio through Control Panel, clicked on a video and worked the tools of control volume & balance read audio voice while listening to the video. Cause no effect on the problem. Then, I uninstalled and reinstalled Adobe Flash Player & Java. Results still have the problem. Extensions in Firefox extension Adblock Plus, Ghostery & WOT. Disabled Extensions Microsoft Net Framework Assistant & Zone Alarm engine research. Permit Plugins, Java Deployment Toolkit, Java platform. Disabled Plugins, Microsoft DRM, VLC Web plugin, Windows Media Player in Dynamic Link Library, & Windows Presentation Foundation. Need help on what to do next.

  Thank you Eagle Fulton

  You probably have the "listen" checked.  Listen to is like a mixer that mixes the microphone and speakers.  Set too hard, that he's giving your comments

  Course, if I knew what OS you have, I could tell you wjere is but I don't

  We are not in a position to help unless you help by providing us with as much information as possible.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• the echo of my audio speakers

  ????

  my echo of speakers, just happened when I started today. How do I change this setting?

  replied in the other thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/my-audio-speakers-echo-just-happened-when-i-booted/1ad7a775-d1a5-4288-A2F5-724fae0ac172

• No audio device, have a yellow question mark to Microsoft Kernel Acoustic Echo Canceller & Microsoft Kernel WaveAudio Mixer (HP Pavilion dv6103) portable

  Hi all

  I use a HP Pavilion dv6103nr Entertainment Notebook (Window XP).  Audio device was working before, but a few months ago the audio started does not (no sound cannot be played).

  When I go into control panel--> sound and devices Audio---> it is said that no. AUDIO DEVICE

  Then I go to control panel to control---> system---> hardware---> device---> sound, video management and game controllers---> I found a yellow question mark beside: MICROSOFT KERNEL annuleur of ACOUSTIC ECHO and another question mark yellow right next to: MICROSOFT KERNEL WAVE AUDIO MIXER.

  I then right click on each of these drivers and tried to update the two drivers (I've tried insert the recovery disk (it is the only drive that I got when I bought this laptop) and also I tried to install the software automatically, but these two options did not work.)

  Please tell what should I do now?  Already, I went to the HP site and looked for these two materials for a update but had no luck...

  PLEASE HELP ME OUT HERE!    I'M REALLY No.$ to BUY a NEW computer LAPTOP, BUT I NEED to USE AUDIO if BADLY... pls help = *) appreciate very much for all your help here!

  To troubleshoot sound problems

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01763067&cc=us&DLC=en&LC=en&product=3289548&tmp_track_link=ot_search

  AutoScan for lack of device drivers.

  http://h20614.www2.HP.com/ediags/GMD/welcome.aspx?LC=en&cc=us&product=3382292

  (2) drivers audio

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=228&LC=en&cc=us&DLC=en&sw_lang=&product=3289548#n198

  Good luck.

• Strange problem where first Pro CC plays ALL audio back with echo. Everyone has experienced this before?

  For some reason today when I opened a project I've been working recently in Adobe first CC, I found that all of the audio plays back with an echo. Each sequence, each original audio and video file synchronized, in several projects too. All this reading in the source monitor and on the timeline with enough echo I hear him linger a moment after I stop playback (it does not seem out of sync, does that echo hail to her). It is with a helmet and through my computer directly (I'm working on a Yosemite iMac running).

  I was editing this project recently and had not this problem - the strange part is that I can export properly without the echo, that his relief, but it would be nice to hear and edit the audio right on the timeline.

  Someone knows something like that? I'm browsing the audio settings to see if something was changed accidentally but don't really have to see anything in particular. Hope it's one of these bizarro problems fluke that attaches magically from one day to the next...

  SOLVED

  I was able to find a plugin for this EQ program audio stupid I had installed and thought I had completely deleted. It was called 'Hear', and I deleted the plugin and all components. Here, the sound issue disappeared.

  Thanks for all the ideas and solutions!

  -Katie

• I'm getting echo and reverberation in audio stream. This only happens on Firefox, IE works perfectly... I tried to turn off and restart in Safe Mode, any help?

  Radio streaming sound quality deteriorates quickly using Firefox with the echo and reverberation, making it impossible to listen to. Does not occur with IE. Any ideas what could be the prob? I prefer to use Firefox as my default but may have to go back to IE. Thank you

  This can be caused by a recent update of Flash 11.3.

  See:

  • https://support.Mozilla.org/KB/keep-Flash-up-to-date-and-troubleshoot-problems
  • https://support.Mozilla.org/KB/Flash-113-doesn ' t-charge-video-firefox
  • http://forums.Adobe.com/thread/1018071?TSTART=0
  • http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  You can also check the problems caused by other plugins.

  • https://support.Mozilla.org/KB/troubleshooting+plugins

• echo in an audio output

  I did simple VI which takes a sound input via microphone and gives the same as the output from the speakers. But in the output I echo to the sound input whose amplitude continue to increase. not been able to get this problem. Help, please. Thank you.

  It is well known as feedback. Read more about it here http://en.wikipedia.org/wiki/Audio_feedback

• Echo in my Audio

  Hello

  My name is Dylan.

  I had trouble with my audio for a while and every time I increase the volume to see that if what I have done to try to address worked, there is, his 'Machine Gun' when it crosses as 75. I almost all done. I had three different people help me and that they could not understand, and I remember they were on support staff, and they had me download new drivers, do a system restore and they had me go and update, and just about everything I could think to do. I went on YouTube to see if anyone posted anything in trying to solve the problem, which did not work. I'm about to buy a new computer if I can't solve this problem, which, REALLY, I don't have the money for.

  Hi Dylan,.

  Thanks for posting your request. Please click on this LINK and follow the post of Jared M for the troubleshooting steps on the issue. Please tell us how it goes.

  Kind regards

  Virfranz man

  If this answer helped you, please click on the Mark as answer button to help other users

• Apple TV 4th Gen Audio output

  I want to play music through surround sound in the basement and also echo a speaker floor upwards.  I have both put in place, but the menu will only allow me to select one or the other.  Will there be a software update that will allow the selection of the output multiple audio.  In the end, it would give me a whole House stereo system.

  Thank you

  I don't know if this method works with Apple TV 4, but it is a possible workaround:

  http://www.iLounge.com/index.php/articles/comments/streaming-to-multiple-airplay-Haut-parleurs-de-Pomme-TV

  The link to the wing in the article is broken so use this one: https://rogueamoeba.com/airfoil/

  Or use Apple TV comments and tell Apple you want several speaker support.

  TT2

• get an echo (repeat) when I record

  IMac 2.66 Ghz processor intel core duo

  4 GB memory

  Yosemite 10.10.5 os

  just downloaded the new upgrade to 10.2.4 logic

  has been slow loading and acting weird

  just tried to record an audio track, but there is an echo or repeat when I played my instrument as if I had a plugin active echo delay

  There are no plugins active on this track

  Would it because I need to upgrade to El Capitan?

  -That's just your comments? Cut your speakers and repeat the test or headphones and save another test.

  I suspect you have something is misconfigured, you shouldn't have played live sound when you get a microphone that is recording unless I'm badly understand something?