echo of power through my speakers to the audio system

Similar Questions

• Portege M700 - Causing Dynadock of interference near the audio system

  Someone at - he encountered this before?

  I use a M700 connected to a second screen/keyboard/mouse via the Dynadock.

  As soon as I plug the USB cable between the computer and the Dynadock, strong style RF interference are audible through the audio system that I use for music production.

  The actual output of the Dynadock is not affected - it's just the audio system nearby. Yhis happens or not the dynadock audio output is connected to the system.

  This is what makes the dynadock unusable for me - any help gratefully received.

  Ed

  Your laptop or dynadock audio output is not connected to your audio system, right?

  When you turn on dynadock, without connection to the laptop, are the intereferences already there?
  I know that this phenomenon only normal audio cables and devices that have a bad AC or ground connection is not good.

  Maybe you could try to put the dynadock into a different outlet AC, not to intertwined with another device.

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• How to play a sound through computer speakers when the HDMI cable is used as I can't get the audio content

  I have a desktop monitor and an Alienware Alpha I bought recently, which of course is not a speaker. I use a HDMI cable to get the video of the Alpha on the screen, but when I plug the HDMI on my monitor I can not any audio to the fate of the computer speakers. In the Alpha settings, when I try to switch the audio in HDMI mode, it is said that the HDMI is not connected or incorrectly connected. Any help is appreciated. Thank you.

  I'm not quite familiar with the Alpha console, so I can only suggest to visit their support page where you can chat with an expert.

  I hope that you can solve your problem.

• Active due to Communication failure to the Audio System of the TV speakers

  Hi, I own a Sony LED W804a and also home theater BDV E880. I connected two receivers, my Apple TV and home theater HDMI ports to TV... Everything worked fine, but all of a sudden my TV screen started showing the following message 'Active due to the failure of Communication of the TV speakers Audio System'. After this message, audio is played through the TV speakers. Please note that during startup, television displays the message as 'Active Audio System', but later displays the previous message stated, and the audio comes through the TV speakers. Please help how to solve this problem. I made sure that the settings are made so that the audio output, I chose Audio System NOT the TV speakers. Also when I try to Bravia Sync between these two devices, the TV seems that certain signals to detect devices connected, but then it says no devices listed. TV and home theater, I kept on the Bravia sync options.
  Help, please...

  Could be as simple as a bad cable... what type of audio system?

• How to activate the audio system

  original title: SYSTEM AUDIO OFF

  By mistake, I disable the audio device / speakers.  It's not ringing now. What should I do? help please... Thank you!

  Hello

  How to disabled the audio device?

  Run the troubleshooter and check.

  Open the troubleshooting of Audio playback

  Hope this information helps.

• Headphone listening or connection of the Audio System to the Satellite A100

  Is it possible to connect to the connector of the helmet on the front of my A100-233, a powerful external audio system?

  Hello

  Of course, you can use the headphone jack to connect a HIFI System for example.
  Use the headphone jack on my laptop to connect the powerful audio system.
  To do this you need a cable with 2 connectors RCA on one end and a connector on the second end of the cable.

  You can find these cables in each store audio and computer.

• Unable to connect to the audio system with USB

  When I try to connect to my home stereo, it says that the drive is empty or not recognized. (Empty in Auto detection and MSC and MTP device)  He charges with the icon of the Mp3 player and the computer on the Sandisk card.

  I can play with the Jack as analog to my home stereo and car stereo, but the volume is very low.

  I have the latest firmware...

  Any other suggestions on how to connect with usb?

  Thank you

  With USB its basically just using your player as a USB thumb drive. Given that USB keys only a disc and use MSC, you must be in MSC mode and eventually remove all microsd cards. No matter what music you add in MTP mode cannot be accessed. If the volume is low, more analog, you can be in Europe or have put the region in the European Union, where laws prevent mp3 players to have full volume. You can change the region in the USA and things will work normally.

• backup of the old system changed the type of operating system installation

  After backup all data to your desktop at home and move the backup file on the replacement computer that was running and had been activated, got backup and ran into problems.  The original pc was an OEM system with a valid OEM key and had been activated for years.  The new system is a renewed system which has an apparently valid cd and COA 'For refurbished computers' active fine and had been restarted several times after activation before the fiasco of the backup.

  After that I ran the backup recovery, system was restarted as planned, but when the time came to connect to windows, we encountered a problem of activation.  He said that the system should be activated.  I went ahead and put in the key that is attached to the system (the key for PC) refurbished, but he would go through.  I checked that I read the key from the sticker correctly several times and by two other people.  He would not suffer.  Just on a chance that the backup of the old system caused a little problem, I tried the OEM key that was on the original system.  He's been through.

  If the old system should simply be scrapped, I don't think anything, but it will be either made to disadvantaged youth, so I want to make sure that everything is always good about it and it is all above board.  In its current form of the key is now on two different systems.  What can I do to fix this?

  Hello

  I suggest you to download the tool to update product key on your system and then update the product key and check. Follow the steps mentioned in the article below.

  Update your Windows product key

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key?displaylang=en

  If this does not help, then I suggest you to activate by phone and check.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to pass the audio to headset mode. Seems to only allow the speakerphone mode.

  In windows xp, I could choose headphones or speakers in the audio settings.

  This has greatly improved the sound when listening with headphones. It makes the sound more "centered" If you wear headphones.

  In windows 7, the only option that that I seem to have is 'speakers '.

  Anyone know how to recover the headset mode?

  Hi K1DBLITZ,

  To set up Headphone virtualization

  1. Open Audio devices and sound themes by clicking Start , clicking on Control Panel, hardware and sound , and then clicking sound.

  2. click on the tab improvements and then click Headphone Virtualization.

  For more information, see the article mentioned below. This article is for windows vista, but also applies to Windows 7.

  Get high definition sound and music from your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The sound system preference and Callnote

  I installed Callnote to record Skype sessions, but I found that it was interfering with the audio system so I uninstalled using AppCleaner. However, I have always had a rest of Callnote in the input and output peripheral windows from the Sound System Preferences: How can I get rid of him?

  Also (in the spirit of BOGOF - buy one get one free), it's annoying that my startup to open Safari, it starts but does not show a window - I always click on the Safari icon in the Dock. This started to happen with Yosemite, I think; until a window appears automatically. I presume that it does not show because "Hide Safari" is an inalterable permanent choice in the Safari drop-down menu, but why is this so when no other application has this selected permanently?

  Don't know about the first part, but for Safari, try going to system preferences/general and uncheck the narrow windows when you exit an application.

• How to replace the audio driver by default and applet on Windows Vista Home Premium Dell Inspiron 1545 laptop computer?

  I had sound problems and got a pop up saying audio applet did not work, I chkd the sound test in Control Panel and drivers in Device Manager it says all drivers have been updated and had a MS Mr. Fixit scan and everything said it was OK. Also I went to chat with and MS engineer who just told me to do the things that I had already done so who did not help either.  Then, I lost all sound and when I went and chkd Manager of devices, he said that the sound driver was not installed, I went to Dell to have a driver update installed thinking to recognize the missing driver and install it but that didn't work. I can't find something at Dell who tells me how to install the drivers by default/applets. I got chk Dell for updates of pilot and analysis says that it does not work on something more old then XP but my OS is a Vista Home Premium so I don't understand that, I ran an another Mr. Fixit scan but it showed no problems. I suspect it is the applet which has stopped working and it gives a wrong signal that it is the driver that does not work when it is the applet which poses problem. Is there a scan which analyzes all aspects of the audio system and will repair or replace or at least give me a list of things that need to be replaced or updated? Any help would be appreciated I tried to solve this problem for the past two months and I really want to fix this now if possible.

  Hello

  Create a new user account and check if the problem persists, if the problem does not persist in the new user account, then you can fix the damaged user account.

  Create a user account (Windows Vista)

  Screw a damaged profile (Windows Vista)

  Good day!

• Sound of the big bang came through my speakers this AM I clicked on Firefox? Why?

  I run my modem wireless computer 24/7. When I clicked on Firefox this AM the sound of a large explosion came through my speakers. Why? I've been hacked? can you check my computer with file sharing?

  You may eventually receive some comments through your speakers (static or something else). We cannot check your computer, but I'd say you have some sort of back in your speakers, the pirates do not your speakers go boom.

• How to play audio through the headphones and computer speakers, at the same time.

  Hey I just need to know how to play sounds through the headphones and speakers. Help

  Depends on your audio device.

  If its edge, while normally when you plug the headset switch will cut off the speakers.

  If you have a USB or Firewire pro device you can listen to your headphones as the signal played through your speakers.

  See you soon,.
  Jerry

• System only through headphones - no music sounds. BUT... the music only through USB speakers. No system sounds. What is happening with this?

  I listened to the music on my computer through headphones regular plugged into the audio jack of 3.5 mm.  I could hear the computer through headphones - music, movies, YouTube, system sounds - everything.

  Then, I plugged my Microsoft Digital Sound System 80 speakers via the USB interface.  Windows XP found the speakers, loaded the right driver, gave me the message "your device is ready to use" and things started to play music that was running on the computer.  Sounds incredible.

  But now, I have a weird problem.  I can hear only the sounds system through headphones (beeps and dings that play during system events), but I can't hear the sound system on the USB speakers. AND... I can't hear the music/videos/YouTube, etc. on the speakers USB-interface, but I can't hear the sound system through the USB speakers.

  When I go to the audio tab of the sounds applet in the control panel and change the device for audio playback by default "SoundMAX HD Audio" to "Microsoft Digital Sound System", then I hear everything - system and all - sounds on USB speakers.  But then I hear anything through the headphones.

  I want to be able to Exchange music back to making the USB speakers.  How this is done?

  Yes, they are older speakers.  But they work a lot.  And the digital sound via the USB interface is excellent.

  Hi BitSpanker,

  The only option is to change the audio device by default for the device that you want to hear the audio.

  (a) click Start, click Control Panel, and then click sounds, speech, and Audio devices.

  (b) click on sounds and Audio devices, and then click the Audio tab.

  (c) in the sound playback section, under default device, make sure the audio device is the correct default audio device.

  (d) If this isn't the correct default audio device, click the drop-down list next to the device name, click the audio device you want, and then click OK.

  Change the audio device may require that restart you your computer.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows