ECLB with IPS-4270

Similar Questions

• Configuration monitoring IPS 4270 problem

  Hi all

  I installed the new IPS 4270 in our data center. He works with default signature setup.

  Now, I want to control all the traffic coming in and by IPS. Can someone then such me in the name of the tool and how to configure it, by which I can monitor the traffic/attacks as well.

  Note:-I'm not able to monitor the entry and exit traffic/attacks using cisco IDM 6.1.

  Please help in this regard

  Reg

  Juti

  If you have only a handful of the sensors then you should use IME to manage your snesors and watch the traffic of the event. It's free.

  http://www.Cisco.com/en/us/partner/docs/security/IPS/7.0/Configuration/Guide/IME/ime_getting_started.html

  -Bob

• ASA5520 with IPS question

  Hi all

  I'm new in the world of the ASA/IPS, and I have a few questions.

  We buy two ASA5520 with IPS Modules(aip-ssm-10) to a new location, I intend to run in active / standby. This will be my first ASA5520 series.

  My design of network for this site is simple:

  WAN--> 2950 / 24--> 2 x ASA5520 with IPS--> 6513 with SUP2/MFSC-5 x 48-Port 10/100 blades, 1 10/100/1000

  Here are my questions:

  (1) do I need a subscription to Cisco IPS modules? IM being taken is an annual cost to have updates. is it necessary? they will work with it?

  (2) if so, do I need one subscription for each module? even if they are in redundant mode?

  (3) will be an ASA5520 with the support of AIP-SSM-10 200 users?

  (4) do I need a special permit to me to make the VPN? I intend only to have Site to SIte vpn for the moment with perhaps 20 Yes IPhone user VPN, I intend to spend all my VPN user on my next series of ASA (100 VPN users or more).

  any help would be appreciated.

  Kind regards

  Brad

  Brad-

  1 you have a (renewed annually) licence in order to apply the updates to the signature. If you do not have a license, you can still apply the software updates (less frequently) that also contain signature was last updated. The sensor will work correctly without a license. This ism; t as good a agreement that it seems because in software releases there are new engines with the first generation of several new signings. These are generally very noisy and subject to refinement in the subsequent updates of signature.

  2. Yes, you will need a license for each sensor/module.

  3. it depends on how much and what kind of traffic they generate.

  4. no special permits are required for virtual private networks.

  -Bob

• use of 100% of Cisco ips 4270 cpu...

  Hi people I have cisco ips 4270 version 7.0 (2) E3 when I try to access through IDM his show the cpu1 CPU = 100% and 100% = cpu4, but vary cpu1 and cpu2 can you please tell me what will be the solution to this problem...

  When I try to go to the configuration then its give me error... attached document attached please check...

  Hello

  Having 100% on some of your CPU is normal on the platform of the IPS.

  The device uses cycles slowed down it is to prepare for the handling of incoming packets and reduce the delay that it will introduce on their way, then is expected to get even under low load.

  If you want to get a better idea of capacity by % of your IPS you are currently using, you should have a look at the value of the load of the Inspection. Looking at the data that you have provided, you are about 25% at present.

  For the message timeout rdep, it seems to be a software problem. Looking more closely at the image you attached, you can also see "analysis engine status: no answer.

  It is somewhat difficult to troubleshoot those on CSC, so I suggest to prosecute TAC if you want to know the exact origin of cause.

  What I advise is upgraded to the latest code of 7 (0) which is I believe 7.0 E4 (5A), since it is more then likely fixed in this version.

  If you are looking for a quick fix, a reboot of the PPE must erase this but the problem will more then likely return later.

  Kind regards

  Nicolas

• Cluster ASA with IPS

  Hello

  I intend to group 4 ASA firewall between 2 domain controllers.

  I would like to know if the ASA IPS device is also grouped with the ASAs 4 or I have to buy the hardware module ASA IPS?

  In the case where I will need to buy the module hardware IPS ASA it will work as a single module or it could also be clustered?

  Thank you very much for the help.

  Kind regards

  J

  The Documentation States that the IPS is managed individually by unit. So every unit will have it of own IPS and protects the traffic he sees. Without a config-replication available for IPS, you should plan to use a system management as MSC company to ensure that all units have the same configuration.

• IPS-4270-20 power down

  Madam, Sir, friends.

  For unknown reason the IPS Power Down, always at the same time.

  How can I check the temperature of the equipment?

  How can I check the power supply?

  The only thing I've seen different, is the internal system health indicator was red flashing.

  Someone knows how to fix this?

  Concerning

  4270-20 IPS sensor device has a panel integrated diagnostics that you can consult to refine the cause:

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/installation/guide/hw_installing_4270.html#wp40629

• VPN Site-to-Site with IPS Inspection

  Hello friends,

  A simple question:

  Its possible to have IPS inspection (software IPS in the family X, not the SSM module) with the Site to Site VPN environment?

  In other words, can I use firewall with VPN IPS inspection in the same?

  Rafael

  Yes, site to site traffic can be inspected with the IPS module. Only clientless SSL-VPN-traffic cannot be inspected by IPS.

  Sent by Cisco Support technique iPad App

• X 220 models with IPS display

  I have a laptop of LU7-4290.

  Is there an official journal of the portable x 220 specific models that have a display IPS (or 'Premium')?

  IM surfing site sold almost worldwide and all I've found is this description:

  ' i5 - 2520M (2.5 GHz), 4 GB RAM, 320 GB 7200 RPM HD, LCD of 12.5 in 1366 x 768 graphics card Intel HD, Intel 802.11bgn wireless WWAN option, 1 Gb Ethernet, UltraNav, Secure Chip, Bluetooth, fingerprint reader, camera, 6 c Li-ion, Win7 Pro 64 "-no words on IPS or Premium

  and this page: http://support.lenovo.com/en_US/product-and-parts/detail.page?DocID=PD012914.

  I don't understand how can I know if my laptop that IPS displays.

  Please, tell me a link where I can find it.

  Thank you.

  Hi BuGfix, welcome to the forum,

  You can enter your series and model number, (4290), parts search site; This will tell you the number FRU display which has been mounted at the factory.  You could then compare the FRU number with those appearing on the lists of parts, or, after the RUF here number and I am sure that members will be able to tell you which screen.

• X 230 how to identify models with IPS?

  Hello world!

  I'm looking these days for X 230 computers laptops equipped of IPS panels. I just wanted to ask, is it an easy identification (without easy ON laptop) to determine what IPS Panel or otherwise has the laptop? Some special stickers, the particular model, etc.? I want to say how can I ask the seller to check the particular type of its screen before you go and discover the laptop by myself? Thanks for your time...

  Kind regards.

  Ask the seller laptop serial number and check its type of matrix on the Lenovo site: http://support.lenovo.com/en_US/product-and-parts/partsLookup.page

  IPS matrices have p/ns (Lenovo FRU) following:
  MFG p/n 0A 66673 (FRU 04W3462), p/n LG - LP125WH2 (SL) (B1).
  MFG p/n 0A 66702 (FRU 04W3919), p/n LG - LP125WH2 (SL) (B3)

  For your information, it's all kinds of parts of x 230:
  http://download.Lenovo.com/parts/ThinkPad/x230_x230i_fru_bom_20131007.PDF

• Power of Attorney of surveillance with IPS / MARCH

  I want to monitor connections to proxy workaround and to report on them. We have modules of MARCH and IPS in our ASA5520 2.

  You run the risk of false positives, but have you tried IPS GIS 5188 ID (and the subsignitures) or by creating your own custom signature. We use some 4200 s IPS in my constituency and have had a few false positives, but until now it was non-work related Web sites.

• How to check the environment on IPS-4270

  Hi guys:

  I'm looking for a command that I use on a router that is SHOW ENVIRONMENT and it shows me the temperature and voltage of the device, but I'm seeing this information on an IPS, as far as I know and I already check all orders and I can't find something similar.

  I don't know if it's possible or not so please help me guys.

  Concerning

  I know, that these commands are not implemented.

• RAM with SP issue 4270 and KVR133x64sc3l/256

  I have a problem with MS 4270 and KVR133x64sc3l/256.
  Memory is known by the BIOS but Windows 98 does ' t start

  Hello

  Obviously the RAM module is some worries. I found this module compatible info for your unit is:
  64 MB PA3004U
  128 MB PA3005U
  PA3006U 256 MB
  To use this unit must be RAM of PC100 SDRAM SODIMM 144 pin module. Please check on the net if you can find a module with these reference numbers. They must be good because they are tested and recommended by Toshiba.

  Good luck!

• IPS with surveillance mode?

  Hello

  I just new ASA 5555 - X with IPS activate the installation planning.  However, how to set up so the IPS just race as a way of monitoring with so I can more easy to active before tune.

  Because even during execution promiscuous mode active measures to block traffic I want he should through.

  Thank you!

  If the SPI is the fire power module, the guide for installation:
  http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...

  You will need to use "monitor only" to use as an ID instead of the IPS.

  sfr fail-open monitor-only

• ASA with different failover module IPS

  Hi all

  Is it possible to configure the failover of the ASA with different IPS module configuration because we have: ASA 5585-X with firepower PHC-10 and ASA 5585-X with IPS SSP-10

  Thank you

  N °

  Inventories of material (basic unit, memory and optional modules) must be the same in a pair of failover ASA.

• How is used to monitor two ASA (active/stby) with modules IPS Cisco MARCH?

  Hello

  The two ASA with IPS modules are in Active mode / standby. When I try to add both the two IP (active / standby) in MARCH, the MARCH will complain of duplicate names.

  How set up in MARCH to monitor the ASA with IPS with topology standby active?

  Thank you!

  Hello

  The fundamental problem with this scenario is that you have modules able non-basculement in a tipping chassis - think of the pair of failover ASA as a device and modules IPS as two completely separate devices.

  Then, as we have already mentioned, add only the ASA elementary school. (High school will never be passing traffic in standby mode so it is not really necessary in MARCH) Then, with the first IPS module you can add it as a module of ASA or as a standalone device (MARCH doesn't care). With the second module IPS, the only option is to add it as a separate unit anyway.

  In a failover scenario of the SAA swap IP but SPI considering you'll ever messages from ASA active you will get messages from the intellectual property of these two IPS depending on whether you are in the ASA active at the time.

  Remember that you must manually reproduce all IPS configuration whenever you make a change.

  HTH

  Andrew.