RAM with SP issue 4270 and KVR133x64sc3l/256

Similar Questions

• I have a toshiba laptop (4 GB ram) with Win 7 64 bit. Can I format with 32-bit win7 and after that the 32-bit system reads all the 4 GB of ram?

  I have a toshiba laptop (4 GB ram) with win7 64-bit can I format all the 4 GB of ram with 32 bit win7, and after that can read 32 bit system?

  [Moved from comments]

  Original title: decommissioning

  W

  64-bit can but 32 bit can only use concerts of ~ 3.25.  Why would you want to change (which would require a complete reinstallation including all apps) 32-bit?

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• I have a Macbook Pro mid 2012 edition, i7 and 8 GB (2 x 4 GB) of RAM DDR3 (1600 MHz). Can I add any RAM with this config?

  I want to upgrade my RAM 16 GB (2x8GB) and also to change the hard drive (750 GB) to a 250 GB SSD. I was going through the forum and people have posted that they have improved their RAM with no problems. I visited the local electronics market and is the knowledge that they have a Kingston 8 GB DDR3 1600 MHz RAM. I just want to know if it is safe to add that RAM for my MBP or not? One of my friends told me that the MBP requires a different sort of RAM so I am confused. In addition, I was intending to buy a single 8 GB and set up my MBP with 12 GB (8 + 4) RAM and then replace the other 4 GB with an 8 GB to make eventually 16GB. Will there be a problem with this approach? Also can I add any SSD fits laptops from my system? I found an SSD 240 GB (uv300) Kingston. Please suggest if I can add that.

  You can fit a maximum of 16 GB, if you choose compatible Ram.

• 8 GB RAM with ssd and ram 12 GB without ssd cache cache

  We are looking to buy a laptop HP Envy 17 t j100 touchsmart for our son.  Which would be better:

  8 GB of RAM with SSD exceleration 24gig or 12 GB of ram without ssd cache memory?

  The cache of WSSD 24gig offers performance very similar to a full SSD drive for a much lower cost. I would buy the unit with the drive cache of the WSSD 24 concert and as little memory as they sell me and then increase the RAM me but 8 GB of RAM it's frankly more than many. In fact, it's probably better than 12 because there 2 identical modules allowing the functioning of memory dual channel. To summarize, the best option is clearly 8 GB RAm and the WSSD of 24 concert disk cache.

• Having major compatibility issues with Adobe, Mac Yosemite and Wacom Cintiq programs companion hybrid.

  Since I upgraded my Mac iOS Yosemite, my Adobe CS6 programs do not work well at all. They start very well, but the menu windows acting weird, often forcing me by dint leave whenever I try to do something. I downloaded programs CC trials and some may work better for me, but most have similar problems when I try to use on the Wacom. I'll explain my setup, and exactly what is happening...

  I own an iMac end 2012 model (the one without the cd player) and a Wacom Cintiq hybrid companion that I use as a secondary display design. The screen Wacom is under my iMac in the settings screen, since my Wacom rest below the iMac screen. Think Nintendo DS... like how the lower screen is touch screen... same deal here.

  When I open Photoshop CS6, CS6 Illustrator or even Illustrator CC and move them on my Wacom screen, the 'new' window is aligned with the top of the screen, cutting off buttons and options I need. I can't reposition the window because the upper part is necessary to move it. In the case of the window 'opens', it does not at all appear, but it blocks my program. It is as if he wants me to cancel the open window, but the window is not on any screen. That's when I have to force quit. I also noticed that sometimes it seems you have a 3rd office every time I enter the mission control afterwards. I have no idea why this is so.

  The only option that I know to get around these problems is to put my screen on the mirror and mirror of the iMac screen mode, but not only I have to go into settings and recalibrate my pen, whenever I want to use these programs, but it's a major drawback when I fight for space on my screen since I was only 1 working with this mode. And just to be clear that CC Photoshop works perfectly for me. No compatibility issues he Fortunately, but if it works well with my setup, then why don't the others. Worse yet, I don't know who is at fault... What is an Adobe problem, a problem of Yosemite or a problem of Wacom... I do not know.

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

  -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

• Hard drive size and the RAM with Labview 2009

  Hello

  I need to know please, how can I get the HDD of the hole size and the size of free hard drive using LabVIEW.

  Same for the RAM: size of free space and hole size.

  Kind regards

  Take a look at this example (and the thread):

  http://forums.NI.com/T5/LabVIEW/size-of-RAM/m-p/63942#M39616

• Potential SEO issues with the meta description and h1 tag

  Work on the referencing of BC site and noticed the page markup has more than a description meta tag. I think there must be meta tag single description within the section of the page. If someone looked into this? It would seem that the models have the meta description and then tag when a new page is created, if you fill in the description field of SEO for this page, BC adds another meta description tag. What's going on with that and is there a workaround? I'm sure that this negatively affects the SEO.

  Then there is a problem of h1. An h1 tag is an indicator of what the content of the page. Search engines reduce the value of a page that contains multiple h1 tags. If a page Abuse the h1 tags, this page could be determined a junk page and not be indexed. Again, the model contains h1 with the page logo and many of the pages included with the model (Tribeca) reuse h1 in the body. Is there a css solution to substitute the h1 used in logo template? Would anyone like to gift of the snippet of code I could use for this purpose? I'm really bad with css...  Thank you.

  Well Yes and it is one of the Colombia-British ones. That would be a problem with this model. I think that there are a few things wrong with this pass by the forums so I don't know if the BC was made aware of them but I will go to them about this.

  Remove the meta model files from descriptions if you can yourself and that will correct if all goes well. It is not the norm, I have plenty of time to build sites and don't have this problem if it is not not a problem of system so uncomfortable on this.

• BSOD issues before and after a clean windows 7 installed

  Hey, I get BSOD issues after a clean install of windows and I also replaced my RAM with sticks again because I thought that my memory was damaged for some reason any. Is it possible that my hard drive is bad?

  Here's my minidump file:

  https://www.dropbox.com/s/paqnfyylg5yw2bw/012416-20420-01.dmp?DL=0

  Hello

  Since you did a clean install this strongly points to material with only one
  small chance, it is the BIOS, chipset drivers or others. Could be the hard drive, the
  wiring for the hard drive or other hardware.

  BugCheck F4, {3, fffffa800df48060, fffffa800df48340, fffff80002b97f40}

  ETW unavailable minidump
  Probably caused by: ntkrnlmp.exe (nt! PspCatchCriticalBreak + 92)

  Ntkrnlmp.exe is a component of Windows which means than anything else he has led astray.

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  ---------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  ========================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  =========================================================

  BCCode: F4 0x000000F4<-- read="" this="">

  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
  https://msdn.Microsoft.com/en-us/library/ff560372%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  =========================================================

  These can help:

  Remove ALL power. Then carefully remove the cards one time and put them
  back in their locations. Do the same for memory, then the cables. A coward or
  corroded connection point may cause strange problems.

  Reinstall the expansion cards
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-excards.htm

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  The relocation of the supply and internal data cables
  http://pcsupport.about.com/od/fixtheproblem/SS/Reseat-power-cables-data-cables.htm

  Reinstalling your RAM, graphics card and hard drive
  http://www.YouTube.com/watch?v=DLxNPBQBfT8

  ---------------------------------------------------------------------------------------

  You may need to check with the mother system/card manufacturer or a computer
  Shop (that makes its own service in the workshop).

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• The port Thunderbolt can we adapt for USB3 ports. I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Is there an excellen

  I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?

  I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.

  Thanks,-John D.

  What month / year is your Macbook Pro?

  Also is what size?

  i.e. of Macbook Pro (13 "Early 2011)

  If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654

  If your existing computer has USB3 ports, you could get a USB3 hub.

  Kim

• Can I use PC400 RAM with the Tecra A4 (Pentrium 750)

  Can I use PC400 RAM with the Tecra A4 (Pentrium 750), currently PC333 is mounted.

  Thank you

  I put t know if you can use but AFAIK Toshiba recommends using these modules on the Tecra A4:
  PC2700 256 MB (PA3311U - 2M 25)
  PC2700 512 MB (PA3312U - 2M 51)
  1024MO PC2700 (PA3313U-2M1G)

  Here are the modules of single channel 166 MHz DDR333/PC2700, DDR SDRAM, 200-pin SoDIMM.

• 16 GB of RAM with a work for the MacBook Pro mid 2012 13 "i5 location?

  Hey,.

  one of my two RAM slots no longer works. I always wanted to update my 16 GB RAM. I know that my MacBook Pro can have 16 GB of RAM with 2x8GB - RAM modules. But is it possible to have 16 GB of RAM with a slit (1x16GB) ?

  Call OWC (macsales.com) and Crucial to ask, but the kits which they tested for 16 GB is 2x8GB.

• I use Envy 17 with a job posting and I need to be able to turn it on even if the lid is closed? Thnx

  Hey! Regarding my HP Envy 17 1085 eo. I use my Envy 17 with an external display, and I have to be able to turn on my pc, while the cover is closed (clamshell). It is possible while the pc is in "standby", while activating the mouse keyboard og - but Windows break mode standby after a certain time, leaving me frustrated as I then need to open the lid of my desire and press the button 'walk', to use the Windows. Is it possible somehow? Thank you very much!

  Hey dhalb_,

  Have you ever watched the Power Options window (start > type 'power' > click Power Options) where you can change when the computer sleeps (left)? As long as you stop the computer periodically (2 - 3 times a week, if you use it every day) it would be nice to never go in "standby mode" while it is plugged.

  For a while, I used a laptop as a desktop replacement with an external monitor and ran into the same frustration as yourself. I shut down my computer after each use if so I came up with a scheme where I could leave the screen all half open, just enough to be able to press the power button.

  If you prefer to go in standby mode, you can go to the advanced power settings (Power Options > change Plan settings next to the selected power management > change advanced power settings), extend your sleep and set "Hibernate after" connected to never by typing 'Never' in the field minutes. Click on apply and OK.

  I should mention that it does not extend the life of your computer to run constantly. Hard drive failure and the motherboard issues sees much more often on machines that are constantly running. Computers bogged down and run slowly when the memory is full. Memory erase them and will reset when the computer is turned off. Here's a link explaining more on the accumulation of memory and aging of the material.

  I hope these suggestions help. Please let me know if you have any questions.

• Problem with MSINFO32. EXE and Total/available vs Page file space virtual memory reported

  I am running Windows XP Professional SP3 with all installed updates, latest hardware drivers, etc.. It is a CLEAN installation on a material brand new, completed a week ago.
  The "/ PAE" switch is enabled in the boot.ini file.

  When I run MSINFO32. EXE, the summary of the system is the following:
  System model: System product name
  System type: X 86-based PC
  Processor: x 86 family 16 model 4 Stepping 3 Mhz-AuthenticAMD ~ 3515
  The version of the BIOS/Date: American Megatrends Inc. 1702, 22/12/2010
  SMBIOS Version: 2.5
  Windows directory: C:\WINDOWS
  System directory: C:\WINDOWS\system32
  Starting device: \Device\HarddiskVolume2
  Locale: United States
  Layer of HAL: Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  Username: username MYUSERNAME01\My (redacted for privacy)
  Time zone: Pacific Daylight Time
  Total physical memory: 8 MB 192,00
  Available physical memory: 2.60 GB
  Total virtual memory: 2.00 GB
  Available virtual memory: 1.96 GB
  Page file space: 7.07 GB
  File: E:\pagefile.sys

  Right click on 'my computer' and selecting 'Properties' shows exact needs to be visible to a 32 bit OS... 3.24 GB of RAM. So, how MSINFO32. EXE is able to detect all of 8 GB is totally beyond me. But this isn't my problem.

  My BIG PROBLEM is the virtual memory. If I open the root of my drive E:\, it shows the swap file to size: 4 096 MB. And that's how it is in 'my computer' > 'Advanced' > 'Performance' > 'Advanced' > 'virtual memory' > 'change'.
  Custom size:
  -Initial size (MB): 4096
  -Maximum size (MB): 4096
  Total size of file for all readers:
  -Minimum authorized: 2 MB
  -Recommended: 4978 MB
  -Currently allocated: 4080 MB

  Why is-MSINFO32. EXE, statement my total virtual memory 2 GB and the size of pagefile 7.07 GB? Neither is correct! Can someone explain just what the heck happens here? My research on Google, many other people report the same total/available virtual memory amounts, with wildly different hardware configurations. I changed the size manually and rebooted several times, without result. I had the pagefile, sitting in a 5 GB partition, and then he moved on to another drive with plenty of space and assign "System managed". Divergence still existed.

  The material is as follows:
  [|] ASUS M4A88TD-V EVO/USB3 BIOS v1702 [|] AMD PhenomII x 4 (970 Black Edition) [|] Corsair CMZ8GX3M2A1600C8 (x 2) mode modules together ~ 800 Mhz & calendar 8-8-8-24 [|] Integrated graphics card Radeon HD 4250 with 128 MB + 512 MB memory [|] ASUS VE248H 24 "1080 p HD LED monitor [|] Drives from Maxtor 6V250F0 (x 4) 250 GB SATAII 1.5 Gbps [|] LG BD - DL Optical Drive WH10LS30 [|] Creative Labs X - Fi Platinum Sound Card [|] Logitech LX 700 keyboard/mouse wireless [|]

  I changed the speed / "timing" on the RAM to run ~ 666 Mhz @ 9-9-9-24, and the problem persists. As far as I know, he is not actually detrimental to the system; that is, it does not regularly, crash or anything. But the fact that MSINFO32. EXE cannot obtain such a right basis is VERY disturbing for me. There is no state what operating system says it is, then what fundamental problem may arise at some point in the future? Or is already there, hidden and wait a moment when the system load is high until it rears its ugly head and denounces all?
  I wonder if I should completely eliminate virtual memory? Or at least reduce the pagefile to 2 GB or close? After all, I can't imagine many running programs as long as 3.24 GB (RAM available for the operating system) is not sufficient to contain all this. I guess only he pourrait happen, however, is why I'm reluctant to totally renounce virtual memory.

  Anyway. Responses of all appreciated. Gimme a solutionand I will give my first-born. Or at least the neighbors...

  Hi VesanusTempestatum,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows XP IT Pro category

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.