Eclipse console on screen blackberry Simulator

Similar Questions

• Eclipse fails to package the project every other time I try to run BlackBerry Simulator

  I have a simple project that I've set up using the SDK 7.1 BlackBerry, it has no external dependencies.

  Almost without fail, every other time I hit him "run on BlackBerry Simulator' I get an error similar to the following:

  Packaging project BlackBerryApplication
  C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\rapc.exe -convertpng -quiet codename=deliverables\Standard\7.1.0\BlackBerryApplication -sourceroot=D:\Git\BlackBerry Application\BlackBerryApplication\src;D:\Git\BlackBerry Application\BlackBerryApplication\res;D:\Git\BlackBerry Application\BlackBerryApplication -import=C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\lib\net_rim_api.jar deliverables\Standard\7.1.0\BlackBerryApplication.rapc D:\Git\BlackBerry Application\BlackBerryApplication\bin
  JAR file creation failed with error -1
  The preverified classes if any are in tmp28761. See jar log of errors in C:\Users\t_gibson\AppData\Local\Temp\rapc_71af6d24.dir\jarlog.txt
  Error!: Error: preverifier failed: C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\preverify.exe -d C:\Users\ ...
  Packaging project BlackBerryApplication failed (took 0.584 seconds)
  

  No matter if I clean up project or own Simulator I still get the same error another each compilation. Does anyone have an idea what could cause this? If I type "run on a BlackBerry Simulator" right after the error, it works fine.

  I use the 9900 with Eclipse 3.7.2 and BlackBerry 7.1.0.10 SDK Simulator. The plug-in version is 2.0.0.201207181003.

  Thank you!

  EDIT: I should clarify that when I say that the cleanup project makes no difference, what I mean is that cleaning of the project once the means it compiles OK next time, but unless he is cleaned after the first compilation, again a second time the compilation will fail. If although the project before each compilation of cleaning could cause it to compile every time, this does not solve the problem that it is there always something left in an inconsistent state after a successful compilation.

  I have determined that the source of the problem was a bad setting in the project configuration that I did when I created the project, I added wrong file the project root to the source compilation path option on folders. The error in the line of rapc.exe is highlighted below

  Packaging project BlackBerryApplication
  C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\rapc.exe -convertpng -quiet codename=deliverables\Standard\7.1.0\BlackBerryApplication -sourceroot=D:\Git\BlackBerry Application\BlackBerryApplication\src;D:\Git\BlackBerry Application\BlackBerryApplication\res;D:\Git\BlackBerry Application\BlackBerryApplication -import=C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\lib\net_rim_api.jar deliverables\Standard\7.1.0\BlackBerryApplication.rapc D:\Git\BlackBerry Application\BlackBerryApplication\bin
  JAR file creation failed with error -1
  The preverified classes if any are in tmp28761. See jar log of errors in C:\Users\t_gibson\AppData\Local\Temp\rapc_71af6d24.dir\jarlog.txt
  Error!: Error: preverifier failed: C:\Eclipse\plugins\net.rim.ejde.componentpack7.1.0_7.1.0.10\components\bin\preverify.exe -d C:\Users\ ...
  Packaging project BlackBerryApplication failed (took 0.584 seconds)
  

• Sencha shows white screen on Simulator and device application

  Hello

  I developed a sencha sample application using Sencha Architect (2.2.0) and able to see the screen on the emulator to ripple. After generation successful application using emulator waving, when I try to install the application on the device and blackberry simulator (9900,9860) is showing the white screen.

  I applied the changes for window given in link below:

  http://www.Sencha.com/Forum/showthread.php?252232-guide-deploying-Sencha-touch-2.1-as-a-BlackBerry-n...

  Always on display white screen.

  Help, please.

  I removed the circumvention of the viewport from app.js and it works fine now.

• An internal error occurred during: "Packaging Blackberry Simulator."

  Hello

  When I run a simulator in the Blackberry Plugin for Eclipse, I get the following error:

  'Packaging Blackberry Simulator' has encountered a problem.

  An internal error occurred during: "Packaging Blackberry Simulator."

  When I click on the 'Détails' button, I get the following error message:

  An internal error occurred during: "packaging BlackBerry Simulator.
  java.lang.NullPointerException

  My software installed on Windows 7 are:
  Blackbery Java Plug-inc (core) 1.5.0.201112201607
  BlackBerry Java SDK 7.0.0.33
  Eclipse SDK 3.6.2.M20110210 - 1200

  In the Package Explorer, I use:
  "[BlackBerry JRE 5.0.0] JRE System Library

  In the preferences for the parameters of compiler, I put the
  The compiler compliance level for: 1.3

  In Run Configurations, I got the JRE the value:
  BlackBerry JRE 5.0.0

  My windows path is:

  C:\oracle\product\11.2.0\Client_1\bin;%SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\WindowsPowerShell\v1.0\; C:\Program Files (x 86) \Common Files\Ulead Systems\MPEG; C:\Program Files (x 86) \QuickTime\QTSystem\; C:\Program Files\Intel\WiFi\bin\; C:\Program Files\Fichiers Files\Intel\WirelessCommon\. C:\Program Files\TortoiseSVN\bin; C:\Program Files\Java\jdk1.6.0_25\bin

  My CLASSPATH Windows is:

  .; C:\Program Files (x86)\QuickTime\QTSystem\QTJava.zip

  Thank you

  Steve

  Simon,

  Thank you for responding, I managed to get rid of the error by changing the level of compliance of the compiler... I didn't know there are two ways to define the path to build for a project (in the projects pane when you right click on the project) and the other for a global setting in the preferences window.

  I guess it's very obvious that I am still a beginner when it comes to Eclipse... lol

  Thanks again,

  Steve

• How to debug a moped in the BlackBerry Simulator

  How can I debug my normal midlet application in BlackBerry's Eclipse Simulator? Is it still possible? I use Eclipse Pulsar and I installed BlackBerry JDE and BlackBerry Plugin for Eclipse.

  It is certainly possible to debug a MIDlet on the BlackBerry Simulator. But there's a catch. To debug a MIDlet here, you need the debug files. BlackBerry JDE or plugin Eclipse means that you would need your MIDlet as project BlackBerry first. You cannot debug just a JAD and JAR.

  Is your MIDlet project of BlackBerry? If this isn't the case, it will be very easy to make a BlackBerry project, throw your files it contains, select the MIDlet main class and debug away.

• Eclipse debugging for torch/OS6 Simulator

  I downloaded the Simulator OS6 and I can't seem to get the debugger to work. It appears as an option in Eclipse, but when I run the debug it does not load my application with the Simulator... Anyone know what I'm doing wrong?

  I'd really rather not explain how I did this job, but I will...

  I assumed that the download of the Simulator on the BB site package included the JRE6.0.0; of course, I was wrong! Once I followed the instructions (ahem... RTFM) I was able to update Eclipse, get the JRE 6.0.0 and everything works again...

  The eclipse instructions: http://us.blackberry.com/developers/javaappdev/javaupdate.jsp

  Thanks for your help... now let's act like it never happened...

• BlackBerry Simulator on windows 7 x 64

  Does anyone know why the blackberry Simulator are not on a PC under Windows 7 64-bit?

  It is very annoying.

  Thank you very much.

  Unfortunately not, but you can stop it by killing the fledge.exe process in the Task Manager.

  May be worth looking at the plugin Eclipse newly released as the press release States 'ability to load instantly and immediately run a request modified during debugging without having to reset the Simulator or device' that can make this less of a problem.

• [request] BlackBerry Simulator 10.3

  Hello

  I try BB 10.3 Simulator running. I put the vmdk to Oracle VM Virtual Box Manager. When I press "4" to load the BlackBerry 1440 x 1440, it displays error message "cannot locate the PNP Bios. How do I fix this error?

  Thank you.

  Virtual Box is not supported by 10 of BlackBerry Simulator.  VMWare Player or VMWare Workstation are required.

• How to install the KEY file in the Blackberry Simulator?

  Hi all

  I developed the Web application using BlackBerry Webworks SDK and emulator Ripple... In that I created the package for Blackberry 6 and previously using emulator Ripple... Now, I have the COD files. Then I downloaded the Blackberry Torch Simulator... So please give the procedure to install COD files on the Blackberry Simulator... Thanks in advance...

  With respect,

  Marimuthu_P,

  Hello

  The Simulator must have a 'File' menu where you can load applications. It works for you?
  http://developer.BlackBerry.com/BBOS/HTML5/documentation/running_your_app_on_a_simulator.html

• Debugging is not supported on the selected Blackberry Simulator

  I just installed the plug-in for Visual Studio. Installed simulators are Torch 9800 (v6.0.0.534), the Torch 9800 (v6.0.0.313), 9930 (v7.0.0.318), they all give me the same message. I have a simple HTML web page, set to debug, when you click on play, I get the message, "debugging is not supported on the selected Blackberry Simulator. Only the loading and the launch of WebWorks Applications currently available. Please select a different Simulator if you need.

  Any ideas?

  Adam

  I think that the debugger works with the simulators that have v5.0.x BONES.  All those you listed are 6.0 or more.

  Try a simulator to v5.0x.

  The visual studio plugin is removed in October I think.  The new test environment is the emulator of the ripple.

  http://ripple.tinyhippos.com/

• How can we enable the html mode of the e-mail to the 9800 blackberry Simulator

  How can we enable the html mode of the e-mail to the 9800 blackberry Simulator?

  When I sent messages html Simulator, it only shows text.

  the Simulator does not support html emails

• Unable to send an email with the BlackBerry Simulator

  I am trying to set up the BlackBerry Simulator so it can send and receive e-mails from my e-mail server (hosted). While I followed the recommendations in the various articles on how to use the ESS or configure MDS, I can't always send electronic messages of the Simulator.

  E-mail messages are retrieved successfully by the Simulator, however.

  I tried to use both the ESS as well as the various email configuration options under [Email] in the config rimpublic.property MDS file. Both produce the same error message (pasted below).

  I checked several times that the settings for SMTP and POP are properly typed. Interestingly, the following stack trace indicates failure of the SMTP connection on port 25, but this isn't the port number that I entered.

  I wonder if the simulation of e-mail is unable to work with ports other than 25 SMTP?

  I mainly use the ESS and MDS came it with the JDE 4.3 and 4.3 OS simulator 8330, although the 4.6 OS 9000 Simulator produces the same result.

  Any help on this would be much appreciated.

  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  Exception, javax.mail.MessagingException: could not connect to SMTP host: smtpo
  UT. Secureserver.NET, port: 25;
  LAYER = CMIME, EVENT = Exception, nested exception is:
  LAYER = CMIME, EVENT except java.net.ConnectException: ti connect
  Med out: connect
  LAYER = CMIME, EVENT = Exception, at com.sun.mail.smtp.SMTPTransport.openS
  erver(SMTPTransport.Java:1227)
  LAYER = CMIME, EVENT = Exception, at com.sun.mail.smtp.SMTPTransport.proto
  colConnect(SMTPTransport.java:322)
  LAYER = CMIME, EVENT = Exception, at javax.mail.Service.connect (Service.ja
  will: 236)
  LAYER = CMIME, EVENT = Exception, at javax.mail.Service.connect (Service.ja
  will: 137)
  LAYER = CMIME, EVENT = Exception, at javax.mail.Service.connect (Service.ja
  will: 86)
  LAYER = CMIME, EVENT = Exception, at javax.mail.Transport.send0 (Transport.
  Java: 150)
  LAYER = CMIME, EVENT = Exception, at javax.mail.Transport.send (Transport.j
  AVA: 80).
  LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.bx.dJ.a (mailbox
  Watcher.Java:106)
  LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.bt.xr.b (CmimePa
  RSSR. Java:385)
  LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.bt.xr.a (CmimePa
  RSSR. Java:48)
  LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.xC.g (CmimeLayer
  Packet.Java:68)
  LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.ac.hE.a (CmimeLa
  yerReceivingQueueManager.java:65)
  LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.N.ab.run (listening
  ForClientsPackets.java:82)
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::<>
  exception: could not connect to SMTP host: smtpout.secureserver.net, port: 25;
  nested exception is:
  java.net.ConnectException: Connection timed out: connect >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  MTPTransport.openServer (SMTPTransport.java:1227) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  MTPTransport.protocolConnect (SMTPTransport.java:322) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  Connect (Service.java:236) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  Connect (Service.java:137) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  Connect (Service.java:86) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  t.send0 (transport. Java:150) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  t.Send (transport. Java:80) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  ar.bx.dJ.a(MailboxWatcher.java:106) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  AR. BT. XR.b (CmimeParser.Java:385) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  AR. BT. XR.a (CmimeParser.Java:48) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  ar.xC.g(CmimeLayerPacket.java:68) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  ar.ac.hE.a(CmimeLayerReceivingQueueManager.java:65) >
  <2009-09-26 13:45:47.546="" pdt="">:[352]:::
  AR. N.ab.Run (ListenForClientsPackets.java:82) >

  Unfortunately, I wasn't able to find a solution to this. It seems that port 25 is hardcoded in the SSE code and any value is entered in the form, it is port 25 is used.

  My guess is that probably the only way out it is either:

  (a) find an email provider that uses port 25. Unfortunately gmail and none of the other e-mail providers I use actually use port 25, or

  (b) to set up your own mail server that uses port 25.

• BlackBerry Smartphones test web application through BlackBerry Simulator.

  Hello

  I have to test my web application on a blackberry Simulator. My first question is: if it is possible to test any web application using the Simulator or I can test only the rich applcations of BlackBerry?

  I do the following:

  1. I downloaded Black Berry Email and MDS services Simulator 4.1.2 and BlackBerry_Simulators_4.7.0.78_9500 - Vodafone.exe.

  2A started the MDS Simulator first, then the BB Simulator.

  But I am not able to connect to internet, BB Simulator. Am I missing a config in the MDS Simulator.

  Help, please. This is urgent. TIA.

  Hello

  Open the rimpublic.property file. The rimpublic.property file is located in the following locations: \Program Files\Research In Motion\BlackBerry Email and Simulators\MDS\config of MDS
  

  Then add these commands in the section [MANAGER HTTP], update the following:

  application.handler.http.proxyEnabled = true

  application.handler.http.proxyHost = hostname

  application.handler.http.proxyPort = hostport
  application.handler.http.proxyUser = username

  application.handler.http.proxyPass = password

  application.handler.http.proxyAutoConfig = true

  application.handler.http.proxyAutoConfigURL = http://URL_to_Your_Config_File

  application.handler.http.proxyAutoConfig.ScriptCacheTime = 0

  Save these changes and to make with your steps... that will succeed to open a web application on your Simulator... more can know which web application (i.e. URL) that you want to test... I had the same problem, but somehow managed to open sites to Simulator after adding these commands. But my main concern is to open a URL in sector public siebel that is installed on a server in 9530 Simulator device. Can you/only you know which deals with the implementation of CRM siebel on simulators could you please suggest me doing this task.

  Thanks in advance

  Hochart

  India

• Mail server Simulator works only not with the blackberry Simulator

  Hello

  I'm trying to connect the ESS for the BB Simulator (addin eclipse) so I could simulate interaction email.

  Accroding to the documentation, I need start the BB and the ESS simuilator and select stand-alone mode. But as soon as I click on the launch button ESS crashes...

  When I confugre the Server POP3 details and choose "connected mode", it seems that the ESS connects to the server I see the emails in the account in the java console, but I can't send or receive e-mails on the blackberry.

  Can someone please advise?

  Thank you

  Amir.

  See this article.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/800982/support...

• Blackberry Simulator user agent is not Unique?

  I'm having a lot of trouble to customize the style sheets for Blackberry devices because I do not have before me, physically.

  When I run the Simulator BlackberryOS (using VMWare Fusion in OSX 10.9 emulation) and run a detective to a WebKit browser, I get this as the useragent:

  navigator.userAgent"Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.35 (KHTML, like Gecko) Chrome/26.0.1410.64 Safari/537.35"
  

  That does not seem that this would be the same string that a physical Blackberry smart phone would be out... right? Below (Javascript) code that I use for devices Blackberry target.

           var ua = navigator.userAgent;
             if (ua.match(/(BlackBerry|Blackberry|blackberry|BB|bb|RIM|rim|Playbook|PlayBook|playbook)/)!=null) {
                  document.write('');
                  console.log ('Blackberry confirmed');
              }
  

  He looks at something weird happens and the userAgent comes from somewhere else. I don't know how.

  The userAgent should be

  "Mozilla/5.0 (BB10; Touch) AppleWebKit/537.35+ (KHTML, like Gecko) Version/10.3.0.440 Mobile Safari/537.35+"
  

  which I pulled the Simulator 10.3 beta.

  If you need to match on the userAgent, add "BB10" to your list. I understand that you are probably working on software that cannot be changed easily, but if possible, I would recommend moving detection feature and no browser detection. This is one of the reasons why the userAgent changed with BB10 - it's because too many sites could detect a BlackBerry and offering users an experience tailored for phones from 7 years or more, when perceive it BB10 browser is unmatched for its performance and features HTML5.