Unable to send an email with the BlackBerry Simulator
I am trying to set up the BlackBerry Simulator so it can send and receive e-mails from my e-mail server (hosted). While I followed the recommendations in the various articles on how to use the ESS or configure MDS, I can't always send electronic messages of the Simulator.
E-mail messages are retrieved successfully by the Simulator, however.
I tried to use both the ESS as well as the various email configuration options under [Email] in the config rimpublic.property MDS file. Both produce the same error message (pasted below).
I checked several times that the settings for SMTP and POP are properly typed. Interestingly, the following stack trace indicates failure of the SMTP connection on port 25, but this isn't the port number that I entered.
I wonder if the simulation of e-mail is unable to work with ports other than 25 SMTP?
I mainly use the ESS and MDS came it with the JDE 4.3 and 4.3 OS simulator 8330, although the 4.6 OS 9000 Simulator produces the same result.
Any help on this would be much appreciated.
<2009-09-26 13:45:47.546="" pdt="">:[352]:
Unfortunately, I wasn't able to find a solution to this. It seems that port 25 is hardcoded in the SSE code and any value is entered in the form, it is port 25 is used. My guess is that probably the only way out it is either: (a) find an email provider that uses port 25. Unfortunately gmail and none of the other e-mail providers I use actually use port 25, or (b) to set up your own mail server that uses port 25. Tags: BlackBerry Developers How to send an email with the link that has the user id? Hello everyone, I'm trying to send an email with the link that includes the user id. After users click the link, they should be able to see the form with their information that has been previously fulfilled. So my question is after I have send email how and what is the best way to get information and show it to the user. What should be separate page with the cfquery limited on the id user or something else? If anyone has an idea of what is the best way to do it please let me know. I already have my code who send e-mails. You save all the fields submitted initially to a database? If so, run a query and then convert them to the form field, query values. I don't know what looks like your data (or database), but a simplified version might look like this.
OF SavedFormTable WHERE ID =
A really strange problem! I use different e-mail accounts. I send an email with a sender (defined as standard!), email is archived in archive A sent from the sender, the sender is wrote in the header of the email as the sender, but the email is sent with the sender B written as the sender in the email received. Best regards, Michael It sounds like you do not use the right smtp server to send the e-mail. Please check what 'Sender A' smtp server account uses. If you are unsure about what to do please post the following information: In Thunderbird Tell me the number of the account which is "sender." Please help send an email with the html page in the body I need an html page on the body of an email to send a blast to send to our customers. HTML emails can be a bit complicated. You can design in Dreamweaver, but you shouldn't really have to send emails of mass through to your personal e-mail account (or your company account). Could you put blacklisted by spam filters in the company and make your pretty useless email addresses. Mass emailings (more than a few hundred addresses) I use http://www.icontact.com. You can build the email through their site (without DW) or you can import your DW html file to their service. Some things to keep in mind with the HTML email... 1. the use of absolute links to the images and files on a server you control 2. use a limited amount of inline css (no external css or integrated) 3. specify in table based layouts, css support is spotty at best with email clients 4. the
5. do not use an email only to images. HTML text is very important to keep from being labeled as spam, make the secondary images in the message, many email clients will not download images without permission of the user 6. include a link to unsubscribe so people can get off your list There are more things to watch, but who are the biggest. Here are some other good info: http://alt-web.com/Articles/HTML-Emails.shtml Mail server Simulator works only not with the blackberry Simulator Hello I'm trying to connect the ESS for the BB Simulator (addin eclipse) so I could simulate interaction email. Accroding to the documentation, I need start the BB and the ESS simuilator and select stand-alone mode. But as soon as I click on the launch button ESS crashes... When I confugre the Server POP3 details and choose "connected mode", it seems that the ESS connects to the server I see the emails in the account in the java console, but I can't send or receive e-mails on the blackberry. Can someone please advise? Thank you Amir. See this article. Original title: outlook. The host 'smtp' could not be found. Please check that you have entered the server name correctly. How to send an email using the BlackBerry API. Hi all as topic, do you know if BlackBerry offers some API to send email? Will there be some indications on how to use this API? Have you actually looked for more information on making yourself? I suggest that you do and you can do before posting questions in general. I look at the developer's guide, search in this forum and the KB. I think that you will find information that will help you to do what you want in all three places. Send an email with the password I took a long break of it and when I came back, I changed my sendusing towards = 2. The reason why I do not think that it worked was because I sent myself a test email and it was taken in the 40s and I do not see it in my Inbox. Unable to send an email with picture 36. because they say its 50 photo I use hotmail trying to convey a msg that has 36 pic, but it says that it cannot be sent because the limit is 50. I need to delete some before it can go. Why they say 50 when his 36? That is controlled by Hotmail, not Firefox. Contact Hotmail on your problem. Firefox is a web browser, not a messaging application. With Firefox, you can access your mail via web mail sites, such as Hotmail. Firefox simply load and displays the Hotmail page, like any other web page and your account information and email when logged in to Hotmail. Problems with your e-mail address should therefore be directed to Hotmail. If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum. Not related to your question, but... You must update some plug-ins: Send an email with the access to the content a row How can I send the email link to the user to access a specific document in IR report page? I send send plugin and send his job very well, but the body of the email. It comes to the test by automated DMS system message. " < a href =" http:// localhost:7777 / pls/apex/f? p= & APP_ID.:17: & SESSION. : & DEBUG. : "> please click < /a >" By,. DMS development team When I open email link his request user name and password to the normal user login page? but I need this user can access the particular record not only the rest of the row. Change to what I think you're asking for. If you would like to use ID instead of ROWID Create a simple form that sends an email with the data I am creating a form of simple command for our Web site that allows people to fill out their name and address and have these data by e-mail to me. I'm familiar with Dreamweaver, but have never looked into this kind of thing before. I've read several tutorials on the use of PHP script to do this and he's going to 'confirmed' url after clicking on send, but I never have the e-mail. Our site is hosted on GoDaddy. Could someone guide me through this process, or at least point me in the right direction? Thank you. Here is a link to a video tutorial that can help. http://www.Tutvid.com/tutorials/Dreamweaver/tutorials/phpFormHandler.php TB change the sender name to my name to email classic. In the toolbar > Options > view > advanced and turn off "see the show only the names of the people in my address book." If I try to send an email with an attachment or a picture inserted, it starts to send with a progress bar that will read a 80 to 95% completion and then stay there until it times out after a few minutes. I get this error: failed to send the message. Thank you Robert OK, I thought about it. As I was going through the configuration editor, I saw the outgoing server settings. It made me wonder if something had changed. I went to my provider and reinforced through their list and found where mine differ. If the update for thunderbird changed something or verizon changed something. I have my own areas and when I email companies and organizations I always give them a single as e-mail address: [email protected]. This helps cut down on SPAM and identifies when organizations are hacked so I can 'kill' individual addresses with my domain registration. I currently do this by using a temporary NOSPAM Thunderbird "generic" account "from" address (which I need to change from time to time and 'kill' with my domain registration to prevent SPAM) and I change the 'reply-to' address when I send an email to such an organization. What tends to work OK most of the time, but often the 'reply-to' address is lost at the other end, perhaps when the emails are forwarded internally. This can leave some temporary old sent emails "from" addresses never happen to me. Much cleaner would be to send these emails with identical (and unique) 'from' and 'reply-to' fields. Someone has ideas how to achieve this goal, but obviously without creating an individual account each time? If Thunderbird helped change the address 'from', in special circumstances, it might be a solution. Have you considered adding several identities to the main account? In addition, there are modules allowing to select the correct identity to send messages: https://addons.Mozilla.org/en-us/Thunderbird/addon/identity-Chooser/ https://addons.Mozilla.org/en-us/Thunderbird/addon/correct-identity/ and another which might be of interest: https://www.absorb.it/virtual-id Help send emails Your provider of messaging service for this information. All my mail folders are no longer visible. How can I get back them? I went and turned on my Macbook pro this morning and opened the e-mail. All my mailboxes and folders disappeared. I have re-setup of my two pop box but I can't import my old records. I found in the user/Library/Mail directory but do not know how t How to remove permanently print "summary statistics"? Streets and trips 2013. Whenever I want to print a new card, I need to go to "other options" and uncheck "include the summary statistics. How can I permanently remove this option. Summary statistics are not necessary. Please tell me how to move contacts from Hotmail and MSN for an ipad lists Problems with printing from PC main computor of back of the store, they had to reinstall everything. use with the router and laptop computers of wifii (line direct print) cannot print tried reinstalling the printer does not detect printer. The winsxs folder takes up half of my hard drive. How can I make it smaller? original title: winsxs The winsxs folder takes up half of my hard drive. How can I make it smaller? Help, please... I am running Windows Vista Home Premium Service Pack 2
Exception, javax.mail.MessagingException: could not connect to SMTP host: smtpo
UT. Secureserver.NET, port: 25;
LAYER = CMIME, EVENT = Exception, nested exception is:
LAYER = CMIME, EVENT except java.net.ConnectException: ti connect
Med out: connect
LAYER = CMIME, EVENT = Exception, at com.sun.mail.smtp.SMTPTransport.openS
erver(SMTPTransport.Java:1227)
LAYER = CMIME, EVENT = Exception, at com.sun.mail.smtp.SMTPTransport.proto
colConnect(SMTPTransport.java:322)
LAYER = CMIME, EVENT = Exception, at javax.mail.Service.connect (Service.ja
will: 236)
LAYER = CMIME, EVENT = Exception, at javax.mail.Service.connect (Service.ja
will: 137)
LAYER = CMIME, EVENT = Exception, at javax.mail.Service.connect (Service.ja
will: 86)
LAYER = CMIME, EVENT = Exception, at javax.mail.Transport.send0 (Transport.
Java: 150)
LAYER = CMIME, EVENT = Exception, at javax.mail.Transport.send (Transport.j
AVA: 80).
LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.bx.dJ.a (mailbox
Watcher.Java:106)
LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.bt.xr.b (CmimePa
RSSR. Java:385)
LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.bt.xr.a (CmimePa
RSSR. Java:48)
LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.xC.g (CmimeLayer
Packet.Java:68)
LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.ac.hE.a (CmimeLa
yerReceivingQueueManager.java:65)
LAYER = CMIME, EVENT = Exception, at net.rim.ippp.a.b.g.ar.N.ab.run (listening
ForClientsPackets.java:82)
<2009-09-26 13:45:47.546="" pdt="">:[352]:
exception: could not connect to SMTP host: smtpout.secureserver.net, port: 25;
nested exception is:
java.net.ConnectException: Connection timed out: connect >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
MTPTransport.openServer (SMTPTransport.java:1227) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
MTPTransport.protocolConnect (SMTPTransport.java:322) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
Connect (Service.java:236) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
Connect (Service.java:137) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
Connect (Service.java:86) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
t.send0 (transport. Java:150) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
t.Send (transport. Java:80) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
ar.bx.dJ.a(MailboxWatcher.java:106) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
AR. BT. XR.b (CmimeParser.Java:385) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
AR. BT. XR.a (CmimeParser.Java:48) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
ar.xC.g(CmimeLayerPacket.java:68) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
ar.ac.hE.a(CmimeLayerReceivingQueueManager.java:65) >
<2009-09-26 13:45:47.546="" pdt="">:[352]:
AR. N.ab.Run (ListenForClientsPackets.java:82) >Similar Questions
'Tools' > 'Account settings' for the e-mail account
or
Right click on the email account in the folders pane, and then select "settings".
Lower-right - outgoing (SMTP) server - select the correct SMTP server for that e-mail account.
See the image below as an aid.
Click OK
Tell me the number of the account how recipient sees as venues.
'Job', account: 'pop3', server: 'smtp', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D now that I signed up with outlook.com, I wish I had the other implemented to send emails, and anything else I might need to do. Is this possible without too much difficulty?
http://answers.Microsoft.com/en-us/windowslive/Forum/mail?tab=all
http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all
If yes what OS are supported? For example, OS 4.2 or higher?
I work with an asp code and using CDOSYS to send my application. I enclose the code in order to review and see if you have solutions.
< %@LANGUAGE="VBSCRIPT"% >
<!-file = "Connections/register.asp #include" - > "
< %
Dim rsgetpassword__MMColParam
rsgetpassword__MMColParam = '1 '.
If (Request.Form ("txtusername") <>"") then
rsgetpassword__MMColParam = Request.Form ("txtusername")
End If
% >
< %
Dim rsgetpassword
Dim rsgetpassword_numRows
Set rsgetpassword = Server.CreateObject ("ADODB. Recordset')
rsgetpassword. ActiveConnection = MM_register_STRING
rsgetpassword. Source = "SELECT password, Email FROM dbo. ' Username WHERE UserName = ' ' + replace (rsgetpassword__MMColParam, "'", "" ") +" ' ORDER BY UserName ASC ".
rsgetpassword. CursorType = 0
rsgetpassword. CursorLocation = 2
rsgetpassword. LockType = 1
rsgetpassword. Open()
rsgetpassword_numRows = 0
% >
< %
If rsgetpassword. BOF AND rsgetpassword. When the EOF
Response.Redirect ("forgotpassword2.asp")
End If
% >
< %
Set myMail = CreateObject ("CDO. Message")
myMail.Configuration.Fields.Item (" http://schemas.microsoft.com/cdo/configuration/sendusing") = 1
myMail.Configuration.Fields.Item (" http://schemas.microsoft.com/cdo/configuration/smtpserver") = "" SMTP Server ""
myMail.Configuration.Fields.Item (" http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25
myMail.Configuration.Fields.Update
myMail.Subject = "Site name > here's your password!
myMail.From = "[email protected]."
myMail.To = rsgetpassword. Fields.Item ("Email"). Value
myMail.TextBody = "password:" & rsgetPassword.Fields.Item("Password"). "» Value & vbcrlf
myMail.Send
Set myMail = nothing
% >
I don't get any errors, but there is no e-mails either.
myMail.Configuration.Fields.Item (" http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
I tried to change my code to connect to a remote server and adding the IP address of the server. When I do that my page completely fails and the only error I get is Error 500. That tells me that there is an error in programming or server.
Please help me
Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.
In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is changed in lastname, firstname. This is the full name of my standard email address as I stated in my address book.
The message cannot be sent because the connection to the server of SMTP outgoing.verizon.net expired. Try again or contact your network administrator.
I use the same provider of e-mail for several years. This works for emails of simple texts without problem. If I try to transfer or to respond to an email, I get the same error.
How can I fix?
Thanks for the comments.Maybe you are looking for