Eclipse fails to package the project every other time I try to run BlackBerry Simulator

Similar Questions

• Why some items in 'Open an existing project' have just the name of the project and others have access to the entire file path?

  I have SP1 2012 LabVIEW and on the main screne of LabVIEW selecrt "show projects".

  Why some elements of 'Existing Open' (project) have just the name of the project and others have access to the entire file path?

  Examples of two lines in the list of projects.

  Ping.lvproj (with a path: C:\Users\mlevine\Documents\MPCE EQT\EQT Software\Ping.lvproj)

  C:\Users\mlevine\Documents\Common package Mission trainer (CMPT) \SUW Surface Warfare\Weapon permission Panel (WAP) \WAP LabVIEW Software\WAP fire authorization server 28 April 2015

  No chance, it's because I made a copy of this software and stored on a network drive power off and it went out of this network drive?

  So if LabVIEW sees two or more versions of the same software, he decides to use the name to differentiate between full path?

  I'd still rather it shows just the name of the project and if you hover over the name it shows the full path.

  Thank you

  Mark

  If you have opened a project of the same name from a different location, it is when it shows the full path both - in this case showing just the name of the project would not help because it would be the same thing!

• I tried several times using IE, Chrome and Firefox browsers (win) to download the files for Indesign CS6 - all of these attempts have failed to extract the files. Other parts of the plant extract successfully, so I don't think I have

  I tried several times using IE, Chrome and Firefox browsers (win) to download the files for Indesign CS6 - all of these attempts have failed to extract the files. Other parts of the plant extract successfully, so I don't think that's my machine or OS (Win 7 Pro). I have been fighting for three days and am losing patience fast. Advice or assistance will be appreciated.

  I finally got it to work using a different machine and copy the files on a USB stick for transfer to the machine I need installed on!

• Windows Media Center in Vista Home Premium must be restarted every other time I start a video

  Every other time that I select a recorded program to watch, Windows Media Center gives me a message that the drivers are not installed or loaded properly and I need to restart Windows Media Center.  What is happening with this?  I am running Windows Vista Home Premium version and keep my computer up-to-date.

  Hello
   
  There is no option to download the system files.
   
  If scan sfc does not resolve the files, you can follow the rest of the troubleshooting steps in the article to fix corrupt files: http://support.microsoft.com/default.aspx/kb/929833
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  Hello

  I suggest you try all the steps in the following article.
  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates.
  http://support.Microsoft.com/kb/836941

  I hope this helps.

• Is there a version of the "otwin.exe on-time" program that will run on Windows 7?

  Is there a version of the "otwin.exe on-time" program that will run on windows 7?

  Original title: a program running on windows xp

  It seems that this program was published in 1993 about, so unless the seller, Campbell Services Inc., has released a new version, the answer is probably not.

  He also seems to be a 16-bit program, and as such, it will not work on a 64-bit version of win.

• How to debug a project in netbeans without the deployment of the project every time

  Howdy,
  
  No idea how to debug JavaFX projects in netbeans without making every attempt?
  I have a < target name = "- post - jfx - deploy" > ant target just to build the distributable, but he gets run even if I'm just under the project in debug mode, which slows down a lot of things.
  
  Thank you!

  You can configure the standard NetBeans Java project (as opposed to a NetBeans JavaFX project) and specify the jfxrt.jar library in your classpath. You will lose all the support project packing NetBeans provides. However NetBeans take time trying to package (and possibly other undesirable tasks) during development.

  You may also have a separate project of JavaFX (NetBeans project or just an ant or maven build) that you use to build and test your final deployment packages when you need that.

  Note that the development in the intellij idea is similar in that you just put jfxrt.jar in your project libraries, and you can easily develop and debug applications quickly javafx without a need for a step in creating the separate jar which imposes JavaFX NetBeans for a project.

• InDesign, address book files, place objects, package the project

  I want to use a book file to combine several smaller files (let's call them "chapters").

  Each of my chapters has a number of objects (cmd - D).

  I said who placed objects remain outside the main .indd file and allow re-binder if one of these files is updated or replaced.

  I use the package tool menu to combine all the fonts placed objects and .indd (and PDF) file in one folder.

  I want to know how to use the objects placed in the chapters that are contained in a book file, and how to package everything when I'm done.

  Where each of the files belong (in which folder); and how they are organized when I pack them?

  How to make a copy of all of the compressed file, to start working on a new iteration [review] the entire book?

  I watched the tutorials and read what I can find.

  I can't find answers to how working together package, the book and the place .

  Thank you.

  • So you place graphics and text files in an InDesign doc (we'll call it aCHAPTERc) and use the features of InDesign to arrange a nice layout.
  • Repeat this process for each chapter.
  • Collect all of the chapters in a book for the paging file, generate a Table of contents, may be a clue.

  Now what? If you want to print, you can export the book to PDF and send it out for professional printing. Or you can package the book (use the menu of the control panel in the upper right of the book panel) and collect everything you need for printing through InDesign in a single project file, as well as folders nested for fonts and graphics. The zip file and send it out for professional printing.

  These days, providing a high-resolution PDF is more common. So, why use the package? Let's say you're not particularly organized. (I am and always start with a project folder and subfolders and put everything that relates to this project in these folders.) But let's say you're not. You can still use the package afterwards, just to collect and copy all of the assets of the project in a new folder (assets include book and chapter files, fonts, graphics and .idml file and a .pdf print quality). Zip, archive and you are ready, when someone says: "Hey, can I get a copy of this article moved you 10 years ago? What is happening to me more that you would think!

• Captivate 6 fail to export the project captions and subtitles

  Hello.

  I am using Captivate 6.1.0.319 on Windows 7.

  I have audio on my slides and captioning is selected on each slide, but when I export (file > > export > > project captions and subtitles), none of the text closed captioning is in the Word document.

  Most of the legends project appear, but not all of them.

  I've already renamed my preferences to OLD file to force the preferences to refresh.

  Any other suggestions?

  Thank you

  Tichelle

  Never mind.

  This seems to be a problem with corruption of files.

  The I'm working today with a particular file was initially created in Captivate 4.

  I opened another project that I created charges last month, and he has no problem with the export of legends; It works exactly as expected.

  I tried to copy all the slides in the projects that don't export, then paste them into a new project, but that did not help the issue-exporter.

  Tichelle

• Failed to open the project in Movie Maker - '... take longer that expected, you want to close this program? »

  original title: Windows Movie Maker

  Hello

  I am a Senior at Staples technician. I currently have a computer of the customers that I am; and I'm out of ideas. Whenever I try to open one of the clients video projects that they have3 created with Movie Maker, it will freeze and give an error message that says: "sorry windows movie maker takes longer that expected, you want to close this program? I can open the customer projects in version 6.0, but brand new and I get the same error above. Any help would be good.

  Thank you

  Hello

  I am a Senior at Staples technician. I currently have a computer of the customers that I am; and I'm out of ideas. Whenever I try to open one of the clients video projects that they have3 created with Movie Maker, it will freeze and give an error message that says: "sorry windows movie maker takes longer that expected, you want to close this program? I can open the customer projects in version 6.0, but brand new and I get the same error above. Any help would be good.

  Thank you

  ===========================================
  Is the format of the project files .mswmm?

  What version of Windows uses the client? XP? Vista?

  What version of Movie Maker is the client using to open the files?
  Win XP 2.1 / 2.6 Vista / Vista 6

  And do you know what version of Movie Maker creates the files?

  Before importing a file into Movie Maker... try to open Movie Maker
  and go... Tools / Options / compatibility... tab and left click of the
  "Restore all defaults" button.   Now try to open a file.

• Need a help. Please, I beg you. the project long render times.

  Hi there everyone!

  If im new in the world of Adobe AE. I need help. Watched a 100 videos and searched, but... I did an audio visualization for my youtube channel and want to restore the mix of 50 min. My PC config is 8 GB ddr4, skylake quad intel. GTX 960 m. Then, when I try to make it take so long! 24 seconds to display a preview is about 5-7 min. and for 50 minutes, it would be around 7hours! my laptop from heating even after 7 min of render. How can I speed up the rendering, and I have to do with the size of the video? I made in adobe encode. h.264 - 8 mb full HD - advice read on youtube too for the best settings. People please help

  Have a great day and tons of positive emotions!

  Unless your 50-minute video is one-shot with effects applied to the same shooting and there is no cuts nuts is to try to do this in a single computer in AE. According to effects applied to only one made of several minutes, that a framework can be normal and expected. The usual workflow for a project of 50 minutes would be to break into small pieces, if the effects on each segment are complex or very slow return, then you make each room when this is done. If the effects are simple and fast make you can consider using Dynamic Link to each piece in Premiere Pro for final assembly. More than 90% of my comps AE are less than 10 seconds, because most of the shots in the films that I produce are less than 10 seconds. Several times my compositions contain dozens of layers and can take up to four or five minutes a frame to render. Most comps are effectively created composite or motion graphics restitueront at the rate of 3 or 4 frames per second. Nowadays about half of my work is 4K, and I produce masters 4 K that are made to the HD for final delivery using Adobe Media Encoder to create an h.264 MP4.

  I'm just guessing that you have very long shots in your comp with a sort of music visualizations. If this is the case, every time that the music changes or there is a break, you break the project down into a separate model and then make this model in a lossless format visually. Because your system is currently taxed I would use the Cue Render to render these masters of the production. When you have all the parts made I would bring them together in the final project in Premiere Pro, which is the only way you'll be able to get an overview of real-time editing. Then use Premiere Pro to make the file available. This will save you time in the long run because rendering Cue and the output module will make faster than Adobe Media Encoder because TEA running AE in the background to do the rendering, it is less effective. The probability that a rendering of 50 minutes will fail repeatedly during rendering is very high, if all this makes your system resources. This will also give you time to check each section to see if you like it before moving on to the next section.

  I hope this helps. I would never and have never tried to edit one to animate a sequence in AE who was only a few minutes longer because it is simply too inefficient. I put a whole feature in AE to make color correction, but he is already gone and it is a layer that already went to a master of production. Therefore, unless all your effects are applied to a single video track for 50 minutes together, break the project and make it into pieces.

• Common organisation of the project in real time Code

  Hi people,

  I'm working on a project of RT using several cRIO chassis.

  I common code RT I want to use with the different cRIOs.

  What is a good way to organize the common code within the project?

  For example. I have the folder called "common RT.

  It seems that I have to put the folder this folder under a cRIO special so that the screws to be recognized as RT

  Are there other options?

  Thank you

  Steve

  Laughing out loud

  They will all point in the same VI and location but since each CRIO has its own compiler you must place the code under each cRIO.

  But if you make a change to the VI under the cRIO it will update for the rest also.

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• Convert the project in real time

  I started to develop a routine that (finally) will be "split" between a host PC and a remote PXI, using LabVIEW Real-time.  I usually test these things on the side PC and create them using LabVIEW project.  I just started a new 'project' and build first the host code.  However, I simply said "New project" and got a "project without real-time targets.  Is it possible to add a 'target' to this project, or what I need to start over with a new project explicitly in real time?  Is the (only) way to do this by selecting new project from the main menu of LabVIEW Real-time (2010)?

  Bob Schor (who should know the answer to that now...)

  Bob,

  All you have to do is right click on the name of your project (in the Project Explorer window) and select new > targets and devices. Select yout real-time target. From there, you can right-click on this target RT and tell New > VI, which will create a VI targeted to run on this RT controller.

  There is really no such notion as "a project in real time. All projects are the same, but I suppose a real-time project is one that contains a real-time target in it.

  See you soon,.

• Failed to retrieve the tablespace point in time recovery

  Hello
  
  I'm trying to recover the tablespace in times of recovery point, but his throw an error
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command recover at 27/04/2011 17:22:13
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06024: no backup or copy of the file of control found to restore
  
  Question: Should I take the prior backup before making the tablespace point in time recovery.
  
  Please help me.

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  The resource is busy, you will have to repeat the process.

  Anand