ECO mode and media buttons not working not not on my Satellite A665-S5173

Similar Questions

• Satellite A105-S4254 - some of the media buttons stopped working

  I have a Satellite A105-S4254 and media buttons just left a couple of weeks of work. (Those who control the Windows Media Player).
  The Web button and the film works, but none of the others.

  Any help would be GREATLY appreciated!

  Hello

  Have you tried reinstalling the drivers needed in order to get these buttons working again?
  If this isn't it!

  I put t know what OS you use, but the drivers needed and the tools are located on the Toshiba page us because it is a Toshiba laptop model we.

  See this page:
  http://www.CSD.Toshiba.com

• Satellite M645-6114 - ECO utility/media buttons not working not

  My toshiba satellite M645-6114 is about a month.
  Yesterday, I realized that the media buttons is no longer give me a symbol on the screen when I disable or turn off the wifi.

  In addition, the place of the arrow button no longer turns the lights on the laptop.
  Finally I can't open the eco utility at all.

  Thanks in advance for any advice.

  Hello
  The media keys (play, pause, eco button) are controlled by VAP (value added package). In addition to use the ECO button, the ECO utility must be installed.

  In addition the FN keys are controlled by Flash Card Utility Support and this tool seems not work so first check if you can solve this activation/restart tool, you can do it in all programs-> Toshiba-> Flash Cards

  If this does not work, reinstall the mentioned tools Note: after each installation, reboot the device!

• Satellite A300 - 15K - 2 media buttons stopped working

  Hello.

  I have a problem, the first 2 of my multimedia buttons stopped working...
  I tried to uninstall several times but it didn't help.

  I also have nothing to choose in the list in

  Toshiba Assist-> optimize-> Toshiba Button Support.

  I need help. (there were 2 posts before).

  Hello guys

  Can you please stop crying here, and perhaps tell us what the problem is here?

  Expensive J3... what you are writing about. What operating system do you use? What drivers? What kind of error?
  Multimedia keys are not controlled by drivers. What is - that you already tried?

  Hay metalbullet, the same questions for you - what order, what OS? Sorry, but you didn't offer any relevant information.

  Have you tried with this VAP suggested by Akuma?

• The mouse stops working but left and right buttons still work.

  I'm having a problem with my mouse, the cursor will stop working, but all buttons still work. I tried another mouse, uninstall and reinstall the mouse driver updated and change USB ports, so it is not automatically turned off. Nothing works I found so far.

  I found something here: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-64-bit-mouse-pointer-not-moving-but/fc581ad9-87ac-410e-a7ae-55ffcf626f03?db=5

• Vista Sidebar and Media Player stopped working after uninstalling Mcafee and AVG installation

  Hi, I'm new to the Dell Forums, my apologies if this isn't the right place to post this.

  Yesterday, I decided to remove Mcafee completely from my Inspiron 6400 (running Vista Ultimate) and install the free version of AVG. First, I downloaded the http://service.mcafee.com/FAQDocument.aspx?id=107083&lc=1033 and AVG Mcafee removal tool and was save on my desktop. I unplugged my internet connection, uninstalled Mcafee Security Center of programs & features (recommended by Mcafee), rebooted, then ran Mcafee Removal Tool Development. EXE, rebooted, installed the free version of AVG, went online and installed the AVG updates, performed a full scan with no errors. The system seems to work well, but then I noticed that the clock on Windows Sidebar gadget turned black, the deleted with only a yellow box calendar gadget. I tried to open Media Player, no luck because he would not just open. Tried to launch Media Player as an admin, no luck. While my connection is an admin one. There is another connection admin account so connected to this account, but you have the same problem. I did a system restore and also tried to create new accounts, but the same thing happens with the Gadgets and Media Player. I also ran startup repair by using the Vista DVD, no luck.

  Did somebody encountered this problem? There is an almost similar post under Vista (http://www.dellcommunity.com/supportforums/board/message?board.id=vista&message.id=41524&query.id=225388#M41524), but no solution. I had a feeling this uninstallation of Mcafee or running the Development. EXE may have messed up with the registry keys for the sidebar and Media Player. I also downloaded another gadget clock, no luck. Y at - it a fix for this? I don't want to install Mcafee again, as I had many problems with MCProxy and Spamkiller causing system crash and Mcafee has no solution so far. I also have spybot running on the system.

  I would appreciate if someone could help me with this. Thank you

  Message edited by arian30s on 12/22/2007 03:37

  
  

• RH11. Script to make the Next and Prev buttons to work as they do in a standard browser?

  Hello.

  I know the arrows to next and previous button in the navigation pane to take the user to the next or previous section specified in the sequence of browser. This means that the help author has design one or more sequences of navigation, which can be long and difficult to maintain.

  Someone at - he created a script, or know if there is, who can transform the Next and Prev buttons buttons that perform standard browser actions. For example:

  • The user opens the A section.
  • The user opens the topic J.
  • User presses the back button.
  • Help opens the A section.

  At the moment the results depend on the navigation sequence.

  • The user opens the A section.
  • The user opens the topic J.
  • User presses the back button.
  • Help opens the topic I have (the subject which precedes the subject J in the sequence to browse).

  Thank you. [

  Carol Levine

  Hi Carol

  I guess you overlooked this link on the page:

  

  Here is the link should be clicked: (this way you will not have to return to the page)

  Click here to see

  See you soon... Rick

• Mouse and keyboard no longer work after fixing drive dvd - Satellite A100-147

  My DVD Player wasn't working, so I fixed it with the help of some advice from a forum: go to regedit to remove the 'previous' and 'high' or something, I have a catalog specified.

  But then the keyboard and the touchpad is dead in Windows. Nor can I use an external keyboard and mouse.

  I tried to start it in safe mode and with the last settings that worked. None succeeded. Apart from the fact that the keyboard actually works to make choices, therefore, a question Ms.

  Ideas/fixes would be greatly appreciated.

  Computer: Equium a100-147
  OS: XP media center w/sp2 (I think)

  Maybe you deleted the upperfilters wrong or additional / lowerfilters?
  The correct key is {4D36E965-E325-11CE-BFC1-08002BE10318}

  Boot safe mode.
  Go to control panel-> Add/Remove Programs control
  Uninstall all software Mouse/touchpad/keyboard/logitech that can be installed
  Go to Device Manager
  go to view - > click on 'show hidden devices '.
  Delete all devices under "mice and other pointing devices" and "keyboards".
  Reset.
  XP should detect the mouse and keyboard and install the drivers.
  Download and install the driver for the touchpad to the A100 section drivers on the Toshiba site

• Front and rear buttons not working not not in Firefox mouse Logitech

  Firefox don't deliver - Logitech Performance MX mouse buttons for front, back or any other custom buttons are no longer works in Firefox! How to solve this problem? They work in the OS (Windows 7 Pro) and Chrome very well and as they USED to in Firefox. It is now almost useless and very inefficient to interact with Firefox. I prefer not to use Chrome so please advise on what to check or how to help. Years of HER background here if I can pick up some items and the test you would like to. Just need to work again.

  [SOLVED] To solve this problem, I did the following: 1) uninstalled Logitech SetPoint 2) restart Firefox in order to ensure the extension of Logitech (who has been disabled in any case) had disappeared and he had gone 3) resintalled Logitech SetPoint 4) re-setup of my duties of the Firefox - extension watch Logitech 5) started key combination again and again deactivated (why Logitech installed without asking the user for authorization I don't know!) (6) tested and now all my buttons and key combos once more work in Firefox (phew!)

• Back and next buttons not working not

  I do a test which when you click Next, it goes to a given and if you press back it goes back to the previous specified framework. The code works when I go through the code one time completely to the front and rear, but once that I'm trying to move again, he jumps on all pages of inbetween and ends at the last page. The button "return" code works very well, it was only the NextBt code that does not work well.

  Section 1:

  Stop();

  NextBt.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_14);

  function fl_ClickToGoToAndStopAtFrame_14(event:MouseEvent):void
  {
  gotoAndStop (5);
  }

  Section 5:

  Stop();

  backBtn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToNextFrame);

  function fl_ClickToGoToNextFrame(event:MouseEvent):void
  {
  gotoAndStop (1);
  }

  NextBt.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_12);

  function fl_ClickToGoToAndStopAtFrame_12(event:MouseEvent):void
  {
  gotoAndStop (10);
  }

  Section 10:

  Stop();

  backBtn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_6);

  function fl_ClickToGoToAndStopAtFrame_6(event:MouseEvent):void
  {
  gotoAndStop (5);
  }

  NextBt.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_13);

  function fl_ClickToGoToAndStopAtFrame_13(event:MouseEvent):void
  {
  gotoAndStop (15);
  }

  Section 15:

  Stop();

  backBtn.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);

  function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
  {
  gotoAndStop (10);
  }

  I'm new to Flash and for years I wrote the code. I have no errors, but code does not work as I would have taken it would. Any help would be greatly appreciated.

  Thank you.

  Yes, his vacuum cleaner to have only one of each in the timeline and let the code strive to manage travel expenses. And if there is no reason for the separations between sections, simply use nextFrame() and prevFrame() for orders of movement... otherwise just space them also use something like currentFrame + 5 (or 5 images, or be it at the next stop)

• Satellite L850 - media buttons not working not properly

  Hello

  I have a laptop Toshiba L850, I had only a few months.
  yesterday when I came to play music on my laptop, the sound wudnt turn upwards or downwards when I pressed the volume buttons, they only work if I press FN.

  now when I got to the laptop I didn't press the FN key,
  I just pressed the keys f 8 and 9,

  can someone tell me please why as this changed
  Thank you

  Toshiba accessibility is the key!

  Start Toshiba Accessibility (accessibility type search)
  Check the box use the key sticking FN
  Put a checkmark next to the desired option
  Click OK

  Now you can use the features of FN buttons without pressing the FN key

• try to get out of the Setup Wizard mode and secure windows not installed right

  in the Middle using my wireless mouse, my laptop has slipped into my keyboard and my mouse is not responding. I tried to reinstall the ihome cd and I get an error saying my computer is in safe mode or my windows installation wizard is not installed right?

  Hey ludovicrohr,

  It would be possible that the Windows Installer is damaged. Follow the suggestions in the article given below to repair windows installer issues.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us

  Once it is resolved, try the installation and see if your keyboard and mouse started working.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer keeps going into power saving mode and it is not configured for it... What can I do

  My computer guard shut down in power save mode... I installed everything that has been suggested to correct this, but nothing works

  Read the documentation that accompanies and/or to communicate with the computer manufactures Technical Support.

• Equium A60 media buttons stopped working

  I don't know what I've done, but all of a sudden my button of media on top of my keyboard stopped working. I reinstalled the Console and controls, and now the Internet Launch button works but not the buttons play/stop/etc with Media Player.
  Help, please

  Go to the control panel and select the application of controls of Toshiba.
  Here, you must select the MediaApps tab.
  Please check if the command audio CD and DVD video control options are defined.

• Player and Media center stop working

  How to remove the program and reinstall

  Hello

  Lets work WMP get and which could kickstart WMC working as well.

  Have you recently installed another player?

  Right-click on taskbar - Task Manager - processes and see if WMPlayer.exe is already hidden.
  If the end then on her process.

  --------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? You added another
  reader recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html
  ----------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  --------------------------------------------------------------

  Have you recently installed another player?

  Reset your associations:

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
  How to associate a file Type of Extension to a program under Vista
  http://www.Vistax64.com/tutorials/69758-default-programs.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.