Similar Questions

• iPad cannot be activated because the activation server is temporarily unavailable

  I've updated my ipad with recent IOS.  Now my ipad cannot be activated because the activation server is temporarily unavailable.  Any suggestions?

  have you contacted apple support team, question do you have to solve the problem seen yet, remember the question, waiting for the support team! hope it's a simple solution to solve

• My Ipad 2 cannot be activated after update IOS 9.3

  Personal Hello to apple, I use ios ipad 2 9.1 or 9.01 (I forget the details). today (22 March 2016) I'm trying to upgrade to ios 9.3 using wifi to connect. After download, install then reboot, my ipad cannot be activated. the error message:

  "your ipad could not be activated because the activation server is temporarily unavailable. try to connect your ipad to itunes to activate it or try again in a few minutes.

  If the problem persists, contact apple to apple.com/support support.

  so I try to activate via itunes (my itunes version 12.3.3) and got the error message:

  iTunes could not verify your device.

  Disconnect and reconnect your device.

  If the error persists, please consult your nearest Apple Store for assistance.

  To find your nearest Apple Store, click here.

  Someone please help, what should I do?

  Give it some time and try again. If you can not always activate, visit an Apple Store, as indicated in the message. Also, this is a user forum, so you do not discuss personal Apple here. -AJ

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• Scan of the computer cannot be activated.

  HP Photosmart Pro N911a 8600

  OS X 10.8.3

  I'm unable to scan from the printer on my Mac.  The Mac does not appear on the list of available devices ' scan to ' on the printer (although my other Windows computers do).  Enable the computer to the printer utility analysis does not work.  I get the error Scan of the computer cannot be activated ~ unable to communicate with the device.  I uninstalled and reinstalled all the software and drivers for the printer.  I have also tried to enable sharing on the Mac, but still does not work.  I can do EVERYTHING else very well including the analysis of computer to the printer.

  Hello

  Please go to System Preferences > sharing.

  Ensure that the computer name field is set and include only English characters...

  Otherwise, click on modify and change accordingly.

  Now, restart your Mac and check differences while allowing the Scan of the computer.

  If the same persists, click on the Apple icon, install any available software update and see if that can help you.

  If there is still no try to change reset the printing system, then reconfigure the device by following the HP Installation Wizard (under Applications > Hewlett-Packard > utility device) and look for any change.

  If there is still no change, remove the software by following the HP uninstaller program.

  Then go to computer Finder > Macintosh HD > library > printers and move the HP folder to the trash.

  Open the PPDs > contents > resources. You can search the 8600 folder and remove its pilots in the trash.

  Fix permissions of the drive as follows to avoid any possible permissions problem:

  Hello
  Follow the steps below to repair disk permissions:
  
  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Finally, reinstall the latest version of the software below by selecting the recommended HP software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=4142&product=4323659&sw_lang=

  Shlomi

• HP TouchSmart 4-1223tu Ul ENVY: Bluetooth cannot send file

  Hey guys...

  Can you help me?

  My problem is that my bluetooth cannot send files to another device. but to receive the file.

  I tried to remove the device and re-team again, but another problem was to occur. I can't add devices.

  I also install the driver "intel bluetooth driver" but it has no effect.

  y does it can someone help me?

  Thank you so much yo

  Hi there @vaniarahma,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I looked into the problem that you are having with your bluetooth does not connect to other devices.

  What you're trying to connect to your laptop or your laptop connect to Bluetooth?

  Did you check the specifications of the other device to ensure that it is not a special provision (both feet far etc.)?

  I've found a few documents for you that can help.

  The first document that I found is called using Bluetooth (Windows 8) devices. This document can be useful because it will guide you through connecting devices.

  The second document, I found called understanding and troubleshooting Bluetooth wireless technology. This document has other useful information about drivers, ensuring that everything is bluetooth enabled, fixing the problems of bluetooth, etc.

  Please follow these troubleshooting steps, re-post and let me know how everything went.

  Have a great day!

• the Windows vista firewall authorization driver is missing, the cause of the problem that the firewall cannot be activated? How to fix?

  Recently my fireall cannot be activated? I tried manually put on throughout the service, no luck. Then, I checked the firewall authorization driver is absent, it is the cause of the problem that the firewall cannot be activated? How to fix?

  Hi James,

  Thank you for your e-mail. I solved the problem using System Restore.

• Windows Firewall: get the message that the firewall cannot be activated because a "service is not associated with running.

  In the last days is message that my computer is not protected by a firewall. I followed the recommendations to enable the windows firewall (both through the alert procedure and the control panel); but get message that the firewall cannot be activated because a "service is not associated with running.

  I'm usually protected by the free AVG service and its protection of identity theft.

  How can I recover the windows firewall?

  How to turn on the windows firewall?

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security, and then clickingWindows firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended), and then click OK.

  If you want the firewall to block everything, including the programs selected on theExceptions tab, select theBlock all the incoming connections checkbox.

  WARNING: More than a firewall running at the same time program could lead to conflict. It is best to use a firewall program.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my Bluetooth cannot connect to my shoqbox

  connection come with a pop-up alert indicating that "Audio driver is not available, please make sure that the audio device works properly.

  Edit:

  Re: my Bluetooth cannot connect to my shoqbox
  Thanks for the reply. tried the methods you suggested but no luck. The pop alert is that when I try to connect my Philips Shoqbox Bluetooth speakers to my laptop. on its own my phone have no problem with the sound, it works very well. Just to tell you in my page of my Shoqbox Bluetooth device is associated.

  		Re: my Bluetooth cannot connect to my shoqbox SEE SLIDE SHOW DOWNLOAD THE SET This album has 3 photos and will be available on SkyDrive until 07/07/2013.

   

  Hello

  As the problem seems to occur only when you connect the Philips Shoqbox Bluetooth speaker to your laptop if you may need to install a driver for the same that is missing or a utility.

  Contact Philips support so that they could help you with this problem.

  http://www.USA.Philips.com/c/audio-system/black-8W-sb7200_37/PRD/en/;JSESSIONID=1D21084BD91239AF8C44EFC0204D96E9.app121-drp2?t=support

  It will be useful.

• ThinkPad Edge 320 locks

  Hi I just got my new thinkpad edge 320, and from time to time he hangs, go to the login screen, apparently without reason. This isn't when it is inactive, that it seems to happen more if I close my browser. I searched all the lock settings and put them on lock No. Can anyone help?

  I discovered that it's Chrome - when I left Chrome it locked. So I started to use firefox instead, and it's fine now.

• Error message: specified Principal cannot be activated.

  I send you this SOAP envelope:
  < soapenv:Envelope xmlns:soapenv = "http://schemas.xmlsoap.org/soap/envelope/".
  xmlns:ws = "http://www.oracle.com/beehive/2010/01/ws".
  xmlns:BEEH = "http://www.oracle.com/beehive" >
  < soapenv:Header / >
  < soapenv:Body >
  < ws:listEmailMessages >
  < / ws:listEmailMessages >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  For the service of this hive:
  
  http://myhost/WS/SOAP/MessagingService
  
  Receive this response:
  <? XML version = "1.0" encoding = "UTF-8" standalone = "yes"? >
  < ns4:Envelope xmlns:ns4 = "http://schemas.xmlsoap.org/soap/envelope/".
  xmlns:NS3 = "http://www.oracle.com/beehive/2010/01/ws".
  xmlns:ns2 = "http://www.oracle.com/beehive" >
  < ns4:Body >
  < ns4:Fault >
  NS4:Server < faultcode > < / faultcode >
  < faultstring > specified principal cannot be activated. < / faultstring >
  oracle.beehive.platform.soap.service.fault.SoapException < detail > < exceptionType > < / exceptionType > < / details >
  < / ns4:Fault >
  < / ns4:Body >
  < / ns4:Envelope >
  
  
  I am passing the username and password for the user I want to retrieve emails for as part of the http header request. The error message is a little cryptic, and I don't know where to go from here.
  
  Thank you
  Maynard

  Hi Maynard,

  API, it looks like "listEmailMessages" takes two arguments. They do not seem to be declared in your soap request. In addition, noticed that the first argument is the id of the Inbox.

  http://download.Oracle.com/docs/CD/E16671_01/BH.200/E22020/methods/Messaging_EmailMessage_listEmailMessages.html

  ex.

  
  
    
      
        
          
          5FE1:3669:afrh:858668CA8DB21925E040E40A19DE3C13000000002B59
        
        
          
            
            2011-04-25T17:48:03.996-04:00
          
        
      
    
  
  

  Kind regards
  Ward

• HP Pavilion P230AX 15: Bluetooth cannot find any device

  Hello. I have a HP Pavilion 15 P230AX with Windows 7 Ultimate 64 bit running on it.

  in a year, I never use my bluetooth to connect to any device. and now, when I want to connect my phone (romaric redmi 3 pro) both of my device (laptop and smartphone) cannot recognize each other. bluetooth always says "(searching for devices...)"

  

  1. I have restart the service in services.msc and set the bluetooth for 'salvation' and 'automatically' in Device Manager

  

  2. I have reinstall my bluetooth driver, and it is updated

  

  3. I try to follow the steps on http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/No-bluetooth-device-was-detected... but, he can't help.  And in HP wireless assistant, it said

  

  It says people with reduced mobility, but I can connect to the internet. I don't know who is wrong, me or the software.  and the button "Enable all" gel.

  Help me please.

  NB: I'm sorry for my English

  Hi @GerhardSitorus,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you need help with Bluetooth pairing for your device from romaric. It'll be a pleasure to help you with this.

  You did a great job on diagnose the problem on your side. Kudos to you on this point. It is always a privilege to work with tech-savvy and technically competent customers like you. We greatly appreciate your relationship with HP. I am amazed at your technical skills and expertise. Brilliant work!

  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, we must determine whether there is conflict. For clarity, I would need more information.

  • Have you tried your Pro 3 romaric Note matching with another device to rule out the possibility of Bluetooth connectivity issues with it?
  • Have you tried to associate any other device with your computer to check whether the computer Bluetooth works properly?

  I ask you to first isolate. For now please follow the steps in this link: http://support.hp.com/us-en/document/c01060335

  Link 2: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c01590950

  If it still not solved, please update the bios, the chipset and drivers Bluetooth http://hp.c/om/drivers if it has not been done.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• disable the Bluetooth cannot depend on

  Bluetooth suddenly turn off and can't turn it on again.

  Message says bluetooth: bluetooth is not available. Bluetooth PAN is not connected, no bluetooth PAN not found.

  The wireless keyboard has power.

  Try restarting com + opt + pr, may not work.

  Remove the com.apple.bluetooth. plist, cannot work.

  I used the disk utility to repair the startup disk.

  Something has been repaired.

  I restarted the iMac.

  The bluetooth came back as usual.

• Bluetooth - cannot find tools

  Hello

  When I bought the laptop, it shows that there is an avalaibilty of bluetooth function. But when I use and you try to find and use it, it cannot connet. I found there is software in the laptop which is Broadcom 2070 Bluetooth 3.0.

  Is this laptop came with bluetooth?

  Information on my laptop is:

  Product name: Pavilion dv5 Notebook PC

  Product number # WW112AAR

  Operating system: Windows 7 x64bit with service pack 1

  Thanks, hope you can help solve.

  Hi Evelyn383, I see that you have problems with the Bluetooth on your computer as well. Please click on the link I added to solve this problem.  http://support.HP.com/us-en/document/c01927258

  Thank you.

• HP Officejet 7610: Scan of the computer cannot be activated or scan and combine them into a single pdf document.

  I've recently updated to macOS Sierra 10.12 and scanning to HP computer software cannot be located when I open the HP utility.

  I can't find a further recommended HP software for my device other than El captain in operating system online.

  If I try to scan through preferences systems for printers and Scanners I can open the scanner, but I can't create a PDF combining into one document - it cancels the procedure after about 2 pages!

  The scan HP Destinations 'PDF for Adobe Reader' is red 'could not locate the target application that might have removed or uninstalled. File format = "PDF".

  How can I get that back?

  Thank you

  Hi @JOGL,

  Thank you for joining the HP Forums!

  I understand that computer analysis can not be activated as well as the scan and combine them into a single pdf document. With your printer HP Officejet 7610. I am pleased to see that for you!

  At this time for this model. There is no software and drivers for Mac OS X 10.12 again, given that the operating system has just been launched, it could take some time. For the time being, you can try to use HP Easy Scan to see if that can meet your scanning preferences. In otherwise, all we can do is wait for the software and drivers to be released.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Thanks for posting and have a nice day!