the Windows vista firewall authorization driver is missing, the cause of the problem that the firewall cannot be activated? How to fix?

Similar Questions

• Windows Vista Firewall: Uncheck basic network layout would make my computer more secure on the Public network?

  I use the Public network a lot.  I noticed that on my Windows Vista firewall, Core Networking is checked on by default.  Unchecking it would make my computer more secure on the Public network?  I already checked in my firewall settings, block all incoming connections.  Regarding security, I run MSE, like Spyware Blaster in the background.  Automatic updating and Malware Protection are on.  My other security settings are OK.  I do not understand why Core Networking is checked on by default.  This would make an open port, right?  Unchecking it would make my computer more secure?  Thank you.

  Hello

  If you uncheck Core Networking IPv4 and IPv6 will be unreliable or blocked.

  You have a router, a firewall (today, most have them) which is excellent protection
  for your network against external influences. In addition, Windows Firewall.

  Windows Vista Networking-
  http://TechNet.Microsoft.com/en-us/library/bb742618.aspx

  Better to use WPA/WPA2 security if they are available and you can hide the SSID that will help
  help others to see the network (note on some routers more hide the SSID)
  causes of connection problems and if they find out the name he is more useful).

  Wireless network general recommendations of security for individuals
  http://theillustratednetwork.MVPs.org/LAN/SoHoWirelessSecurity.html

  Introduction to wireless network security
  http://netsecurity.about.com/od/Hackertools/a/aa072004b.htm

  10 tips for Wireless Home Network Security
  http://compnetworking.about.com/od/wirelesssecurity/TP/wifisecurity.htm

  Securing your wireless network
  http://www.practicallynetworked.com/support/wireless_secure.htm

  How to secure your router Linksys Wireless - similar can be used for other routers
  http://www.pctipguys.com/index.php?option=com_content&task=view&ID=57&Itemid=36

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  Hope these helps.

  Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Firewall: get the message that the firewall cannot be activated because a "service is not associated with running.

  In the last days is message that my computer is not protected by a firewall. I followed the recommendations to enable the windows firewall (both through the alert procedure and the control panel); but get message that the firewall cannot be activated because a "service is not associated with running.

  I'm usually protected by the free AVG service and its protection of identity theft.

  How can I recover the windows firewall?

  How to turn on the windows firewall?

  1. Open Windows Firewall by clicking on the button start , clicking Control Panel, clicking Security, and then clickingWindows firewall.

  2. Click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on (recommended), and then click OK.

  If you want the firewall to block everything, including the programs selected on theExceptions tab, select theBlock all the incoming connections checkbox.

  WARNING: More than a firewall running at the same time program could lead to conflict. It is best to use a firewall program.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this?

  After I publish my movie with windows maker movie at 03:00 in the video, the screen goes black, but the music is not yet how to fix this? all past images 03:00, but the video clips don't.

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Make a movie in four simple steps

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

• Windows Vista security alert sending indicating virus attack and does not allow me to get security alerts. How to bypass or disable?

  Windows Vista security alert sending indicating virus attack and does not allow me to get security alerts.  How to bypass or disable?  I have another anti-spyware (Kapersky) program that manages all aspects and indicates no virus found.

  I want to disable Vista, but it won't let me and the only solution it says is to download a update for a cost.  Help, please.

  The 'alert' is not from Vista. Your computer is infected by a rogue security program. It's called "thugs" because he pretended to be a good guy but is really bad. Don't pay them!

  Bleeping Computer has the removal of many variants of thieves here steps - http://www.bleepingcomputer.com/virus-removal/remove-antivirus-vista-2010
  You can also check for the stages of removal at these links:

  Bleeping computer removal how - to - http://www.bleepingcomputer.com/forums/forum55.html
  Malwarebytes malware removal guide - http://tinyurl.com/5xrpft

  Malwarebytes' Anti-malware (MBAM) or SuperAntiSpyware will often do the job. Both have free versions and you don't need to buy these programs.

  These can work for you, and all can be good. However, in many cases the computer will also infected with other horses of Trojan and protected by a rootkit. These machines are extremely difficult to clean. If your machine is one of these cases, either the interactive assistance to one of the specialty forums listed in the link below, OR take your machine to a professional on the local computer OR backup your data and do a clean install of Windows. It's your choice. I do not recommend using BigComputerStore/GeekSquad types of places.

  http://www.elephantboycomputers.com/page2.html#HJT-links MS - MVP - Elephant Boy computers - don't panic!

• Scan of the computer cannot be activated.

  HP Photosmart Pro N911a 8600

  OS X 10.8.3

  I'm unable to scan from the printer on my Mac.  The Mac does not appear on the list of available devices ' scan to ' on the printer (although my other Windows computers do).  Enable the computer to the printer utility analysis does not work.  I get the error Scan of the computer cannot be activated ~ unable to communicate with the device.  I uninstalled and reinstalled all the software and drivers for the printer.  I have also tried to enable sharing on the Mac, but still does not work.  I can do EVERYTHING else very well including the analysis of computer to the printer.

  Hello

  Please go to System Preferences > sharing.

  Ensure that the computer name field is set and include only English characters...

  Otherwise, click on modify and change accordingly.

  Now, restart your Mac and check differences while allowing the Scan of the computer.

  If the same persists, click on the Apple icon, install any available software update and see if that can help you.

  If there is still no try to change reset the printing system, then reconfigure the device by following the HP Installation Wizard (under Applications > Hewlett-Packard > utility device) and look for any change.

  If there is still no change, remove the software by following the HP uninstaller program.

  Then go to computer Finder > Macintosh HD > library > printers and move the HP folder to the trash.

  Open the PPDs > contents > resources. You can search the 8600 folder and remove its pilots in the trash.

  Fix permissions of the drive as follows to avoid any possible permissions problem:

  Hello
  Follow the steps below to repair disk permissions:
  
  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Finally, reinstall the latest version of the software below by selecting the recommended HP software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=4142&product=4323659&sw_lang=

  Shlomi

• Publication of the film on movie maker half lower part of the screen is green. How to fix?

  original title: Windows Movie Maker
  Publication of the film on movie maker half lower part of the screen is green. How to fix?

  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format.

  This image shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

• all the file (Application) has changed how to fix .exe type

  all the file (Application) has changed how to fix .exe type

  Hi Jonathan Charly.

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  
  Method 2: run the fixit available in the link below and check if that makes a difference

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• Windows Security Service cannot be started, how to fix this?

  Hello
  I use Windows 7 Home Premium. Window Defender won't start. When I click on it in the Panel, he says "this program is disabled." There is a link that says: "If you do not use this program, click here to turn on. When I click on this link I get the message "the dose of specified service does not exist as an installed service (error code: 0 x 80070424)". " When I go to the Panel and the Panel of Services, the program is not listed. So I downloaded the program and tried to install it. He would not have installed. I get an error that says it is part of Windows Vista and requires no installation. It's strange to me that I am running windows 7.
  I then in the center of the Action. There, I found the Windows Security Center Service is disabled. There is a button to turn it on. Thought that would solve my problem I clicked it, only to get the message, "The Windows Security Center Service Can not be started."
  I ran the program Microsoft Fix It. There is no problem. The program is not there or if it is I don't think that and it want let me install it.
  Can you please tell me how to get Windows operational defender and how to get started (running) Windows Service Security Center.
  Thank you... David Sam

  Some other security programs will be disable Windows Defender, it is normal to prevent conflicts.

  Do you have what security/antivirus program installed?

• 800F081F is the error message I receive, how to fix?

  Ideas: 800f081f is the error message I receive, how to fix?

  We need a lot more information to help you.  When this happens?  When did start?  Have you recently installed or removed any hardware or software (if so, exactly what)?  What is the full and EXACT error message (Word for Word)?  What version of Vista are you using?  How many times does it happen?  What do you do when it happens?  What are the consequences of the error (because the system crash, the program to close, you lose your network connection, you cannot download an update and something does not work,...)?  Please read the following before answer you:http://support.microsoft.com/kb/555375/en-us.

  In the meantime, try the system update readiness tool: http://support.microsoft.com/kb/947821 to see if that helps to solve the problem I see he often mentions in discussions related to this error code.

  Thanks and good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my pc goes on the user account of temoprary how to fix

  my pc goes on the user account of temoprary how to fix

  This implies that there is corruption of the profiles on your normal user account.

  You have an administrator account that you can connect to then you can try to fix it?

  If this is not the case, see the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, post it here; I'll keep an eye on your question.

• I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  I bought 50 weeks to Go on my iphone and my cpu it always says I'll run out and have only the 5 GB, I had originally. They are the same accounts and idea how to fix?

  Have you tried signing off iCloud desktop and then signing again? If you check on the phone, does show the plan 50 GB? Are you sure that the two devices are signed on the same iCloud account?

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  Hi elizabethg,.

  Photoshop CC 2015 would require minimum Mac OS 10.9, therefor you can maximum download the trial version of Photoshop CC 2014 which is compatible with the version of Mac OS you have.

  Download link: direct download links of Adobe CC 2014: Creative Cloud 2014 Release. ProDesignTools

  We will also recommend you use Photoshop CS6 trial, because if in case you want to buy the trial then its available through the third party dealer as a standalone application.

  Download Creative Suite 6 applications

  Configuration of Photoshop

  Kind regards

  Mohit

• Firewall Windows authorization driver is missing - mdsdrv.sys and therefore cannot start the Windows Firewall

  Original title: "Missing mdsdrv.sys driver is missing on my system so I can't launch the firewall. No idea how to restore this driver? "
  I tried the solution of SFC/SCANNOW - nothing appears. The TXT file is empty.

  I tried the solution repair.bat - nothing - not even sure it ends; the black screen disappears without any messages

  I tried the Microsoft Fix - it - nothing outside of a message 'Sorry - you'll have to Fix-it-yourself' telling me the firewall must be enabled manually. YES, I KNOW WHO!

  I'm going crazy that I installed and uninstalled various malware detectors/antivirus programs and still no change. I'm sick to death of it and above which, I can not install my new printer/scanner because he needs the firewall so that it can communicate with the laptop and of course the firewall is in a coma so don't not speaking.

  My husband has a computer on which the Firewall works, can I just copy the folder more or what I need to back up and reinstall Windows 7?

  Hello Kiwipon_CC,

  Do you have any other software installed that contains a firewall?  How long have you had this problem and have you made changes to your front the computer this error?  You have installed new software before it happens?

  Firstly, I would like to launch a full analysis of the software removal antivirus and malware, you have already done.  I would then run a SFC scan to see if it can fix this problem.

  SFC: How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows 7

  http://support.Microsoft.com/kb/929833

  Please let us know status.  In addition, please see the link below.

  Windows Firewall problem:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/0f4f6e47-afd3-45c7-8182-9487595270b1/