Edge & Chrome debugging problem

Similar Questions

• Edge 2 - driver problems / random black screen

  I have a relatively new Lenovo Edge 2 a few months old.

  Problem I have currently: screen goes black randomly, but the light is always on, no mouse pointer, sound turns off too (similar to the hibernation perhaps?).

  I get a message at the beginning to the top there is a problem with one of the pilots. But when I check the drivers, everything seems to be up to date (its set to automatically in any case).

  I had a similar problem before, another message from pilot. The problem was that my laptop don't would not connect to wifi at less than the power mode has been totally exacerbated. Something about the laptop thinking its low in battery mode and the abandonment of wifi connection, I connected via electrician and updated the driver wifi I think and the problem solved. What is a similar problem? There seems to be a problem with this laptop and the sleep mode / low status for the battery maybe mode driver. How can I remedy this?

  In response to the reports of customer displays or screens turning off on Lenovo while in use systems and works on battery, Lenovo released a solution via the Intel Management Engine Firmware update, v.11.0.0.1176.

  The Intel Firmware has been approved for the following models:

  • IdeaPad 300 s-14ISK, 500-14ISK ideapad
  
  
  • Lenovo Edge-2-1580
  
  
  • Lenovo, Flex 3-1480, Flex 3-1580,
  
  
  • 500-14ISK, 500-15ISK Yoga Yoga

  Firmware Intel ME can be downloaded here: http://support.lenovo.com/us/en/downloads/ds105001

  If the solution provided by Lenovo does not resolve the problem for you, other customers report that a workaround solution provided by the MattDN93 client also solves the problem. More information on workaround can be found here: https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/Flex-3-screen-turns-off-when-working-on...

  Thank you

• After debugging problem impossible to download all the games online in my office.

  I can't open a new online games installed in my office that this problem starts when debugging appeared in my office. It is said like this:

  I have set the debugging by just going to tools, options, internet + advance + turn off debugging. Am I wrong?

  but there is always one:

  ERROR:
  WRUPDATER: Access denied p1_0_55_sub2.zip.

  my pc have the problem or the game...? all online games, I tried to download does not work.

  Hi khirenmaya,
   
  Have you downloaded the games from a particular Web site?
  Have you tried downloading from another source and see if that helps?
  What games did not run after installation?
   
  In the meantime, you can perform the following steps to determine where the problem lies.
   
  Step 1: Try to disable antivirus, firewall and other security software installed on the computer and check if you are able to play these games. If you can not then make sure allow all those who you have disabled.

  Step 2:

  Uninstall and reinstall the game.

  Check if the problem persists.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• Google Chrome Pixelated problem

  I recently bought the v7 - 581 (touchscreen) Acer i7 series.

  out with the windows 8 OS.

  I downloaded the Google Chrome browser and discovered that the browser text and the entire screen of chrome are pixelated. I mean not clear. It only happened in Mozilla and IE browser.

  Anyone has the same problem or a solution for this maybe? Thank you.

  Thanks to dbcalo!  I finally find a solution to this problem.

  Those who see it, follow step by step:

  (1) go to your desktop and right click on choose the resolution of the screen

  2) click view on the top bar

  (3) then click on custom calibration option

  (4) then choose your own settings for my acer v7 581 i7 touchscreen, it is preferable to 135%

  say hi to your new google chrome unpixelated really a big thanks to @dbcalo

• Edge 13 sleep problem win7 (intel)

  Hello

  I think I have a sleep problem with my edge. If I close the lid, I can still hear the hard drive by clicking on current time to time and CPU fan. I checked all the power settings and it should go to sleep and nothing should stop going to sleep. Case may be where the cover he never sleeps, but if I choose sleep from the start menu, it will sleep. And I checked all the places it should go sleep by closing the lid.

  Thing worries me a bit, it is that if I run in prompt command "powercfg - a" he reports this computer only supports the S3 (hybrid sleep) and S1 and S2 modes are not supported.

  Mystery solved:

  HW problem!

  A magnet located in the lower right corner of the cover of the computer, under the screen rectangle shaped box is too low!

  I tried one of my magnets "fridge" on the top of my power button and computer went to sleep state and _stayed_ in mode standby.

  * Sigh * I wonder what I should do to fix this problem? Magnetic tape to improve the weak magnet on my computer?

• debugging problems of Simulator 9100

  I join a simulator course, 9100, Eclipse api 1.1, 5.0.

  I'm getting something I can set breakpoints, but it's in a weird State.

  When the debugger is endearing, it says it can't find the rim cldc and modules of system operating with debug info.

  When I look in the directory of Simulator, they are, under the Debug dir, here:

  C:\Program Files (x 86) \Research in Motion\BlackBerry Smartphone simulators (9100)\Debug\net_rim_cldc-1.debug 5.0.0\5.0.0.676

  (and the largest number of files).

  So when my application appear in the debugger, I can see local variables, but not in

  the battery, in one of the api.

  The app is not properly, but I can't debug without resolving it.

  I don't have this problem when I join other simulators.

  What could be wrong?

  Thank you

  lucidbee.

  I think it was a problem of process.

  After downloading a new Simulator, I have to quit and restart Eclipse.

  Then I can select the Simulator in debugging or running again and this

  problem goes away.

• Solid Edge SFX installation problems.

  I am a student in engneering. I downloaded the SolidEdge sfx from the home page. I installed it and after installation it asks me the crtificate file I also joined it after if I clck on the edge icon it runs for awhile and faints. I tried several times it starts wount. Help, please

  original title: SolidEdge

  Hello

  The problem persists with a particular application?

  Run the Fixit and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer

  Hope this information helps.

• ThinkPad Edge 15 wireless problems

  I have 3 thinkpads that after a reload of fees cannot connect to wireless networks. I went through and installed different drivers wireless on lenovo Web site.

  I went through several stages, others have had similar problems, but he has not made a difference.

  I have installed:

  Shortcut keys & patch

  Power Manager & pilot

  Chipset

  The realtek - ethernet networking and communications LAN adapter driver

  I installed and removed each available wireless adapter

  ThinkPad Edge 15

  Type: 0319-46U

  On a side note in the Device Manager screen there is an alert of "Network controller" saying no driver installed for this device. I conclude that it is a Realtek device, but beyond that, I'm lost.

  adamcz28 wrote:

  I have the same problem with the same laptop.  The link provided is consistent with the provisions does not solve the problem for me.  Always on display unknown network controller.

  ' afternoon.

  Welcome to the community!

  Please try: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014079

  Once you install, please post back. It may or may not be a few extra steps to operate fully.

  Cheers.

• Battery Lenovo Thinkpad Edge 13 (0217) problem

  Hello guys,.

  Because I couldn't find a solution for my problem, I decided to write here, hoping that someone (by a team from Lenovo or users) have the same problem and therefore can help me.

  I have a Lenovo ThinkPad Edge 13 model (version 0217). (I bought from a friend, because he didn't deliver more when I decided to buy it.)

  I have problems with my battery. The design of this capacity is 62.12 Wh, I used it wisely, so it was not always charged to 100%. I always unload down around 5-7% and then plug the power adapter. (See image).

  

  My first problem is that during the last 3 months, the capacity is down to 45,88 Wh and I can't really understand why. This can be a generic problem with the battery?

  My second problem is - for which I found another topic here, but it did not help me - that when I charge the battery, stops at 99% of load, showing "3 minutes is remaining" and if I disconnect and reconnect the adapter, it stops like 99% saying have completely loaded. In the battery maintenance, I changed the settings to "always fully charge' Custom, but still, it won't charge the battery fully.

  

  My third problem is that I have updated the BIOS of my laptop a few days ago, and when I try to search for an update of the firmware battery or when I do a battery meter reset, the system shuts down suddenly without any warning or something else.

  I would be really grateful if someone could help me with this, I like really my laptop but it really bothers me...

  Thanks in advance.

  (1) so that you must have used it a bit and then, under the charge cycle is at 234.

  (2) don't know, but sometimes my battery the fact.

  (3) download HWinfo32 and check your system temp, and what temperature your CPU is.

• ThinkPad Edge 15 webcam problem/off button

  Hello!
  I have Lenovo Thinkpad Edge 15 and I have a little problem with that.

  ThinkPad edge 15 has all sorts of buttons on the keyboard. As the volume, mute speaker buttons button etc.

  The problem is that there is a button to turn off/turn on Webcam it (marked with yellow box in the picture), but its no longer works. Whenever I push, nothing happens (instead, it shows me with this ring mouse cursor). It should show me that the camera is in power. For example, it shows me my microphone turned off.      Like this:

  All solutions?

  Link to photo

  

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  NVM

  got, it works now

• ThinkPad Edge 15 Wifi problem

  Hello everyone. I have a Lenovo Thinkpad edge 15 0302a 16.
  I have a problem enormous conectivity. After installing recommended drivers, I had the F9 key to show me the Wifi tricks in windows 7. Yet, I still can't conect to wifi. Device Manager still does not register my wifi adapter, and I already spent 7 hours dealing with this thing. So I installed Ubuntu and now my computer connecting to the wireless network, no probs.

  I still want to be able to conect to windows 7, because I want to be able to use some programs that are not compatible with linux.

  Can anyone give a solution for this?

  Thanks for your time

  Little Grüße

  German

  Finally, I did it! I did a forlder with all the drivers and installed all the new!
  Now I have WIFI on windows 7! Thank you!

• Chrome loading problems

  Hello

  My site has issued strange things in Chrome since my last update.

  It does not correctly load the effects of parallax.

  See what it looks like here.

  
  

  Dropbox - VID-20150728 - WA0000.mp4

  I can't get t reproduce all the time. Works sometimes and sometimes not.

  I know it's a very great homepage but it would still not explain why its ok sometimes and not other times. And even if you let it load the entire page, he still has questions.

  There has never been a problem before the hand even with the same size.

  I have the version more on day of muse installed as well.

  Any help would be great

  Al13.com

  Thank you!

  Hello gatringer,

  I checked the site on my computer using Google chrome and as you mentioned "cannot get it reproduce all the time." ' Works sometimes and sometimes not. I tried to run it 10 times and his behavior absolutely fine every time.

  Now, why is he behaving badly on your google chrome but good on other browsers.

  (1) it may be some kind of plugin doing the performance of your browser.

  (2) it may be another software (anti virus... etc) making the performance of the browser.

  What should do?

  (1) clear the browser's cache.

  (2) to reset the browser to default settings.

  (3) make sure that the browser is up-to-date.

  (4) turn off the plug which are not in use or try to disable everything, if you have an option to reinstall them.

  (5) if the problem persists, try to turn the anti-virus, firewall or all these software for some time to test the behavior.

  Please try the above and share the behavior of the browser.

  Kind regards

  Nitin

• Bizzare vShield Edge-NAT/VPN problem Post - 5.1 upgrade

  Hoping someone can shed some light on this issue for us - the TLDR is that NAT rules seem to be causing unexpected behavior on the VPN traffic after a vCloud 1.5 to 5.1 upgrade.

  Background: We work with a hosting provider to manage our vCloud environment. Quite simple - 2 ESXi hosts, a few NFS data stores. They have recently updated us of 1.5 and 5.1. For most of our committees, we have just one network of vSE/Routed that connects a subnet to a network of "WAN" and pulls a public IP address from a pool. Send us (NAT network address) and leave (firewall) ports (for example port 3389 for RDP) to the virtual machines selected. Most of these networks also have a VPN tunnel from site to site with a physical Firewall through the internet. After the upgrade, we went and converted our rules to match the period of initial and active INVESTIGATION "multiple interfaces" - effectively subtracts to compatibility mode. Everything was going well (even for devices of vSE always in compatibility mode)

  Question: We first noticed this, when a customer reported that they are unable to access a virtual machine via RDP using it is internal (protected VSE) IP through a VPN tunnel but could access the virtual machine via RDP using its public hostname/IP address. Allow us all traffic between the VPN (firewall has a whole: a rule for VPN traffic). When we connected to troubleshoot (just thinking that the VPN was down), we found that we could connect to any port on the computer through the VPN tunnel except 3389remote virtual. I can ping from the local subnet to the VM troubled on the VAPP network without problem. I was able to connect to other ports that have been opened on the remote virtual machine without problem. I couldn't connect to 3389 through the VPN.

  We thought he could be isolated, but found the question on each VSE we have: If there were a the DNAT rule to translate the inbound for a particular port, this port would be insensitive when traffic through the VPN tunnel that is meant to be the target of the DNAT rule.

  Someone has an idea what could be the cause?

  Looks like it is a problem experienced during the upgrade. These hidden firewall rules will not disappear until the firewall configuration is updated in some way. So go as - upgrade

  (1) upgrade VCD

  (2) update VSM

  (3) to redeploy the entry door to upgrade the edge of the gateway to version 5.1

  (4) convert the firewall rules to the new format (where firewall rules have no management interface or traffic)

  (5) to change the properties of the bridge and the multiple interface mode

  (6) change the specification of the firewall somehow, that is to add a dummy firewall and remove it, turn off, then turn on the firewall, etc..

  Which should cause the deny rule go away

• Edge 2014.01 problem with cutting

  NEED HELP... Please

  Open an old file of 2014 that she informed me was upgraded to the new version.

  Now the banner doesn't seem to work.

  After the first loop, the clipped svg files remain on the screen, and you end up with a clash of images.

  It's not freezing as if it freezes on the screen and everything works loop again under the screen.

  Help please this banner was working properly yesterday and today, not after the update.

  If you need I can provide files, old and upgrade.

  Thank you

  Hello

  There is a bug in the new version of the edge.

  Is this problem just for the cut, when you replay the animation values for the clip is not reset when the animation begins again from t = 0. It keeps the values clip with an element when the animation ends.

  Two solution:

  1. you must manually set the values of clip at t = 0, so that when the animation re-read it forced to take the new values.

  2. at the end of the timeline, where you have added sym.play(1000) (), reset here all this clip of the elements value, such as

  SYM. $("Snuffy") .css ({'clip': 'rect (24 PX, 48px, 95px: 21px)'}); for item Snuffy

  do the same for the other items

  Kind regards

  Vivekuma

• Adobe with Chrom website problems

  Hi the first time here on the Adobe forums.

  So just say ' does not work this website using Chrome. If someone else found this?

  I have to use IE tab extension to follow all the links, the only way to navigate under full Chrome is to right click and open in a new tab or window.

  It would be nice to solve this problem.

  Chrome version: 22.0.1229.94 m

  Yes chromium is a problem (a 22.0.1229.94 Version m) cannot join a photo but a video can't (guess because it uses a URL)... Lightroom, Photoshop forums too.