Edge DMP 340 in the sleep or soft mode

Similar Questions

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• Sleep and extended modes disappeared!

  Hello! All of a sudden, the sleep and hibernation modes have disappeared: the options are then to stop, but they can not be selected. In addition, the "sleep mode" does not activate when I close the lid of the computer (even though I already checked in the options it is supposed to do). I hope someone can help with this!

  @jessnoun...

  Found this...

  "Vgasave is that Windows uses when the graphics driver is not present or does not work, or in Safe Mode." Go to the Device Manager and check the status of your graphics card and also check hard goods that could conflict with display usually under 'other devices' or 'Unknown devices' if present. Remember that you have the latest driver from the manufacturer's support Web site. »

  Source-> http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/vgasave-is-killing-me/2fe723...

  Try it...

• How to fix Windows 7 64 bit freezes on the sleep/hibernate?

  My computer freezes constantly just before the sleep/hibernate or just after waking you. I had this experience with SP1 and without. Before you remove SP1, the HD will start to charge about 17 minutes to leave inactive. Almost exact to the minute, it will crash after 25 minutes to leave inactive.

  After removing the SP1, the system will NOT crash before going to sleep. However, it will crash as soon as you wake up. Below is summary dumps of two representative falls.

  032011-28688 - 01.dmp 20/03/2011 16:45:38 (after SP1 has been deleted)
  PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
  fffff981'0 c 002690
  00000000 00000000'
  fffff880'0143f4e0
  00000000'00000005
  NTFS.sys Ntfs.sys + c9836

  26317 031911 - 01.dmp 19/03/2011-21:20:34 (before SP1 was removed)
  PAGE_FAULT_IN_NONPAGED_AREA 0 X 00000050
  fffff981'13 has 02690
  00000000 00000000'
  fffff880'01239460
  00000000'00000005
  NTFS.sys Ntfs.sys + c47b6

  As a backdrop, the system:
  HP Pavilion Elite m9400t
  Intel Core 2 Quad Q6700 @2.66 Ghz
  6 GB DDR2 2400 (Micron Tech and Hynix Semiconductors)
  ATI Radeon HD 3650
  750 GB HD Samsung HD753LJ
  OEM: Vista Ultimate x 64
  Current (academic): Win7 Professional 64-bit
  H/w bought November 2008
  Operating system: any new installation

  Programs:
  In addition to Windows, I just installed Office, Chrome, Firefox. I have installed but removed ScanSnap of UBWALL scanning software, Windows Live, Windows Security Essentials

  Devices:
  No devices are attached

  Tests already performed:
  Memory tests (memtest86, memtest86 +, WIndows)-no error
  Chkdsk/f/r (twice) - no error

  I'd appreciate any help. Thank you.

  Updated - I deleted Windows 7 Pro and re-installed Vista Ultimate OEM. It works perfectly. This excludes any possibility of h/w issue.

  I think to re - install Win 7 Pro and see if the error. Any ideas/suggestions?

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

• End of 2015 iMac 27 inches 5K screen lights up when the "sleep mode"

  When the iMac is in "standby", sometimes the display lights for a while and then turns back off the coast. Screen does not completely, simply turn the backlight (it's like when you see a black image with the high brightness level).

  I know the iMac turns once in while when the "sleep mode" to access the internet and such things, but I don't like the screen turn on like that.

  Is there a question?

  Thank you for your collaboration.

  Probably not a problem, but to be sure that you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• When to use the sleep/wake button?

  I'm a little confused on how to better close my 5th generation iPod touch - IOS 9.3.2 - when I finished a session.

  I must:

  1. Let the power down on its own?
  2. Turn off with the sleep button sleep?

  What is "best practice"?

  Thank you!

  Dan

  Whichever you prefer. They both make the same except if you give the key a long wait, then slide to turn off.

  TT2

• can not find the sleep settings screen on ubuntu 11.10

  can not find the sleep settings screen in ubuntu 11.10

  http://UbuntuForums.org/

• With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  (It sleeps)

• How can I turn off the sleep mode in Apple Watch the temporary?

  Guys,

  My wife is studied for his chiropractic studies and tried to use Apple Watch as a timer so that it checks the patient's pulse, but she is unable to use the watch due to the sleep mode. Plu wake screen is 70 seconds as described in settings. Is it possible that it can disable temporary screen wake up so she's doing the pulse testing?

  Justin

  Version: Watch OS 2.1

  Hi Justin

  It is not currently possible to disable the sleep of the Configuration screen. The longest time that the screen can stay awake without further interaction is 70 seconds (subject to activating first the setting you describe).

• X 1 yoga 2016 Depot repair service or request replacement? do not leave the sleep, beep

  I am an owner of a 220 X 5 years which is still running strong.

  I wanted something more bigger and lighter. I ordered 2015 model X 1 (non-yoga)... it was a bad screen FHD (blurry text, get FHD rather get the QHD) and had problems at the end of sleep. Lenovo sent me a replacement, had the same problems, I sent both back. No problem with the return of the process, very easy and free because they were defective.

  Now, I ordered a 2016 X 1 Yoga because I want to be great and show my touch 360 degrees swivel screen of pretty girls in my class. The QHD screen is amazing, looks like a macbook pro retina display. I close the lid or put the laptop in standby mode, open the lid, it lights up with black screen and beeps 4 beeps three times (each time that I SLEEP there). I have to manually hold power button to restart the laptop. Nice! Also, sometimes the display driver hangs and gives a prompt telling me it crashed. Another thing is that, sometimes, when I put it in Tablet and back in portable mode, mode considers its still in tablet mode. Other issues, I noticed in the day to use it... no idea what else is yet to come lol... the laptop is so so so awesome, for real numbers.

  That said, should I send in Lenovo Depot repairs or get a replacement? I read bad reviews about the Service on this forum. At the same time, I don't want Lenovo to send me another faulty laptop, as was my experience with my X 1 (non-yoga).

  What should I do?

  Lenovo has released a version of BIOS, v1.10, which resolves failures to exit the mode standby 1 Yoga X and X 1 carbon 2016 (types of Machine: 20FB, 20 CF).

  Version 1.10

  [Problem resolves]

  -Fixed an issue where the computer cannot find a normal sleep

  State because of the incompatible BIOS setting of the security chip.

  It can be downloaded here: http://support.lenovo.com/us/en/downloads/DS111756

  Thank you

• LabVIEW version of the source code of the NOR-DCPower Soft Front Panel

  I work with an SMU NI PXI-4130. There is a front panel soft exe called the "NOR-DCPower Soft Front Panel" that can be used to control the instrument. I was wondering if there is a version of LabVIEW source code for this driver?

  Jim,

  as much as I know there is no LV source code provided for the Soft Front Panel. But there are a few examples of LV, which will be close to the characteristics of the SFP. So I suggest to you to dig in the examples you find in the Finder of the example.

  Input and output hardware > Modular Instruments > NI-DCPower.

  hope this helps,

  Norbert

• Test WEC7 CTK: compare all three timers Drift - busy sleep and the sleep of the BONE

  Hello

  I faced a question about WEC7 when run CTK test: compare three timers Drift - busy to sleep and the sleep of the OS. Error like below:

  Compare all three timers Drift - busy sleep and the sleep of the OS: * ERROR * too drift between GetTickCount and Hi Performance.
  Compare all three timers Drift - busy sleep and the sleep of the OS: * ERROR * GetTickCount is 120001 tick.
  Compare all three timers Drift - busy sleep and the sleep of the OS: * ERROR * Hi Performance should be between 120000 and 120003 inclusive ticks. Instead, it's at 120401. These figures are using GetTickCount units.
  Compare all three timers Drift - busy sleep and the sleep of the OS: * ERROR * too drift between Hi Performance and time of day (RTC).
  Compare all three timers Drift - busy sleep and the sleep of the OS: * ERROR * Hi Performance is to 229966072999 ticks.
  Compare all three timers Drift - busy sleep and the sleep of the OS: * ERROR * time of day (CCF) should be between 229964000000 and 229969730000 inclusive ticks. Instead, it's at 229201910000. These figures are using Hi Performance

  I used August 2014 WEC7 release build. Es that it is known issue on WEC7?

  However, I can get all spent with the same platform configuration in WEC2013. Can someone give me some advice?

  
  

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  
  

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

  ft.com/Forums/en-us/home

• When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time. What can I do?

  When I wake up the computer in "sleep" or "hibernate" mode, only the photo Office rises, not the icons, so I have to restart with a hard off every time.  What can I do?

  Press CTRL + ALT + DELETE and bring up the Task Manager > move in process > select Explorer > end task and it will restart and if all goes well it will bring to the top of your screen properly.

  Your computer is completely up-to-date with all the updates?

  Note I'm not a fan of setting hibernation or sleep a computer there, it can sometimes lead to problems (as you see)

  I hope this helps.