Edit the existing script.

Similar Questions

• I need to edit the existing customer's site, I only have their login information and new photos.

  I need to edit the existing customer's site, I only have their login information and new photos. I can't change it with the editor in the browser as it was exported by using an older version of muse and I have not all the other files of the Web site. Help, please.

  In this case, you will need to ask the client to share the muse file and have the same updated file, and then publish on the customer site. When you are added as an administrator, you will see the option site > site list.

• The HTML output to the existing script maps help

  I found a script that had a lot of things that I needed. I have since deleted stuff we didn't need and added some other stuff that we need. The result is good, but now I want to turn this into a page in HTML and it gets an error. Any help would be greatly appreciated. I'm pretty good with PowerShell to be somewhat dangerous with things.

  $Cluster = 'CLUS-1'
  $ClusterName = Get-Cluster $Cluster
  $Datastores = $ClusterName | Get-Datastore | Where {$_.Name -notlike '*LOCAL'  -and $_.Name -notlike 'VM_Datastore*' -and $_.Name -notlike 'Templates' -and $_.Name -notlike 'ISO' -and $_.Name -notlike '*SCRATCH*' -and $_.Name -notlike 'Archive'}
  $Clusters = Get-View -ViewType ComputeResource | Where {$_.Name -like $ClusterName.Name}
  
  $Clusters | % {
  $Cluste                      = $_
  $VMHostsView                 = $null
  $VMHostsView                 = Get-View $Cluste.Host -Property Name, Hardware, Config
  $VMss                        = $ClusterName | Get-VM
  $HostCount                   = ($VMHostsView | Measure-Object).Count
  $VMCount                     = 0 + ($VMss | Measure-Object).Count
  $VMsPerHost                  = [Math]::Round(($VMCount/$HostCount), 1)
  $vCPU                        = 0 + ($VMss | Measure-Object -Sum -Property NumCPU).Sum
  $allocatedram                = 0 + ($VMss | Measure-Object -Sum -Property MemoryGB).Sum
  $avgrampervm                 = [Math]::Round(($allocatedram/$VMCount), 1)
  $pCPUSocket                  = ($VMHostsView | % { $_.Hardware.CPUInfo.NumCpuPackages } | Measure-Object -Sum).Sum
  $TpCPUSocket                += $pCPUSocket
  $pCPUCore                    = ($VMHostsView | % { $_.Hardware.CPUInfo.NumCpuCores } | Measure-Object -Sum).Sum
  $vCPUPerpCPUCore             = [Math]::Round(($vCPU/$pCPUCore), 1)
  $TotalClusterRAMGB           = [Math]::Round((Get-Cluster $Cluster | Get-VMHost | % { $_ } | Measure-Object -Property MemoryTotalGB -Sum).Sum)
  $TotalClusterRAMusageGB      = [Math]::Round((Get-Cluster $Cluster | Get-VMHost | % { $_ } | Measure-Object -Property MemoryUsageGB -Sum).Sum)
  $TotalClusterRAMUsagePercent = [Math]::Round(($TotalClusterRAMusageGB/$TotalClusterRAMGB)*100)
  $TotalClusterRAMFreeGB       = [Math]::Round(($TotalClusterRAMGB-$TotalClusterRAMUsageGB))
  $TotalClusterRAMReservedGB   = [Math]::Round(($TotalClusterRAMGB/100)*15)
  $TotalClusterRAMAvailable    = [Math]::Round(($TotalClusterRAMFreeGB-$TotalClusterRAMReservedGB))
  $newvmcountram               = [Math]::Round(($TotalClusterRAMAvailable/$avgrampervm))
  $DSCount                     = 0 + ($datastores | Measure-Object).Count
  $TotalDSCapacityGB           = 0 + [Math]::Round((($datastores | Measure-Object -Sum -Property CapacityGB).Sum), 0)
  $TotalDSFreeGB               = 0 + [Math]::Round((($datastores | Measure-Object -Sum -Property FreespaceGB).Sum), 0)
  $TotalDSUsedGB               = [Math]::Round(($TotalDSCapacityGB - $TotalDSFreeGB),0)
  $allocatedstorage            = 0 + ($VMss | Measure-Object -Sum -Property ProvisionedSpaceGB).Sum
  $avgstoragepervm             = [Math]::Round(($allocatedstorage/$VMCount), 1)
  $newvmcountstorage           = [Math]::Round(($TotalDSFreeGB/$avgstoragepervm))
  
  New-Object PSObject |
  Add-Member -Pass NoteProperty "Cluster Name" $ClusterName.Name |
  Add-Member -Pass NoteProperty "Cluster - Host Count" $HostCount |
  Add-Member -Pass NoteProperty "Cluster - VM Count" $VMCount |
  Add-Member -Pass NoteProperty "Cluster - VM per Host" $VMsPerHost |
  Add-Member -Pass NoteProperty "Compute - Number of pCPU" $TpCPUSocket |
  Add-Member -Pass NoteProperty "Compute - pCPU per Core" $pCPUCore |
  Add-Member -Pass NoteProperty "Compute - Number of vCPU" $VCPU |
  Add-Member -Pass NoteProperty "Compute - vCPU per pCore" $vcpuperpcpucore |
  Add-Member -Pass NoteProperty "Compute - Total Memory (GB)" $TotalClusterRAMGB |
  Add-Member -Pass NoteProperty "Compute - Total Memory Used (%)" $TotalClusterRAMUsagePercent |
  Add-Member -Pass NoteProperty "Compute - Total Memory Used (GB)" $TotalClusterRAMusageGB |
  Add-Member -Pass NoteProperty "Compute - Total Memory Free (GB)" $TotalClusterRAMfreeGB |
  Add-Member -Pass NoteProperty "Compute - Total Memory Allocated (GB)" $TotalClusterRAMReservedGB |
  Add-Member -Pass NoteProperty "Compute - RAM Available for NEW VMs (GB)" $TotalClusterRAMAvailable |
  Add-Member -Pass NoteProperty "Compute - Average RAM allocated per VM" $avgrampervm |
  Add-Member -Pass NoteProperty "Compute - Remaining VMs based on available RAM" $newvmcountram |
  Add-Member -Pass NoteProperty "Storage - Datastore Count" $DSCount |
  Add-Member -Pass NoteProperty "Storage - Total Datastore Capacity (GB)" $TotalDSCapacityGB |
  Add-Member -Pass NoteProperty "Storage - Total Datastore Free (GB)" $TotalDSFreeGB |
  Add-Member -Pass NoteProperty "Storage - Total Datastore Used (GB)" $TotalDSUsedGB |
  Add-Member -Pass NoteProperty "Storage - Average storage allocated per VM" $avgstoragepervm |
  
  
  Add-Member -Pass NoteProperty "Compute - Remaining VMs based on available storage" $newvmcountstorage
  }
  

  {on the last line of the script after} add below line

  | ConvertTo-Html | Out-file c:\log.html

• help strengthen the existing script maps

  So I tried initially comes to loop through all the files but could not understand so I made sure that I could pass the file as a parameter, but ideally, I want it to all virtual machines without having to enter all the settings. Any ideas on the best way to do this? I want to the csv files for each folder with all the attributes that are customized for each virtual machine contained in.

  ##Variables

  Param ($param1)

  $report = @)

  $folders = get-file $Param1 # | name sort

  ############################################################################################

  ###########################

  ForEach ($folder in $folders)

  {

  $vms = get-vm-location $folder

  ForEach ($vm to $vms)

  {

  $ReportObj = "" | Select "File", "Virtual Machine", "POC", "Username", "Password",

  $ReportObj. "" Folder "= $folder.name

  $ReportObj. "' Virtual Machine ' = $vm.name

  $ReportObj. "' POC ' = $vm. CustomFields

  $ReportObj. "' Username ' = $vm. CustomFields

  $ReportObj. "' Password ' = $vm. CustomFields

  $Report += $ReportObj

  $csvfile = "D:\". "$folder".csv ".

  $report | Export-CSV $csvfile - NoTypeInformation

  }

  }

  The Get-FolderPath filter returns anything you put in the $row.

  Then if you add additional properties, they will be in the CSV files.

  For example, the following version adds the Notes property and all of the custom attributes

  filter Get-FolderPath {
       $vmImpl = $_
       $_ | Get-View | % {
            $row = "" | select Name, Path, Notes
            $row.Name = $_.Name
  
            $current = Get-View $_.Parent
            $path = ""
            do {
                 $parent = $current
                 if($parent.Name -ne "vm"){$path = $parent.Name + "\" + $path}
                 $current = Get-View $current.Parent
            } while ($current.Parent -ne $null)
            $row.Path = $path
            $row.Notes = $vmImpl.Description
            $vmImpl.CustomFields.GetEnumerator() | %{
                 $row | Add-Member -Name $_.Key -Value $_.Value -MemberType NoteProperty
            }
            $row
       }
  }
  
  Get-VM | Get-FolderPath | Group-Object -Property Path | %{$_.Group | Export-Csv ("C:\" + ($_.Name.TrimEnd("\")).Replace("\","-") + ".csv")}
  

  This version also solves the problem with the file name of the CSV files which was leaking.

• cannot addon, can't edit the necessary files; XP and no only installed script

  Have windows XP sp3 and latest firefox, did install no script but cannot install any other addon. Error - Cannot install, not able to edit the necessary files. This allows Java, allowing other addons does not help.
  Unable to create a new profile that the procedures given do not work.
  Allowing all global scripts does not help.

  Thanks for help

  Michal

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• My 'Contacts' crashes all the time, in general, when you edit an existing contact. Ideas? 10.11.5 El Capitan latest

  My 'Contacts' crashes all the time, in general, when you edit an existing contact. Ideas? 10.11.5 El Capitan latest

  Quit the application contacts.

  In the Finder, select go > then go to the folder and paste and click go:

  ~/Library/preferences/com. Apple.addressbook.plist

  A Finder window opens at this location and file. Move the com.apple.AddressBook.plist file to the trash. Restart the Contacts and see if that clears the problem. If so, you can empty the trash.

• How to edit an existing esign form that is inside a widget?  I need to change the form, but keep the widget.

  How to edit an existing esign form that is inside a widget?  I need to change the form, but keep the widget.

  Hello Damien,.

  If you talk about form fields in the Widget, then Yes, you can change them by going to the tab manage and click Edit opposite the name of the Widget under the Widgets section.

  Kind regards

  -Usman

• Integration of VCAC of existing scripts of VCENTER in "Manager of customization in the VCENTER client specifications.

  I have existing templates that I use to create plans, now I have not found the client is wanting to use the custom scripts that exist in the VCenter-> Home-> "customization specifications Manager.

  How can I incorporate these scripts in the VCAC action plan?

  ' Copy the name of the specification of the personalization of vCenter and paste in ' Cutomization Spec ' on the tab 'Build '.

• I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?

  Hello

  You must define a site in Dreamweaver and need to set up your FTP server. One for that, you can connect with the FTP server where your FrontPage is loaded and you can get the copy of the said locally.

  Link below explains how.

  Define a Site in DW

  Define a site in Dreamweaver. Adobe Dreamweaver CC tutorials

  https://www.YouTube.com/watch?v=sHAvSbdRgu8

  Connection to the FTP server

  https://helpx.Adobe.com/Dreamweaver/using/connect-remote-server.html

  Using Dreamweaver | Edit an existing remote Web site

  Concerning

  Vivek

• Cannot change the numbers/figures in the English script, his editing in Arabic script

  Whenever I edit numbers/figures, cannot be changed in the English script. Always his Arabic script showing.

  Open the Document.

  Click the Edit-> Preferences menu.

  In the left pane, select language.

  Uncheck the "Hindi Digits".

  We know if that solves your problem.

• The code in the script jsx to editing the objects of value

  The software company where I work runs a .jsx script to set all preferences in InDesign.

  InDesign CS 5.5 has an option under general for the modification of named objects prevent the selection of locked objects.

  We need to have this turned off whenever a user creates a new document.

  Some allow the code on what we can add to our existing script? Thank you.

  Phew! You are serious about your preferences. You need to insert a new one in the with block that starts at line 154:

  //General preference panel
  with(app.generalPreferences){
      pageNumbering = PageNumberingOptions.section;    // Page Numbering, View
      toolTips = ToolTipOptions.normal;                    // Tool Tips
  //    toolsPalette = ToolsPaletteOptions.doubleColumn;    // Floating Tool Palette
      completeFontDownloadGlyphLimit = 2000;                // Always Subset Fonts...
      preventSelectingLockedItems = false;
  }
  

• To group the existing objects by using script API?

  Am I missing something, or is at - it no way to group the existing objects using the api script? You can add GroupItems (), but that does not help you with existing objects.

  You have probably not to duplicate the element, which is just how the examples have been written.

  Looking at the code, try to change this:

  newItem = docSelection [i] .duplicate ();

  newItem.moveToBeginning (newGroup)

  to do this:

  docSelection [i] .moveToBeginning (newGroup)

• XML and the PowerCLI Scripting Edition

  Good then I am using PowerCLI to do Automation more boring tasks that need to be repeated. But now I'm stuck because I do not understand how to enter commands in the window PowerCLI and creating XML scripts that are called by a manually scheduled task.

  Is there training there or good articles on how to go to the manual entry of orders from command line and in scripts development of really?

  Any information would be greatly appreciated.

  See you soon,.

  Paul

  I assume you are talking about PowerShell scripts and not the XML scripts?

  You can find a good intro to PowerShell scripts in Chapter 10 of free PowerShell ebookTobias.

• Data Modeler: generate the Delta Scripts against an existing schema

  Can I generate the DDL Scripts with 'ALTER TABLE' - statements?
  
  For example: relational model and the database are synchronized. That means: each Table of the db is stored in the data model of the Data Modeler.
  
  Now I need new columns in a table. I have set these columns in the data model and now I need a script with:
  
  ALTER TABLE my_table ADD (new_column DATE);
  
  In the Oracle Designer, it is easier to create such delta-scripts. But I can't find anything similar in the Data Modeler
  
  Thanks in advance
  Gerd

  Hi Gerd,

  We called the "Swap target model" at the last page of the wizard 'import data dictionary' check box. If you select your database will target the model and you can get ALTER statements in the DDL of the Merge dialog preview. It's the same thing with the DDL script.

  Philippe

• How to disable the existing fields to highlight

  Hello

  I make a PDF with radio buttons, with a background image, and when I view the PDF in Acrobat X Pro it seems fine. I turned off to highlight the existing fields in the menu form. But when I open the document on another computer, large gray boxes appear around the buttons radio Acrobat Connect automatically highlight the existing fields?

  How to export the PDF file as well as on other computers do not appear the gray boxes?

  Thanks a lot for your help!

  Fabian

  It is a setting of the application, not the document.

  You can disable it by going to Edit -. - form and tick 'display '.

  "flight hover border for the fields.

  It is also possible to turn off this setting using a script, but I would

  not recommended to do this because it would not affect only your file but

  all files open on the computer of the user. If you want to implement

  You should at least inform the user of the change, and preferably get their

  confirmation to do.