Editing GoPro footage in Final cut pro 7

Similar Questions

• Premiere Pro CS6 - Multicam is BROKEN! vs FCPX, FCP7 (Final Cut Pro), Avid, Sony Vegas

  If you plan to spend in FCP7, FCPX, Avid or another edition of Premiere Pro CS6 program, there are SEVERAL good reasons to do so, HOWEVER, if you deal with the edition of several cameras (multicam) so you think twice, until this problem is resolved.

  How to edit in Adobe Premiere Pro CS6 multicam? What is the best program editing for mulitcam or multiple camera editing? - The answer, as long as the question below is fixed, isn't Adobe Premiere Pro! From CS6 (version 6.0.2), this lack of 'design' or the 'weirdness' described below, multicam editing is very difficult and inefficient in Premiere Pro. These first two issues above are what I searched Google in hopes of a solution to a problem plaguing Adobe Premiere Pro for years, literally. Unfortunately, in the new Premiere CS6, with so many other great innovations, the question remains still makes it very difficult to do an editing multicam compared to Final Cut Pro 7, Avid, Sony Vegas, FCPX, etc.. They all handle editing multicamera in different ways but, having recently passed away from FCP7, and has worked on several modifications mulitcam, Premiere Pro CS6 (and CS5 and CS5.5) has serious problems with the multicam function that is broken right now (version 6.0.2) in first CS6 and fact editing multicam VERY frustrating experience and a lot less effective compared to the other NLE. If it's a drawing, then its imperfect as Yes, you can work around it and difficulty about what you did, but why so you have to keep wasting time precious 'fixing' in such things? All is not supposed.

  
  

  The question:

  Hit the button of the SPACEBAR or pause or stop during a multicam editing actually stop the edit, made a cut in your timeline (chronology) and then will be another camera (angle or shot), if you want only it or not!

  This issue was known by Adobe for more than two years, but they push aside, call a quirk of design and ultimately avoid such question stated in this thread of attachment: http://forums.Adobe.com/thread/738084?start=0 & tstart = 0

  Make cuts and put the angles on you when you simply to pause or stop playback is a huge problem of having your editing program. If this were happening in the normal timeline, so I'm guessing it would have been fixed, but it has not been fixed and it causes the editor to have to go back and remove unintended cuts and back shots where they should be. The PAUSE button should only SUSPEND or STOP playback, as it does in other programs. But in the first he stops, make a cut in your timeline and then switches to the first angle or shot you started with if you want or not. There is no way to prevent this at the moment on CS6. The other thread that talks about the question refers to the fact that the "question doesn't have the numbers" to make it a priority to be fixed and there are other "larger issues" that need to be corrected first, which makes me wonder if Adobe really listen to the comments of the user. I mean, 2 years, people complain about that and not of miracle. Their response was 'add to wish list' or ' this isn't a bug, it's a quirk, then do an requested feature"or"its designed that way." Designed like that? Who would really want it like that? No other NLE does this and for good reason. If the pause button pause just reading and that's it, do you think there would be a thread for a period of 2 years on how to hit pause "should also make an incision in the timeline and move from the shots? I doubt it. Its a defaultdesign. I feel strange asking the feature 'Please take the pause break button' or 'Please make the stop button to stop playback. Looks like its brokenness, to me.

  If the robot multicam is a major objective for the team Adobe Premiere, go ahead, which I think it is, then please start by making even the basic works work as one would expect to BREAK = PAUSE. STOP = STOP. Phew! It was difficult. Fact. Fixed. Travel! Currently, this design is counterproductive, not intuitive, helps no one and only lost valuable time while the Publisher must quickly "solve" the problem.
  

  Well, I thought I'd do two things here:

  (1) start a thread with as many keywords as possible so that this "numbers" question in this forum and in Google searches. I hope that soon when you google 'First multicam Pro' this will be the first topic on the first page. My hope is that I can put a nice 'RESOLVED' or 'FIXED' label on this thread, one day next (and I'll for sure!). If this is the case, it is a testament to the theory of wheel ran combined with a small web analytics.

  (2) do this a new thread, rather than continue in the old thread because it is time to ask a new question: how long will it take for Adobe a problem when its design is essentially broken causing users to have to do a 'fix' every time? At the moment it happens two years! This isn't a feature request... his service broken in the first. A drawing... necessary. I can't listen to Adobe and they care about certain things, but how fast they act? This is my real question.

  I wonder if this thread has more "we have more important things to fix" or "is not that big of a problem" or "this isn't a problem at all, it's an oddity" or "you can just go back and correct the problem, whenever you have to stop because it takes only a few seconds' or 'its not broken its designed to be counter-productive and frustrating for users.  Time will tell. Well, if you do mulitcam changes as much as I do then these "seconds" are added. It is designed this way, and then Adobe, I ask you this question: If you hit pause on your TV remote button, and he stopped at the TV live, but also turned the volume all the way down and changed the channels... always so would you call that a quirk? It would be wise to design a remote control like that? I would say the key on your remote control does not work well and should be fixed. Yes, you could address it quickly by pressing the button "last" or "reminder" and then hit the volume up button, but shouldn't the key BREAK of your remote did exactly cela and only that: BREAK?

  Please respond... to apparently numbers.
  

  Have you tried what a user suggested earlier in the thread? Although it takes a little getting used to, it works for me perfectly.

  "Before to stop playback, press the 0 (zero) on the keyboard and then you can stop the game (with the SPACEBAR) without cutting in the timeline."

• Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6) I need to know if I transfer my final cut information in the time line, he transferred to another computer?

  Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6)

  If I buy a newer computer (macbook)... with a NEW version of final cut... If I transfer all my info from my hard drive to the new computer, and if this newer computer has a new version of final cut pro, it will always show my "timeline" I have... to remember all my files?

  If not... If I buy the same old version of final cut (6.0.6) and any transfer to another computer, my files will appear exactly as they did when I just changed my project?

  Thank you for your help, if you need more information to answer this question correctly, please ask.

  JO

  I asked that your post be moved to:

  Final Cut Pro X

• Can I capture with Final Cut Pro and edit in Premiere Pro?

  Because it appears first has problems with capture - at least for me, but as I see it for others as well - and I can capture with iMovie, I take it with Final Cut Pro for capture - cross for Adobe Premiere and the suite for editing, then finalized? Or is it a problem to copy the photos/files from one program to the other (they would be clearly identified if I could just import first shots later?)

  Thank you

  Rob

  Hi Rob,

  When you are capturing HDV into FCP, it creates a specific Apple HDV codec. It is a codec that is not available unless the FCC, movement or compressor is installed.

  Two solutions of workaround would be to use Premiere Pro on Mac with above mentioned applications on the same system or convert a codec which can be read in first.

  Best,

  Peter Garaway

  Adobe

  First pro

• My teenage daughter and I have different IDS from Apple, but I want to share my Final Cut Pro software, we can edit our videos for YouTube. Have I'm going to do this?

  final cut pro in the House of sharing.

  AAre you using the same computer? Or she has a separate computer to which it belongs?

• Video is lagging / choppy on Final Cut Pro reading but the audio is perfect

  Hello

  So I am using FCP for 2 weeks or more and I have been editing videos without problem but today something super odd happened. After editing as I like, I saw the video and it's suuuuuper laggy/choppy but the sound was perfect (in quality and timing). When I stop the video for a few seconds, although the video can be synchronized back but then return to be lag after a few seconds. I tried exporting it in the hope that maybe once it has exported it's going to work, but not luck. The entire video is not even to export. The video is about 4 minutes would export long and only 01:30. I am really confused and frustrated and hope someone can help!

  Also, I imported the original footage on an external hard drive if my computer would have more space. Not sure if that makes a difference, but I thought I should add that just in case.

  Thank you very much!

  Cristina

  MacBook Pro OS X El Capitan 10.11.3 Version

  Processor: 2.4 GHz Intel Core 2 Duo

  Memory: 4 GB 1067 MHz DDR3

  Final Cut Pro: 10.2.2

  Theres not enough info here to diagnose the problem. The issue started when you copied data to another drive? In general, you want the media on a single disc and the application on another.

  Maybe car ram speed, maybe, I don't know what the requirements of the FCP are but check here:

  http://www.Apple.com/Final-Cut-Pro/specs/

• Cannot open the project on final cut pro :(

  Hey guys, I have a big problem.
  I edited a video which is about 1h30m and using the function "Multicam clip", and successfully made and made a DVD. but unfortunately I need the second edition. Then I opened the library file, click the project, Final Cut Pro X continuous loading and close unexpectedly, and another project to another event works normally. anyone with the same problem? I need to send it to my tmr customer

  p.s. I deleted the file, preferably according to most of the Q & A.

  What version of FCP are you running? If it's the 10.1 or later, projects are in the events that are contained in libraries.

  If 10.1 or later, is the DVD project that does not open in the same library as the project is open? Or they in different libraries

  Russ

• Final cut pro works only with iCloud music

  I have Final cut pro 10.2.3 sound only the trial version, I was about to buy it but I'm having an annoying problem may be due to the error of the user. When I download music on the cloud and try to put it on final cut the song appears but there no audio as if the song never had any audio recorded on it. If I double click on it before I drag it times the song, whats up is it me or final cut or a number?

  p.s. If I out of youtube mp3 download I can use but which is not ideal and songs I've owned before iCloud work very well.

  You have to specify what are the files "iCloud music."

  Apple's music is a streaming service that puts DRM on the files - you are not allowed to put in video editing applications & reuse them.

  iTunes also sells DRM-free files.

  Correspondence iTunes is DRM free, often called "iCloud Music Library"

  This can help you to use some of the nuances of the different services...

  http://www.IMore.com/icloud-music-library-ultimate-guide

  Frankly, it is a complex disorder but that's what the music companies seem to want to.

  Non - DRM files could be placed on video projects, however, you will still need to take into account that copyright applies to these files and you may need the permission of the holder of rights of content - depending on what you are doing.

• Help - Final Cut Pro does support the phone Sony Xperia Z5?

  I think to buy a phone Sony Xperia Z5.  However, it is supported by Final Cut Pro 10.2.3.  MaxBook Pro, OS X Yosemite, 10.10.5 version I'd be so

  grateful for the help on this!  Arwen

  You will probably get a quicker response by asking users to this phone. Sony has a system of support forum?

  It is not the phone, which is usually the problem, it is the codec the phone registers with it and then the file structure of the memory of the phone card that determine if FCPX can watch films from the phone. If you plan to spend a lot of time to make movies with your phone and edit them in a powerful and expensive tool like FCPX, do yourself a HUGE favor and just get an iPhone.

• It is good to use Final Cut Pro on a MacBook Air?

  It is good to use Final Cut Pro on a MacBook Air?

  Hello...

  You might find a 13 "inches screen a bit small for editing in FCP, but you can try the free trial > http://www.apple.com/final-cut-pro/specs/

  Minimum requirements of the FCP for RAM is 4 GB but 8 GB provide a better workflow.

  To see how much our Mac RAM is installed in your Mac, click the Apple  menu at the top left of your screen.

  In the drop-down menu, click on: about this Mac, then check the "View" tab is selected.

  The amount of RAM memory installed is noted here.

• How to transfer libraries from Final Cut Pro to another hard drive?

  as you can see, my final cut pro and iMovie libraries take up a lot of space. I would like to move into my external hard drive and remove the internal hard drive. I am worrying that the editing software will not be able to know where libraries are, so can you help me? BTW, I don't like on iMovie libraries. shortly after hötting screens, I deleted them.

  PCF. Open select each (sequential) library that you want to move, open the Inspector > Info and click on the button consolidate to collect amy media you used outside the library. Then quit FCP.

  In the Finder, drag the libraries to your external drive. That their copy.

  Double-click the library icons in their external location. Open projects to make sure that everything is OK. When you are satisfied, they are OK, libraries can trash on your system drive.

  Russ

  PS: This is an excellent bookon the management of the library.

• final cut pro does not open

  I can open final cut pro. Everytime I try, it begins to pen, then it is open, and the shot he closes, then editing final say pro closed unexpectedly, please help

  HHold Opt - Cmd that you launch the application to reset the preferences.

• Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no 1080 progressive setting sequence, how can I ensure that I have the best setting of the timeline for my clips

  Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive

  How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!

  The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.

  To make your progressive sequence, set the dominant field to None.

  gerforce wrote:

  Images originally dslr Nikon that I used mpeg streamclip to convert to prores.

  In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?

  Also, the fps footage was actually 30 original and 29.97 not standard?  30 images/s is very limited its use.

  MtD

• Final Cut Pro: I can't share and master my work! Help!

  Hello!

  I'm done editing a video project on Final Cut Pro and more often than I can handle drop my work... BUT it does not work either... I tried with other projects and other video clips but still does not work.

  The video, I'm editing is in 4K. When I click on the main file... NOTHING IS GETTING PAST...

  If someone could help, I would appreciate it! Thank you!

  Delete the application preference files by pressing the command and option keys when you start. It will open to a new empty library. import a HD resolution clip and add it to a test project. You can export some?

  Russ

• How better for import of movement 5 projects in Final Cut Pro

  I use for my projects:

  -Motion 5 (5.1.2)

  -Final Cut Pro X (10.1.4)

  -Compressor (4.1.3)

  -Mavericks OSX on a Macbook Pro 2 GHz and 8 GB RAM

  -The images that requires a lot of editing, green screen and the particle effects

  I had a question about what would be the best way to import Motion 5 sequences into a Final Cut Pro project?

  Specifically, I started using both programs as a hobby, and I learned how to post Motion projects in Final Cut Pro as a generator.

  However, as most of my work involves a broad green screen and the effects of particles of edition, all the sequences essentially have to go through Motion. (as I am skeptical of 'Tools' Final Cut Pro when I can do more with proposal anyway)

  So is the only way to import sequences of movement is made by a generator in Final Cut Pro?

  I feel like there should be (and it might, like why I'm curious) a less encumbering way to import video edited between the movement in addition to hundreds of generators in Final Cut Pro.

  Using the method of generator, it's what I do, and I was wondering if I missed somewhere where I can import media motion editing in Final Cut Pro.

  Thanks in advance for your time and help

  MMake the Motion of the project and export it as a video to use in the PCF file.