HP Officejet 4600 all-in-one: unable to print on my HP 4600 wireless all-in-one

Similar Questions

• OfficeJet 7500 a printers are unable to print on envelopes of standard size European

  To try to resolve the problem of HP sells printers Officejet 7500 has in Europe when they are unable to print on envelopes of European standard sizes, (they only sizes us and we cannot but american size wrapped in Europe. - in Europe, we use the European sizes) and seams that no one at HP gives a dam. They just continue to sell them knowing that they do not work. They will be a reminder of the same put an end to sell them in Europe until they fix this software.

  Hi Kyle, I am on OSX 10.8.4 and tried to pring DL and C5 envelopes, he has not had these listed in the options, I went for the custom size option and the DL, I put in 220 X 110 mm and the printer has always rejected the size of the paper (envelope). HP argues that only American sizes are available to print on this model and I should have air in the specification before buying. However, I belieave that if they sell 1, thousands of these printers in Europe then I probally won't be the only one wanting to print the address on a standard envelope. HP argues that they have not to add the software to print envelopes Europeans to the driver as they do with all their other printers because with what is a printer large format people would use it for plans etc. and not for the envelopes. It is stupid, even if you don't have it used to print a plan, then you need to always print letters and mail these letters into envelopes, reason for which only have American sizes of envelopes on printers that are sold on the European market. They say that nothing can be done and we need to get the printer to the provider. I say that someone at HP should add the European dimension of the software for the driver that the printer is capable, it is a great printer, just the driver software, he drops.

  Thank you

  Roy

• 6520 photosmart e-ALL-IN-ONE s: unable to print from iPad to a wireless printer

  Cannot print from my iPad on my wireless (Yes Internet is on it) printer Photosmart of HP 6520. I tried to send a recipe and he sent me a message to my email saying that he had received and was ready to print from my Photosmart printer. But it only printed the address http at the top of the page (web address) but no recipe.
  Thanks for any help that the alleged aid 24/7 is closed for Mac devices.
  NSDeb

  Hello

  AirPrint is already built into the iPad. I have included a link below with some instructions on how to use it. As long as your ipad and the printer are connected to the same wifi network, AirPrint must operate, your printer is active AirPrint.

  http://WWW8.HP.com/us/en/ads/mobility/overview.html?JumpID=va_r11400_mobileprinting

• HP OFFICEJET 7612: HP OFFICEJET 7612... UNABLE TO PRINT IN A3

  I got this brand new Officejet 7610, and when I choose the paper size for printing, it offers no A3 size in the list.  How can I add it? Help me please I can't find nowhere... I bought this printer to print in A3 and oddly enough I don't have the ability to print in A3! I already tried to uninstall the printer and re - install and it still does not appear in the list of all the different sizes of paper. I have it running on Windows 8.1 on the WiFi (not directly). Is there a software or an updated driver? Or software thar could help me choose paper sizes more?

  Thank you very much, I hope you can help me

  Karl

  I found a solution. I used the HP PCL3 B-size printer driver.

• 5740 e: I just bought a HP Officejet 5740 e and are unable to print

  The printer is connected to the network.  When I go to print, it shows the document I want to print but then disappears in about 15 seconds and prints ever.  Any ideas?

  Thank you

  Steve

  You will need to grant full access to the application subsystem spooler and listing the ports used by the Windows file sharing service.

  You should check the McAfee web site on how to do this as there may be other options.

• HP officejet J4540 all-in - ONE: fax

  When you try to fax with my hp officejet J4540 all-in - ONE I hear the tone, the display shows fax is connected, but I get always a message "fax send failed". I ran a fax set up the test and everything passed. The question might be the telephone line in my house? Phone company put a new filter on the fax line and he sent a fax that day, but none after that. He always says "fax sending failed.

  Hello

  Please contact us. I understand that you are unable to send faxes from your printer.

  You can follow the steps mentioned in the document.

  http://h20565.www2.HP.com/hpsc/doc/public/display?calledBy=Search_Result&docid=emr_na-c01670414&docLocale=en_US

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.* *.

• Printing problems of Notebook PC G72 for Officejet J6480 all-in-one

  Unable to print on my Officejet J6480 HP printer all in one of my G72 Notebook PC.  Do not know what is happening, I could possibly print incorrect setting.  But I was able to print before.

  Hello

  · What is the operating system installed on the computer?

  · You receive an error message or error code when you try to print?

  · This occurs when you try to print with a particular application?

  Try the steps listed in the link below: printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

• OfficeJet 7310 all-in-one

  No longer, print error message: has not "Filter" Stopped -

  Hey @KMAN1,

  Welcome to the Forum from HP Support.  I understand that you are unable to print from Mac using your HP Officejet 7310 all-in-One Printer.  I want to help you with this.  I have some suggestions that can restore your power of print.

  Before you approached the problem from a software point of view, I recommend that to perform a "hard reset":

  1. press the Power button to turn off the printer.
  2. unplug the power cord at the back of the printer.
  3. wait 60 seconds.
  4 reconnect the power cord to the back of the printer.
  5. press the power button to turn on the printer.

  Then, if the problem persists, I recommend that you reset the printing system on your Mac.  Here's how:

  * Note: This process deletes all printers in your printer list, deletes information about all completed print jobs, and deletes all printer presets.

  1. Choose the Apple menu > System Preferences, and then click Printers & Scanners.

  2. Hold down the CTRL key when you click in the list at left, then choose "Reset printing system" from the menu that appears.  After resetting the printing system, the list of printers in the Printers & Scanners preferences is empty.

  Source

  Then, with resetting your printing system, you will need to install a printer Mac driver by using the method of updating of the Apple software or in other words, reinstall your printer.  Click here to get instructions from HP.

  Please let me know the result of your troubleshooting by responding to this post.  If you have any other questions I'm always happy to help you.  If my suggestions happen to have solved your problem, follow the instructions below my grip to give me a virtual h.o.t..

  Thanks again for posting in the Forum from HP Support.  Have a great day!

• HP Solution Center, drivers for Windows XP for HP OfficeJet 5680 all in one

  I have a Windows XP Professional and using the HP OfficeJet 5680 all-in-one printer / scanner / fax. The product is no longer supported by HP (http://h10010.www1.hp.com/wwpc/in/en/sm/WF10a/18972-18972-238444-3328086-3328086-441142.html and http://h10010.www1.hp.com/wwpc/in/en/ho/WF10a/18972-18972-238444-3328086-3328086-441142.html ).

  Recently had a HARD drive crash and had to reinstall Windows XP. My original driver / software CD broke, and now I am unable to use the printer / scanner without drivers. I tried the driver of HP OfficeJet 5600 series, but the Twain driver is broken. Also, I'm used to the HP Image Zone and the center of solutions HP (version 50.0.152.000) that has been previously installed.

  Could someone post the link for the drivers / software for that get up and running. Please, please don't say that the name of the product is bad or anything. I can attach a photo if necessary. I am in desperate need of the solution Center, documentviewer, image area!

  Please, I've done enough research on the web, but did not find anything. Furthermore, why does HP stop providing software support and drivers for a product that is no longer supported? Are there any people who brought and may need support at a later date? Makes me think twice before I can invest in another HP product. In addition, please do not take this a derogatory comment towards, but in reality, we would expect support from the vendor for the product even after that he pulled out of the shops.

  Could you please post or give directions to get the drivers for XP / software for scanning? Thanks for reading a long post, but it was because of my frustration!

  Problem solved by installing the OfficeJet 5600 series software. Thank you. Please close this message.

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.

• HP Officejet 4500 All - in - One-hp officejet 4500 G510g P:

  Stampante Ho Una HPofficejet 4500g510g,.

  by the prima volta ho usato stessa cartucce Originali my ricaricate...

  Can Dell... MENTRE lampeggia it pulsating; Sul display e camera Che sta esguendo Dell MA closed... no fa niente!

  Ho tried ha resettarla... iniziando at Una focopia, sul device display "in copia" ma no lo fa...

  riceve i Comandi dal calcolatore, not li can...

  E ' da 4 anni Che C ' e Ho, quindi senza Assistenza...

  No Yes Cosa Posso fare...

  Hi @maryf78

  If you are using HP original cartridges on your Officejet 4500. Have you tried to clean the contacts of the cartridge and the contacts on the printer?

  More details in the link below...

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---G5/3919445/model/3919447/document/c01953073/

  

  

• All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

  My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

  I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

  I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

  I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

  Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

  FINALLY HE GOT WORKING:

  Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

  Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

  1. If the printer software is installed, uninstall it.

  2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

  If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

  Here are some of the files and locations but check they are all listed and not missing anything.

  c:\Windows\system32\drivers\usbscan.sys

  c:\Windows\system32\hpotscl1.dll

  c:\Windows\system32\hpowiav1.dll

  3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

  c:\Windows\system32\drivers\usbscan.sys

  before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

  c:\Windows\System32\Drivers

  the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

  4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

  5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

  As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

  NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

  And thank you Gemini02 for helping me with this.

• I lost the CD start to my officejet 5510 all-in-one printer

  I fell off my PC under Windows XP and my old printer hp officejet 5510 all in one laptop no longer works. I can't find my CD to reinstall boot. Is that why I get an another boot CD or a way to get this printer working again?  Thank you for your help, Sue

  You can download the full software for printer you in the section to download the software and drivers of the Portal of support for your printer.

• HP Officejet J4580 all-in-One: I just need a disc from the drive, please!

  OS was wrong?

  Hello

  The disk may be too old now. If please download and install the following software and driver:

  http://ftp.HP.com/pub/softlib/software10/COL22247/MP-58704-2/OJJ4500_Full_10.exe

  More resources:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers

  Kind regards.

• HP Officejet 4630 all-in-one printer print cancels in the workplace

  Hello
  
  I recently bought a HP Officejet 4630 all-in-one printer, and it automatically cancels the work in the middle of printing. The computer I use is a dv7 HP Envy with 64-bit Windows 8, and I print on a wireless network connection. My computer receives an error that HP Officejet 4630 series could not perform printing and the printer just says Cancel. I tried all the steps in the sections troubleshooting, both printing and network connections problems. I've uninstalled and reinstalled the software several times, I created a manual IP address and everything, but nothing seems to work. It seems also that the issue when using HP ePrint. It occurs in all sorts of programs and formats such as word, pdf and html. Unfortunately, I did not receive a USB cord, I can't see if that will fix the problem at all. I hope someone can help me with this, otherwise, it is obvious that there is a problem with the actual printer, I have had and I have to return something else.
  
  Thank you

   

   

  This is how I fixed it:

  1. Find out what IP address, is that your printer uses.
  2. Go to control panel, then click "View devices and printers."
  3. Look for your printer right click.
  4. Click on "Printer properties" and a new screen opens.
  5. Along the top, you will see some tabs. Click on the one that says "Ports".
  6. Click on 'Add Port '.
  7. Highlight "Standard TCP/IP Port" by clicking on it, then click "New Port".  A new screen opens.
  8. Click "next".
  9. Type the IP address of your printer, and then click "next".

  Your computer should find your printer.

  Click 'Apply' and your printer should work fine.