Edition of DOOM Colectionneurs

Similar Questions

• The manufacturer custom driver cannot be updated.

  Hello, my computer is a HP p6642f with windows 7 64-bit OS.  I need to update my graphics card for games, I tried to update my HP graphics card but the version on my computer shipped with is the latest version, as the HP 8.15.10.2119 as dated 20/04/2010.  I do not exactly know what graphics card I have, my dxdiag says;

  System

  Information System

  Current date/time: December-12-26 19:07:40

  Computer name: OWNER-HP

  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600)

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  System model: p6642f

  BIOS: 12/07/10 14:03:04 worm: 6.12

  Processor: Intel Core I5 CPU 650 @ 3.20 GHz (4 CPUs), ~3.2GHz

  Memory: RAM 6144MB

  Page file: 6649MB used, 5106 MB of available space

  DirectX version: DirectX 11

  Display

  Device

  Name: Intel(r) HD Graphics

  Manufacturer: Intel Corporation

  Chip type: Intel(r) HD Graphics (Core I5)

  DAC type: internal

  Memory total approx. : 1760 MB

  Current display mode: 1680 x 1050 (32 bit) (59Hz)

  Monitor: generic PnP monitor

  Drivers

  Driver: igdum64.dll, igd10um64.dll, igdumd >

  Version: 8.15.10.2119

  Date: 20/04/10 21:18:38

  WHQL Logo would be: n/a

  DDI version: 10

  WDDM 1.1 driver model

  What I need to know is what graphics card I have the latest update what are not compatible and how to install the new version, the driver from the manufacturer to measure.  Any help will be greatly appreciated.  I got 2 games for Christmas, DOOM 3 BFG edition and limited edition of Medal of Honor Warfighter.  Will not run and I suspect that my graphics card update can fix these two problems.  When I try to load edition BFG DOOM 3, I get the message:

  'Unable to initialize OpenGl' followed;

  Timing QA INIT: 000124ms
  D3BFG 1.1400 win - x 86 November 9, 2012 10:38:21
  3192 MHz Intel CPU with MMX, SSE and SSE2 and SSE3 & HTT
  5872 MB of memory
  -1284 MB of video memory
  Winsock initialized
  Found interface: {F9AFD013-48F7-493D-9C22-4B7CE725EA9F} Microsoft Virtual WiFi Miniport Adapter - 0.0.0.0 netmask NULL - skipped
  Found interface: {79F8D309-CA49-4F2A-91FB-E5E15A263ED0} Realtek PCIe GBE Family Controller - 192.168.0.43/255.255.255.0
  Found interface: {C4E9EFF8-DC43-4D3A-BD95-6E8012AB6738} 802.11n Wireless LAN Card - 0.0.0.0 netmask NULL - skipped
  Sys_InitNetworking: adding loopback interface
  Doom using MMX and SSE SIMD processing
  flush to zero mode
  anomalies-zero mode are enabled
  -Initialization of file system-
  Loaded resource file _Common.resources
  Loaded resource file _Ordered.resources
  Loaded resource file _Sound_pc.resources
  Loaded resource file _Sound_pc_gr.resources
  Reading resource CRC...
  Current search path:
  C:\Program Files (x 86) \Steam\steamapps\common\DOOM 3 Edition/basis of BFG
  C:\Users\owner\Saved Games\id Software\DOOM 3 BFG/base
  file system is initialized.
  --------------------------------------
  WARNING: Could not open the resource file maps/_startup.resources
  -Initialization Decls-
  ------------------------------
  Failed to open the log files
  execing default.cfg
  could not exec D3BFGConfig.cfg
  couldn't exec autoexec.cfg
  -R_InitOpenGL-
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. whose window class
  .. that fake window class
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 640
  dmPelsHeight: 480
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  The initialization of the OpenGL subsystem with velocity: 0 stereo: 0 fullscreen:1
  .. .initializing LHQ
  .. .calling LoadLibrary ("opengl32"): succeeded
  X.. WGL_EXT_swap_control_tear not found
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1680
  dmPelsHeight: 1050
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 59
  .. .calling CDs: ok
  display device: 0
  DeviceName: \\.\DISPLAY1
  DeviceString: Intel(r) HD Graphics
  StateFlags: 0 x 8000005
  DeviceID: PCI VEN_8086 & DEV_0042 & SUBSYS_2A9C103C & REV_18
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Video\{A8527AB9-54FB-49BE-BF2F-02D86CE8A950}\0000
  DeviceName: \\.\DISPLAY1\Monitor0
  DeviceString: Generic PnP monitor
  StateFlags: 0 x 3
  Device ID: MONITOR\HWP2654\ {4d36e96e-e325-11ce-bfc1-08002be10318} \0002
  DeviceKey: \Registry\Machine\System\CurrentControlSet\Control\Class\{4d36e96e-e325-11ce-bfc1-08002be10318}\0002
  dmPosition.x: 0
  dmPosition.y: 0
  dmBitsPerPel: 32
  dmPelsWidth: 1280
  dmPelsHeight: 720
  dmDisplayFlags: 0x0
  dmDisplayFrequency: 60
  .. .created window @ 0,0 (1280 x 720)
  Initialization of the OpenGL driver
  ... SetPixelFormat failed
  Closure of the OpenGL subsystem
  ... wglMakeCurrent (NULL, NULL): failure
  .. .releasing DC: failure
  .. .resetting display
  .. .shutting to the low LHQ
  .. .unloading OpenGL DLL
  Unknown command "vid_restart".
  Cannot initialize OpenGL
  Closure of the OpenGL subsystem
  .. .shutting to the low LHQ

  And when I try to load Warfighter of Medal of Honor Limited Edition I get a window saying:

  'Creation of device DirectX error' followed;

  Could not create D3D device of at least version 10.0 on card 'Intel(r) HD Graphics' chauffeur 'unknown '.  The error is DXGI_ERROR_UNSUPORTED ('East.').

  This is usually casued by not only not the minimum required DirectX support in the GPU.

  For the NVIDIA GPU, DirectX 10.0 support is required.

  For AMD and GPU by other sellers, DirectX 10.1 support is required.

  Okay, for Medal of Honor veteran it says my graphics processor does not support DirectX 10.1, but the fact is that I have direct X 11 which contains everything contains DirectX 10.1.  So I guess DirectX or Medal of Honor Warfighter is looking on behalf of my video card, comparing it to a list of compatible cards, my card has been customized by the manufacturer is not on the list, and if he refuses to try to load DirectX or Medal of Honor Warfighter?  I don't know if there is another way to fix it would be great, but I really want to update my video card.  I heard that the update one driver custom manufacturer can casue instability, but I'm willing to take the risk.  If I can't get a solution to my problem here, I would at least know what is my model of graphics card other than just "Intel(r) HD Graphics (core I5)" so that I can continue the search on my own.

  Here are the specifications of your desktop HP Pavilion p6642f. According to specifications, your computer has integrated Intel HD Graphics using the Intel H57 chipset (when a compatible CPU is installed). There is no driver that will allow you to play these games with the integrated graphic solution effectively very low power that is in your computer. The only way you will get to play these games, is to buy a new game rated PCIe x 16 graphics card and a new PSU rated for the graphics card. Please see 'selection of a discrete video card Dave_G Guide' for more useful information on this subject.

• need to file dplay.dll play doom collectors edition, where I get it or what else can I do

  I have recently upgraded to windows 7 ultimate 64 bit and I try to install programs I had on my old computer. I like the misfortune I can play my doom 3 on here, but not my collectors edition. I can install it but when I go to play it it says I need a dplay.dll file there is no file in the software, it is compatible with xp, but I can not play on here what I do? where I get it. or what can I do else. Oh I also have the file defined to run in xp mode.

  Hello

  What is the full and exact error message?

  I suggest you to follow these steps and check if it works.

  a. navigate to the location C:\Windows\System32.

  b. find the file dplayx.dll.

  c. make a copy of the file and name it to dplay.dll.

  Let us know if it helps.

• I want to reinstall Home Edition on my PC but the XP Installation CD is worn out and not Boot Up

  More is there anywhere I can get a replacement CD or the XP Home Edition software for download. I'm desperate, it's The only OS that Runs The old programs I use for work. Without this OS, I'm just another computer doomed Tech Silicon Valley jobless

  Any help will be greatly appreciated, thanks

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  If the above does not solve your problem that XP is no longer supported AND you have a retail version of Windows XP Edition family, see if a friend has a CD, they can lend you. You don't need their product key, just the CD.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Impossible to edit photos

  Running latest and iOS10...

  When I try to edit a photo taken on the phone, I get a circle appears on the screen with a label of "Download". The circle ends at 25% and then stops.

  Have you tried restarting your iPhone?

• Sierra affecting Preview App PDF edition

  Hi all

  I had my company created as an editable PDF invoice.  View this model of invoice 3 years by Preview app, I was able to easily change addresses of clients, invoice details, amount of fees, taxes, etc.  When finished I would export a copy of the Bill, which would be a version not editable I send to my clients.

  Since the update to Sierra last week, I am not able to use the preview or any other application modify my invoice template.  As I'm typing in text information, some lines of previous text disappear when exporting some or most of the text in the new version disappeared, there is a change in text from the white to the black color in the lower area of the fees of $ final.

  After many attempts, a customer told me on this subject - somehow, I was able to export a version they could read in Adobe Acrobat format, but they have also commented that Acrobat showed the following warning: there is an error on this page.  Acrobat may not display the page correctly.  Please contact the person who created the PDF document to correct the problem.

  After 3 years of working perfectly, now my Bill is haunted! Corrections or suggestions would be greatly appreciated!

  Kind regards

  -Cindy

  Delete the .plist to preview and restart.  users/user/Library/preferences

• How can I remove the 'Edit' button after deletion of the widgets screen in iOS 10?

  I downgraded just installed iOS 10.0.2. A terrible free - almost as bad as i_Tunes 12 - perhaps worse. I would like to know if someone has found a way to get rid of the icon of the button change which is now like a zit in the middle of what was a screen fully functional widgets before it got crowded with icons of Fisher-Price my little pony (which I deleted it). Thank you.

  I'm guessing that Edit button immediately beneath the last widget. So if you have no active widgets it's going to be in the middle of the screen ready for the user to add widgets.  If you have disabled all the widgets I don't know why you would go there anyway.

• Photo editing on IMAC

  For an IMAC, which photo editing software works best to add text to each photo?

  PRView

  LN

• The intention to go for a Macbook Pro mid 2012 model with the Mavericks for video editing in FCPX... is this model for me: Apple Macbook Pro MD101HN/A laptop 13 inch (Core i5, 4 GB, 500 GB, Mac OS Mavericks / Intel HD Graphics), silver

  Hi all! A sale is on and I wonder if this model would help me to edit video in FCPX when I get out of the city. When at home, I use my iMac produce videos.

  Dr. Christophe

  FCPX requires macOS, 10.10... minimum.

• iMac late 2012 edition hangs on reboot after installing Sierra

  I installed on my iMac, edition end of 2012 Sierra, and now it crashes when rebooting and turns off (black screen).

  It has worked very well since the upgrade to Sierra yesterday, but this morning I rebooted and the iMac stop at Midway through the boot process. I turned on several times, but it keep crashing to half way through the implementation process and turns off the power (Black screen and power total power off).

  I reboot in Recovery mode, (key command-R during restart) and am currently OS X via my latest TimeMachine recovery upward. According to the screen, the restoration will take about 2 hours to complete.

  If someone has encountered this problem, and if so, will identify you the cause of the problem?

  No problem on my Mac Pro 2010 but usually this kind of problem can be traced back to the 3rd install party who tries to run at startup.

  If the problem persists try to start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

• Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6) I need to know if I transfer my final cut information in the time line, he transferred to another computer?

  Hello, I have an old macbook in bad condition, I have been editing on final cut pro (6.0.6)

  If I buy a newer computer (macbook)... with a NEW version of final cut... If I transfer all my info from my hard drive to the new computer, and if this newer computer has a new version of final cut pro, it will always show my "timeline" I have... to remember all my files?

  If not... If I buy the same old version of final cut (6.0.6) and any transfer to another computer, my files will appear exactly as they did when I just changed my project?

  Thank you for your help, if you need more information to answer this question correctly, please ask.

  JO

  I asked that your post be moved to:

  Final Cut Pro X

• Photos edited in Photos App is missing after upgrade to MacOS Sierra

  After updating to Mac OS Sierra, all my versions published of my photos is missing.

  Updated to:

  MacOS (10.12) Sierra

  App photos (Version 2.0 (445.1.15))

  It is said:

  -Update of El Capitan Sierra.

  -When the update, I started App Photos and update the library (260 GB).

  -A took the Photos App in the meantime round.

  -After all the thumbnails update was missing, but the pictures would be accessible by clicking on them.

  -Photos App must rebuild now all the thumbnails, but the photos I edited is still missing and even can not be seen by clicking on it (like the non-edited).

  -The missing files are a .jpeg and raw (.nef) from Nikon files.

  

  Have you tried:

  -Existing photo editing works

  -Edit photos (previous edition) missing persons, sometimes shows the missing picture, but it is not always a new tile.

  Any suggestions of how to make the pictures to update modified pictures?

  Did you turn on your mac to remove duplicates or similar cleaning applications?  Some cleaning tools are not safe to use.

  How do you change the photo in question? She has been published with adjustments to Photos or have you used an extension of photo editing?

  -Edit photos (previous edition) missing persons, sometimes shows the missing picture, but it is not always a new tile.

  Have you tried to take pictures with missing tiles to the original version in the control panel?

  And pictures can be exported from Photos or you get an error message?

• Why can't edit my contacts to search with the new ios 10.0.1

  Why can't edit my contacts to search with the new ios 10.0.1

  It seems they have changed the way search works after the update. You can always edit contacts by opening the Contacts app, then open the contact you want to change. We do not know why they made the change, but unfortunately it is out of our reach. I don't know that they had a reason for this. If this is not the case, they will probably patch in an another mini update.

• Apple Watch edition series 2

  the Apple Watch edition series 2 comes only with the Sports Group of cloud or you can change the tape?

  Hello

  Any Apple Watch band fits any Apple Watch of the same size of the case.

  If at first you buy the watch, it is available in preconfigured case and band combinations:

  • http://www.Apple.com/shop/buy-Watch/Apple-watch

  Additional bands are available for purchase as accessories:

  • http://www.Apple.com/shop/watch/bands

• Why are the pictures edition tools grayed out on a photo?

  I use Photos to edit a series of photos from my iPhone on my Macbook Pro (OS 10.11.6) 6s and one photo has all the editing in gray with the exception of Extensions.  Pictures before and after have full editing feature.

  What gives and is it possible to change this picture with Photos?

  It is the first time this has happened...

  Thank you!

  Oh!  I just thought about it... it's a video...

  Never mind!