EHF softwere for installation of hp deskjet 2050 all in one is not compatible with windows 8 sofare

Similar Questions

• DeskJet 4280 all in one can not install on Windows 7, PLEASE PLEASE HELP!

  I'm about to lose ~ for real!

  I just bought a HP Pavilion s5710f PC and my old printer - HP DeskJet 4280 all in one will not be installed!

  Seriously my end mind - I am a student unemployed and can't afford to buy a new printer.  Is it possible that I can install this printer on my new computer?  It must be because it is a HP product and if not, I'm in trouble!

  Please if someone can help me as soon as possible ~ so I would be very happy!

  Thanks in advance for your prompt attention to my more desperate question ~ Whitney

  Hello.

  You have downloaded the Windows 7 drivers for your printer? I suggest you download it and run it so that your printer works correctly on your PC. Make sure that the USB cable from the printer is disconnected before beginning installation. Click on the link below to download the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-74858-1&LC=en&DLC=en&cc=us&OS=4062&product=3390949&sw_lang=

• HP Deskjet 5400 says that it is not compatible with Windows 10

  I try to install my printer on my laptop with the usb cord and when I try to install it, I get the error message that it is not compatible with Windows 10.  Don't know how to fix this or if my printer is simply too old for me to do something.  Help, please!

  You must use the built-in Windows 10 database driver.

• My CD of installation of IntelliPoint 6.3 mouse is not compatible with Windows 8. ???

  I find that my installation of IntelliPoint 6.3 mouse that CD is not compatible with Windows 8, which I just got on a new desktop PC. I plugged the transmitter/receiver and the PC recognized it and it works. But I am concerned about other facilities that are located on the CD. Is there a way I can install/update? Please can someone help here?

  Hello

  I installed a few programs that post this message...

  I just could choose something like "run anyway", ignore or whatever and check the box to display the message...

  That might work for you, but maybe not. It's the kind of a technique blindly.

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• DeskJet 2050 all-in-One - J510: how to print without borders?

  I try to print my project on paper to A4 borderless, but it seems that no matter how to change settings, the results still had a border. Can someone give me some advice on how I could solve this problem?
  
  I print on Word, and my printer is HP Deskjet 2050 all-in-One - J510a.

  Hello.

  The deskjet 2050 printer does not support printing without margins, as you will find by notebook loads below:

  Without borders: No.

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA1-1465EEE.PDF

  This material allows to print only to a certain margin.

  The lower border is 0.57 ", the top border is 0.06 'and the left and right borders are 0.125. any impression beyond these margins is cut off due to the limitations of harware.

• Print on both sides, Deskjet 2050 all-in-One J510a

  Hello

  I have a Deskjet 2050 All - in - One J510a and I just realized that I can't manually print on both sides simply because this function does not exist on the print menu in the Properties window.

  So, how can I print on both sides?

  Thank you

  Gil

  So I guess I should be a REP from HP because these guys are not answering the question? If you go under Printer Properties Advanced there is an option to print only the even or odd, pages print the odd pages first and then put the paper in the printer, go to print click on main pages and bam there you go.

• How can I download my HP Deskjet 2050 All in One series J510 on my netbook without disc

  Is it possible to download my HP Deskjet 2050 All in One J510 printer on my netbook without disk? I really need to print things because my main computer's in the shop. Any help would be greatly appreciated. Thank you. Sincerely, Lisa Horsmon

  Hello

  the software to install your printer can be downloaded here...

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?CC=UK&DLC=en&LC=en&tool=&query=DeskJet+2050

  .. you will need to select model 510, 510 or 510g depending on what model you have.

  Tricky

• HP Deskjet F4850 is not compatible with window 8. Is there a driver for this update?

  I just bought a new laptop with Windows 8. HP Deskjet F4850 is not compatible with window 8. Is there a driver for this update?

  Hello

  The printer make compatible with Windows 8, of course not the original CD which is way before Windows 8.

  Download and install the software below, for USB connection remember to keep the cable disconnected until you will have to connect:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109196-2&cc=us&DLC=en&LC=en&OS=4131&product=3944758&sw_lang=

  Shlomi

• Pavilion DV6000 - update for win 7, card WIRELESS Intel Pro - 100 EV is not compatible with Win 7

  question: Pavilion DV6000 - upgrade vista to windows 7, WIRELESS Intel Pro - VE 100 card is not compatible with Windows 7

  You want to upgrade Vista current on this laptop HP for Windows 7 ultimate. I'm upgrading and not install it from scratch.

  So here's what I have so far...

  1. the Microsoft compatibility tool indicates that the current driver Intel pro 100 VE network connection is not compatible

  2. the Intel site, it says it does not support the OEM driver - to go to the manufacturer site

  http://www.Intel.com/support/network/adapter/PRO100/sb/CS-025637.htm

  3. the driver found on the driver download area HP.com is compatible with Windows XP only says

  Windows 7 may have a built-in driver, he doesn't have much. According to this > Page, it is included in the Windows 7 Installer.

• NVIDIA GeForce 8400M GT: the driver is installed for this device is not compatible with Windows 7 (from Vista 32-bit)

  Hi all, I am interested in my Sony Vaio AR41L (under Vista 32 bit SP2) upgrade to Windows 7, but when I run the Windows 7 Upgrade Advisor, it tells me that, for the graphics card, NVIDIA GeForce 8400 M GT, the driver "installed for this device is not compatible with Windows 7.

  Apparently, NVIDIA is not a solution and sent people to Sony, and Sony say that they have not updated the drivers for Windows 7 and that we do not know when they expect to do...

  All known and solved this problem?  Any suggestions would be very helpful!

  Thanks in advance.

  someone noted that nVidia will come out a new batch of pilots in the coming days. (once a month)

  It may be desirable to wait outside and continue with VGA Standard at the moment. Help others, tell us which solves your problem. Click useful Vote for those who help.

• My Scanner for Canon DR - 2080C is not compatible with Windows 7

  My Canon DR document scanner - 2080C is not supported by Windows 7 64.bit, any solution to this?

  Hi PaalBucher,

  According to the Microsoft Windows 7 Compatibility Center, the scanner is not compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  There are also no drivers for the scanner on the Canon Web site.

  I suggest that you contact Canon support for more information about compatibility scan under Windows 7.

  http://www.USA.Canon.com/Cusa/support

• My hp deskjet 1050 J410 series is not compatible with windows 8?

  I downloaded the new drivers and I am able to print with my printer HP deskjet 1050 J410 but I am not able to scan anydocumants. I can't open the HP printer Assistant window. The error reads as follows:

  Adobe reader software cannot open HPSPProgress.hta because it is not a supported file type or the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I don't know if this has to do with my default programs or what happens. I am currently using 8 64-bit windows.

  Thank you

  Hello

  The doftware is fully compatible with Windows 8, the question appears because of the wrong configuration of your operating system to start the HTA with Adobe Reader files wrongly.

  Follow the steps below, this should solve the problem:

  1. Click the Windows (the key with the Windows Logo) key + keys X, and then open the Control Panel.
  2. Select programs.
  3. Under default programs, select make a file type always open in a specific program.
  4. Lecate and double click in the list .hta (HTML Application will appear in its description).
  5. Select Microsoft (R) HTML Application Host.
  6. If such an option does not appear, click Other Options.
  7. Click find another app on the PC at the bottom of the list.
  8. Navigate to C:\windows\system32 and select mshta.exe
  9. Click on Open, close all windows and then try to open the HP software.
     

• DeskJet 3510 all-in-one will not feed the paper correctly

  I have a Deskjet 3510 all-in-one and it is only about 6 months.  She went from fine print one day not to catch the paper or grab 2 or 3 pieces at a time.  Sometimes, it will sound as he begins to print and then a beep of 2 or 3 times.  Suggestions to help?

  Yes! I wasn't in the lower plate, and that's where he was suspended. Thank you!