EquipmentMissing after the UCS to 2.2

Similar Questions

• D30 does not start after adding drives to the UCS ports

  Hi all

  I have a Lenovo D30 workstation.

  I have my SSD on sata RED ports, and port orange is the DVD unit. So far so good.

  I added 4 drives, connected to the blue sata ports (reader1 4) while the system worked. I launched rest Intel and created a RAID5 volume. All work of until reboot. At the power, I'm looking to a flashing cursor, just after the message 'press enter to...'. In the BIOS I have excluded from the disk 1 to 5 ports such as boot (on 3 different from the menu) device.

  If I take the readers the system starts. After you add the I have to go back to the RAID and also workt fine. But I don't want to recreate the RAID unit after each reboot.

  I made a rookie mistake?

  Hello

  Type: 4354

  The machine is in UEFI

  The option does not appear in the BIOS post screen, however, if you press CTRL-I during post, then the rest option appears. It shows the right RAID config and all 4 disks are visible.

  Discs: 4 x HGST 7K 1000

  Note: This is the drives 2.5 ". I use a 4 Bay of Startech unit to mount in a 5.25 Bay in the system.

  http://www.StarTech.com/nl/en/HDD/mobile-racks/4-drive-25in-removable-SAS-SATA-mobile-rack-backplane...

  The bootdrive is a Samsung 850, 500GB connected to the SATA0 port.

  The system didn't need to start fron all the RAID, but only from the SSD.

  Edit: I deleted the RAID for the rest for the post. Created a RAID5 set and restarted the D30.

  Guess what... it starts as expected. The RAID5 volume present in the W10 and works very well.

  What is the difference in the creation of a whole in the rest menu during post and create one of in W10 RAID?

• The review of the UCS and VCP

  Hi all

  I do not have a secure Channel and yet so I will at least make the test of the UCS?

  Is-Cisco has a system as they will allow us to test of the UCS, but they will not give us unless we are SECURE.

  Thank you

  Ismail

  Hi Ismail

  You can always take the test and still qualify as a Cisco Unified Computing Technology Specialist of the design and a Cisco Unified Computing Technology Support Specialist without a PCV.

  But if you're after Cisco Data Center Unified Computing Support Specialist, etc. then yes VCP is always a pre - req (I heard that there will be rejected in favour of a managed Cisco equivalent, but who is without merit)

  Unfortunatley (that I found) just passing examination VCP wasn't enough, but the VMware course is also a mandatory requirement for VCP VMware.

  Good luck with it.

  Concerning

  Colin

  http://ucsguru.com

• Replace the UCS - b2xx HARD drive

  We have a UCS with blades B200.

  One of the HARD drive led STATIC amber, (it is a HARD drive failure according to the documentation), but UCS Manager did no show any alert.

  My first question is... I see not awake in the UCS Manager? I have to turn on any kind of follow-up to the HARD drive?

  The HARD drive was reflected with RAID 1, then why has decided to install a replacement.

  We extracted the defective HARD drive and inserted a new (because they are Hot Swap we did with the server on).

  But now the UCS Manager is showing the HARD drive as a disc UNKNOWN, so he did not recognize it

  We rebooted the server with no luck.

  What should I do any kind of procedure of the UCS to recognize the new drive and rebuild the RAID 1 mirror?

  Thank you

  Hello

  Which firmware version are you running?

  In versions prior to 2.0, we had has very little followed HDD and reports. The status UNKNOWN to the driver after installing a new is also due to a bug known in versions 1.4 or previous.

  If you see the normal LEDs on the disc, then you know that the re - build is finished, you can also restart the blade and enter the optional ROM of LSI, and check the status of the drivers.

  . / Afonso

• The upgrade of the plant of the UCS 1.0(1a) to 1.1(1b)

  I followed the steps described by Cisco in the UCS Central upgrade and installation guide:

  Step 1	If necessary, restart the virtual machine and change the boot options to boot from the CD-ROM.
  Step 2	Mount the ISO Cisco UCS Central image with the virtual CD/DVD drive.
  Step 3	In the Central Installation of Cisco UCS menu on the ISO image, choose upgrade existing Cisco UCS Central.
  Step 4	Once the upgrade is complete, of the Cisco UCS Central ISO image from the virtual CD/DVD drive.
  Step 5	Restart the Cisco UCS Central VM.

  However after having mounted the ISO of the UCS Central and reloading image of the virtual machine, I never see the UCS just the standard newspaper central installation menu on the screen.

  Anyone got through UCS Central 1.0(1a) to the 1.1(1b)?

  Hi Paul,.

  Yes, the above process works very well. Have you changed the boot order to make sure that it starts on the CD/DVD?

  Also can ensure that the uploaded image is correct.

  . / Afonso

• The UCS firmware update

  Hi all

  What would be the recommended way to upgrade the firmware on a current environment UCS run 1.4.3x?

  wouldn't be better to go from 1.4.3x to 2.0 and 2.1.

  or go straight from 1.4.3x to 2.1 x?

  Thank you

  Kass

  Kass,

  Since you're currently at 1.4, you can directly pass to 2.1 (2) - last version if you wish.  This process can be facilitated in particular by using the function Auto Install of 2.1 Firmware.

  Review the complete upgrade procedure, but essentially you first download the new 2.1 (2) 'A' and 'B' your system UCS beams, then activate the image of the UCS Manager first to the new version 2.1 (2).  After restarting UCSM you can use the feature of Firmware Auto Installer to upgrade the rest of the Infrastructure (IOM and FIs) and then the firmware of server endpoints.

  Kind regards

  Robert

• Question of the UCS Manager

  Hello

  I have problem with manager Cisco UCS, after have logged you in the UCS Manager, I get an error.

  Print.PNG

  

  Cristobal,

  It certainly is a cause of what UCSM bug doesn't do what it is supposed to and the only bug which is really (according to the version you are using) is https://tools.cisco.com/bugsearch/bug/CSCum95854/?reffering_site=dumpcr and seems to be fixed in the latest versions...  2.2.2c; 2.2.3A; 2.5.1a; 3.0.2c (UCS Mini)

  Advice is to contact TAC for assistance (if necessary).

  -Kenny

• The UCS Central + Disjoint layer 2

  We would like to migrate to use UCS Manager 5 cloves separated the Central use of UCS.  We are looking for the best way to set up a VLAN global everything using an infrastructure Disjoint Layer 2.  It seems I would have to create across the world and assign them to a profile in a BASKET for them to get pushed down to this POD, and then in the UCS Manager I would have to get in the VIRTUAL LAN Manager to assign the VLAN for the uplinks appropriate.  Is there a way that we can implement the Manager of vlan in Central UCS or maybe a way to push the VLAN down to the PODS at the beginning then do not remember to do only after the VLAN has been assigned to a profile?

  Hi Jason

  Check https://communities.cisco.com/docs/DOC-35264

  1.3.1a release has the following features:

  ....

  Ability to push the VLAN / VSAN Global to areas of the UCS without using an association of Global SP

  .....

  Walter.

• is more able to stream video from some sites after the upgrade to Safari 10

  

  After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

  Open Safari preferences / Security tab and check the box allow Plug-ins.

  Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

• @Loner TCant boot Windows after the OS disk partitioning

  PLEASE PLEASE PLEASE HELP ME

  Problem is on my MacBook Pro (13-inch, mid-2012)

  Running OS X El Capitan 10.11.6

  Summer read your responses on other threads of hours but I can't seem to fix mine.

  I just tried to do my small MAC drive through disk utility, I shrunk the size of the disk of my mac partition.

  I still see "BOOTCAMP Windows" in Preferences > floppy boot, but when I restart in Windows I get a can not find disc blackscreen/error and it tells me to insert my Windows disk which I did not.

  When I restart the 'option' key now just the MAC HD.

  Can I save my Windows partition or do I have to start all over again?

  diskutil list

  Jakes-MBP-2: ~ the Yllander list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 157,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 189,4 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 152,0 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 157,3 disk1

  Logical volume on disk0s2

  9F21B3EB-6F6E-42D8-A99C-36AF2F4E55F9

  Unencrypted

  Jakes-MBP-2: ~ list of cs Yllander$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group BEB6731E-6A22-488A-93F7-F41E6AAC2D1F

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 157701697536 B (157.7 GB)

  Free space: 18972672 B (19.0 MB)

  |

  +-Physical volume B538AA4D-302D-43DB-B0F0-B013E9100C38

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 157701697536 B (157.7 GB)

  |

  +--> Logical volume family 74C84594-21D7-4067-BD83-F4CEE0EA2B5F

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 9F21B3EB-6F6E-42D8-A99C-36AF2F4E55F9

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 157330403328 B (157.3 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Jakes-MBP-2: ~ Yllander$

  sudo TPG - vv - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 308011128 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  308420768 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  309690304 369946688 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  679636992 262144

  679899136 296873984 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Jakes-MBP-2: ~ Yllander$

  sudo fdisk/dev/disk0

  Jakes-MBP-2: ~ Yllander$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-976773167] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Here are the results of my Terminal for what you asked in the other threads.

  Can I save my Windows partition or do I have to start all over again?

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

• After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  After the September 2016 ioS update my iphone or my ipad are more recognized on my laptop

  What do you mean on your laptop more?  Please provide details.

  Best,

  GDG

• After the installation of Sierra, websites follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  After the installation of Sierra, Web sites started to follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  What are your privacy settings in Safari preferences.

  

• The screen started after the update of the Sierra

  A few seconds after the awakening of my MacBook Pro, some large highly colorful randomly-shaped defects appear on several parts of the screen. Any suggestions?

  Hi buckeye351,

  I understand that you see some video distorted on the screen of your Mac just after that you wake up from its sleep. Which is certainly not normal behavior. I would like to make a few suggestions to help.

  As a first step, I recommend your Mac NVRAM reset. Take a look at this resource that goes on how to reset the NVRAM:

  How to reset the NVRAM on your Mac - Apple Support

  If you continue to experience this problem, check out this site to see if your Macbook Pro with the Retina display model corresponds to one of the models in question:
  Graphic problems - Support Apple MacBook Pro repair Extension program

  Take care!

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.