El Capitan is compatible with Canon Pixma printer?

Similar Questions

• Windows 7 Home Premium 64-bit with Canon IP6600D printer and unknown device

  I have a Windows 7 Premium build with a Canon Pixma IP6600D printer.  It worked sporatically at first with my Windows 7 until recently.  Now, I get an unknown device and the USB Plug N Play reports that it is not recognizing the device.  The USB port on the printer is good as it works perfectly on my XP machines and the USB port is on the PC as the other devices are recognized without incident.

  I tried stuff Device Manager usual for updated driver, updates the window, etc.  As this is a printer compatible 64-bit of Windows 7 (with some minor limitations), I was wondering why all drivers for Windows 7 is not recognize this printer.  Printer is good, USB is good, the cable is good.  Of course, the OEM driver disk is more compatible to reload the printer because it is a 32-bit application.  So, I rely on Microsoft Windows 7 drivers Canon for the deal.

  Just got off the phone with Canon and they confirm that the driver of Windows 7 are compatible plug-n-play and all I need and that Canon does not provide one direct driver other than the Add on Windows 7 x 64.

  Yet once, I ran all the windows and the driver updates to say everything is as current as possible.
  Next?

  THX.
  AGE

  Get the 64 bit Vista http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=11864&default_os=windows_vista driver and install it, then the add-on (if you need it) on the same page, but change the OS to Windows 7 64-bit.

• You can process the envelopes with Canon PIXMA MX452

  Can you?

  Hello jAMESOG.

  You can print on envelopes with the PIXMA MX452.  Before printing, make sure that the right size paper and media type parameters were selected in your program.

  If you need additional assistance, please contact us at 1-800-OK-CANON.

• Editor 2013 incompatibility with Canon MG5520 printer

  I have been using Microsoft Office Professional 2013 on a Dell XPS8700 with Windows 7 Desktop and all-in-one printer of Canon MG5520. Now I get error messages stating "Publisher" is not compatible with the printer. I checked the compatibility of Windows page and the printer IS compatible with Windows 7. I did a "system restore."  I uninstalled and reinstalled the printer.  Need suggestions. Thank you.

  Hello Susan,

  Please keep us updated on the status of the issue.

  As you mentioned that you are faced with this particular problem with Microsoft Publisher 2013, this is why I suggest that you post your question in the forum Microsoft Office to improve assistance in this regard.

  Microsoft Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/office_2013_release-publish-os_device_win7?tab=threads

  Hope this information is useful.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  Thank you

• El Capitan is compatible with a 2008 Black MacBook (4.1)?

  I recently tried to update an old, 2008 Black MacBook (4.1) for El Capitan of Snow Leopard. I received a message saying that I was unable to install... This model is compatible with El Capitan? I have 4 GB of RAM.

  Thank you.

  N °

  (140620)

• El capitan is compatible with microsoft outlook 2011

  Before installing El Capitan I need to know if it is compatible with Microsoft outlook 2011

  You should check with the Microsoft Web site to ensure that all of the updates for Office 2011 have been installed.  It should be compatible, but if you have not installed the updates, it will not.

• lens wide-angle compatible with Canon eos Rebel t5 for $300 or less

  I'm looking for a good wide-angle compatible with my Canon eos Rebel t5 camera. I'm on a tight budget and would like to spend $300 or less on the lens. If you have any recommendations, please let me know.

  FutureSailor wrote:

  I'm looking for a good wide-angle compatible with my Canon eos Rebel t5 camera. I'm on a tight budget and would like to spend $300 or less on the lens. If you have any recommendations, please let me know.

  The STM IS to Canon EF-S 10-18 is your clear choice.

• Can't print or scan documents with Canon MG2470 printer (2400 series)

  Original title: install a driver for the Canon 2400 series printer

  Hello

  I am currently not able to print or scan documents with my Canon MG2470 printer (2400 series), that worked perfectly until a few days ago.

  I tried to reinstall the software of the printer, including the driver, but the latter does not settle.  The control panel displays a yellow triangle with an exclamation mark against the Canon 2400 printer, but when I "fix" the problem, it remains unresolved.  Accordingly, my 'Cute pdf writer' is set as the default printer that is not of much use.

  Regarding documents scanning with the same printer, I now get the error code 5156.69 to come, but I don't seem to be able to solve this problem either.

  Any help on this issue would be appreciated.

  Norman

  Hi Norman,

  This problem can occur because of corrupt drivers, incompatible drivers, due to the printer settings, missing updates, and problems with the printer.

  Please follow the steps mentioned in the following link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you try to install the latest version of the printer driver and software from the printer manufacturer website. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2420#DriversAndSoftware

  Please answer us on the State of the question you tio assist also.

• With Canon LBP6000 printer problems.

  Purchased a Canon LBP6000.
  Installed, but gives an error of communication.
  The error comes on then off so fast, it is difficult to read.
  It will print but without stop (guard printing).
  Install the driver several times.
  Changed the USB cords without change.

  The printer is attached to an old laptop and
  It worked properly.

  I run Windows 7 Home Premium on a Dell Vostro 260 S
  x 64.

  TIA

  Hi Ernie,.

  Have you installed the latest driver for the printer after have downloaded you from the Canon Website?

  If Yes, then I'll ask allows you to check with Canon support for further assistance on the issue. It could be a corrupt setting related to the printer when it is connected to this computer.

  Check out the link to post the same query in Canon forum:

  http://forums.USA.Canon.com/

  Please let us know if you need any other assistance on Windows. We will be happy to help you.

• El Capitan is compatible with the updates of the player?

  El Capitan Mac update is compatible with the updates of the player?

  Hi Robert,.

  The latest version of the 11.0.13 player and the CD player are both compatible with Mac OS El Capitan

  Kind regards

  Rave

• Lightroom 4 to be compatible with Canon Rebel t5, I can't convert the raw files or view them on computer?

  I hope for an update. My digital SLR Canon Rebel t5 is not supported with lightroom 4. I can't review or open images Raw, lightroom render almost useless. Maybe Adobe can send me Lightroom 5.5 help me, while working for my camera compatible. ?

  Lightroom 4 will never be updated to your compatible device.  You can download the DNG Converter and convert the CR2 files to DNG, that would be compatible with Lr4.

• Scanning with Canon PIXMA MX870 all-in-One printer using Windows 7 64 bit

  The computer is unable to recognize the scanner.  The message I get is "cannot communicate with scanner for these reasons - scanner is turned off - scanner is disconnected." Code 2,145,50 "impression is generally OK.  Help.

  Have you tried canon support?

  http://www.USA.Canon.com/Cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_printers/pixma_mx870#ServiceAndSupport

• Cannot print wireless with Canon Pixma MG3120 but can print via USB

  Original title:

  thing.i same cannot connect wireless on mypixma mg3120 printer.did reinstall and shows ok to print, but will not go wireless when I disconnect usb setup cord.tryed everything to fix.

  Hello
   
  Method 1:
   
  Check out the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651
   
  Method 2:
   
  Step 1: Perform a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  Step 2: Install the drivers from the disc and check.

• How to enable two-sided printing on MacBook Pro with Canon MX490 printer

  Hello

  I have the MacBook Pro (retina, 13-inch, early 2013) and OS X version 10.11.4 (15E65) and Printer series Canon MX490.

  When I try to make a double-sided, the printer settings printing does not allow me activate two-sided printing.

  

  Also when I go into the settings of the printer, there is no option for me to select this option to enable printing double-sided or duplex printing etc..

  

  When I try to print with TextEdit settings, I still get the same printer settings and it does not allow me to enable two-sided printing.

  I couldn't find answers online, and frankly it's frustrating. I would appreciate if anyone can help with the problem.

  Thank you very much!

  This is the screenshot of the settings under the printer to textedit. Sorry I don't tie with the original message earlier.

  

• Update OS 10.9 is not compatible with Canon iPrisma 6000 and driver not available from Canon support

  How can I install a driver for my printer Canon with OS 10.9 Mavericks?

  Printer is a Canon iPrisma6000 and download driver is not on the list of printers available Apple

  Thank you

  Linda

  You can't install a driver if you do not have one that works. Have you asked Canon technical support?