element on the page (date picker)

I added a date picker to my report. and in the report source, I added a clause where clause to filter the report based on the selected date (which is one of the columns of the table), but it showed nothing.
WHERE DATE =: P23_DATE

When I remove the where clause appear all the records and when I return it... nothing there.
can someone help me?

Published by: hasni-IT on May 4, 2013 07:19

You have data, it's good. You have isolated the problem to what seems to be the WHERE clause, all right. The WHERE clause is simple, good. So, it would seem DATE NOT =: P23_DATE corresponding to your query.

Don't forget - or noted that if you didn't know these are page elements (always?, for most) strings. As Jeff intimates, if the DATE is a date, you get implicit date conversion in your WHERE clause. (BTW, isn't DAY a reserved word?) May I suggest trying "DATE = TO_DATE (: P23_DATE, 'the date format') ' make explicit a conversion?

Also, I recommend that you run any question, you have a problem with in the APEX SQL command window. Then, you can see immediately what APEX has returned for your query. It helps my a lot of debugging.

Kind regards
Howard

Tags: Database

Similar Questions

  • How to display decimal numbers with elements of the page?

    Hey everybody,

    I work with APEX 4.2. I have a page with an element (element of the page displayed in the text field).

    This point of displays the values the database. If the value in the database is "0.5" item only shows that ", 5" instead of "0.5".

    I tried it already as digital point. Can someone help me?

    Your article is using data column?

    Otherwise, data recovery process:

    Select to_char (number_value, '990.0')

    in: point

    table;

  • Failed to create the element on the page

    Hi all

    I can't create the item on the page.

    I tried

    for (int32 spreadIndex = 0; spreadIndex < spreadCount; spreadIndex ++)

    {

    UIDRef spreadUIDRef (data, spreadList-> GetNthSpreadUID (spreadIndex));

    Spread InterfacePtr < ISpread > (spreadUIDRef, UseDefaultIID());

    Assert (spread);

    if (! spread) {

    Break;

    }

    Int32 numberOfPages = spread-> GetNumPages();

    SDKLayoutHelper layoutHelper;

    for (int32 nPage = 0; nPage < numberOfPages; nPage ++)

    {

    UIDRef page (database, spread-> GetNthPageUID (nPage);)

    PMRect rect1 (0,0,50,100);

    UIDRef pageItemRef = layoutHelper.CreateRectangleFrame (page, rect1);

    }

    }

    Please help me!

    The page is not the parent of the elements on the page.

    The parent of a page element (kSplineItemBoss) is kSpreadLayerBoss, the parent of a page (kPageBoss) is kSpreadLayerBoss too.

    You can create page on kSpreadLayerBoss items.

  • What elements of the page get included in the URL on doSubmit()?

    It's quite perplexed me.

    I have a page with 5 items on the page in a region in a table. All of them are hidden and protected.

    The page is loaded with one of these items on the page specified in the URL.

    If I use the button to delete one or more rows on the, or click on the button "Add new line", the page is submitted and returns with three of these five elements in the page specified in the URL.

    First question: why only 3 and not all 5? Why THESE three? I see no difference between one of the page elements appear in the URL submitted from that which is not.

    Second question: I've changed one of these page items to display conditionally. If a certain condition is not met, the field is never out of the page. However, EVEN THEN when I send the page using one of the buttons above, the field is included in the URL submitted! Should that even happen? That actually seems a safety hazard, unless there is something I am doing wrong.

    I can probably create a test page to apex.oracle.com if necessary. (It of now on apex.oraclecorp.com, but move it will take time because I'll have to remove some sensitive data). But I hope that it is just some easy concept to explain, I'm just not grasp.

    Thank you.
    -Keith

    Hi Keith,

    (1) check the branch. the branch defines what happened on the next page.

    (2) Yes, this is the correct behavior. condition is for rendering, but the direction is fixed.

    brgds,
    Peter

    -----
    Blog: http://www.oracle-and-apex.com
    ApexLib: http://apexlib.oracleapex.info
    Work: http://www.click-click.at

  • You will return the "Select an element in the page" button right in Inspector?

    The 'select an element on the page' is to the extreme left now. Since ver.32 FF. As seen in this image:
    https://MDN.mozillademos.org/files/8315/Inspector-select-element-fx32.PNG
    Change for the worse in my opinion. You will return it right into the next version? Thank you.

    N ° it is always on the far left in the current construction of 35.0a1 of Firefox.

    All Toolbox items are on the far right, including the gear button options to define what items to display.

  • ﷯Error - error message: an element on the page "News" at location 33 642 requires the pixelation, but is too large to rasterize. Resize it smaller and try again... I can't fix this or find that the line number.  How can I find this line?

    ﷯Error - error message: an element on the page "News" at location 33 642 requires the pixelation, but is too large to rasterize. Resize it smaller and try again... I can't fix this or find that the line number.  How can I find this line?

    I don't know why it worked, but I changed the police and was able to download Web site.  Thanks for your help!

  • The default value for the elements of the page get ready when the session is disabled

    Hello

    I am facing this problem, do not know how to solve this problem. Basically, the default value 'elements' on the page don't prepare you when the session is disabled and I visit the page for the first time. So when I check the session for the first time, all page elements are null. But when I revisit the page, page elements sometimes gets.

    Don't know what I'm missing here... Someone has encountered this problem before?

    Thanks in advance! Kindly let me know if you need more clarification.

    Is there a way that the page element can be defined at the time the page is loaded for the first time?

    Yes. Create a "Page Rendering" PL/SQL process. That it is very early in the page rendering (i.e. "on charge ‑‑ after Header"). Set the value of the element of page here:

    BEGIN
      :P10_MY_ITEM := 15;
    END;
    
  • Want to only two elements of the page without a space between them.

    I give a broader and more generic framework to an earlier application seeking a broader response.

    I want two elements on the page without horizontal between space. (Don't ask why!) One is a contant, say ' * ' so I made a single display element. The other is the label of a numeric field that is referenced in the error messages generated by the ARF.

    Call the label LABEL to make this easy. So, I want to see {noformat} * {noformat} LABEL. I don't want to change the label of "* LABEL" because ARF refers to "* LABEL" in error messages. I want to just fix the two elements on the form. This must be something easily done in the APEX, right?

    (For the initial application, see asterisk desire by a label point of page without space between. .)

    Thank you and God bless you,
    Howard

    Hello

    Just change your article networking sessions (if you use apex 4.2)

    Start the new grid: No.
    Start the new row: No.
    New section: No.

    FYI, you may need to use

    & nbsp

    in your point label to get a space

    If you use apex 4.1, I remember: new field should be no.

    Best of luck,

    Best regards
    Fateh
    -------------------
    If you think that my answer was correct or helpful to you, then please check the response as helpful or appropriate.

  • Different value for the element on the page on different areas on the same page?

    Hi all:

    I use APEX 4.0.6 and I have a page with 4 regions and each of the region shows a classic report which SQL is very similar to the other:

    for example

    For region 1, the SQL looks like select * from history where status = 'A ';
    For region 2, the SQL looks like select * from history where status = 'B ';.
    For region 3, the SQL looks like select * from history where status = 'C ';
    For region 4, SQL looks like select * from history where status = ';

    To optimize database performance, I like to create a page element called p_status_value on this page and using the syntax of following link for the SQL statement for all 4 regions:

    Select * from history where status =: p_status_value;

    However, I need this page element value is dynamically change for each region:

    For region 1, p_status_value = "A";
    For region 2, p_status_value = 'B ';.
    For region 3, p_status_value = 'C ';
    For region 4, p_status_value = ';

    Also, I need hide this element of the page on this page.

    Can someone show me how to do this?

    Thanks in advance!

    Kevin

    Published by: Kevin Zhang on May 10, 2011 13:03

    Then I would have 4 regions, with each region report, create a box item in each area, called PXX_REGION_VALUE and then your request is:

    select * from history where status = :PXX_status_value_X; (XX for page # and X for region #).. The database engine will crunch through the query and your dashboard will work fine..
    
    Thank you,
    
    Tony Miller
    Webster, TX
    
    If vegetable oil is made of vegetables, what is baby oil made of?
    
    If this question is answered, please mark the thread as closed and assign points where earned..                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
    
  • Can I move master page elements to elements on the pages of the child?

    Hello

    I have a little trouble with my first website of muse. When I do the objects on the master page forward, everything works fine (even in preview mode and in the browser preview), but on other pages all the parameters of the agreement seem to have disappeared.
    The items I brought forward are covered by elements which should be behind them. Now, I have to copy most of the objects on each page's master page.

    Thnks for your help


    Best regards
    Fred

    P.S. I'll upload some screenshots of the problem as soon as possible.

    This is an expected behavior in Muse. The stacking order of elements on a master page is limited to the master page. Page master are always behaind elements in the pages of the child, and you can't "release" elements on a master to display on top page (z-order) of the elements of child pages. Currently, you must copy and paste items to display on the top on all pages of the child. This has been a frequent feature request. Please add your vote:

    Debloquer master page items on local pages

    http://forums.Adobe.com/ideas/1433

    Layers panel / order

    http://forums.Adobe.com/ideas/1444

    Best regards

    Corey

  • Position of the element on the page

    Hi - I'm still pretty new to LiveCycle so hopefully it'll be easy.

    I produce a PDF and I am trying to get information on each element to put in bookmarks XML so that I can bookmark the PDF dynamically.

    I found that I can use xfa.layout.page (this) in the script of layout: ready to get the page number of each article, but I can't work, how to get the position of each element on the page.  All I can find are this.x/this.y and xfa.layout.x (this) / xfa.layout.x (this), but those will be 0,0 - which I think is because the element is located at the top left of the element that contains.

    Does anyone know how to get the position of an element on the page?

    Thank you

    Dan

    Hi Dan,.

    John Brinkman has x, y of the samples on his blog: http://blogs.adobe.com/formfeed/category/transpromo

    I have here a sample that accesses the x, y position of the objects and mouse, which can help.

    http://cookbooks.Adobe.com/post_Moving_Objects_Around_a_Form-16519.html

    and

    http://assurehsc.IE/blog/index.php/2010/05/moving-objects-around-a-form/

    You are right that the coordinates are based on the top/left of the container. When you work with coordinates I tend to set the container of the Page master at 0,0, so that all objects are then based on this.

    Good luck

    Niall

  • Align the elements of the page (AS) (CS3)

    Gurus, script

    Is there some simple AS the syntax to align the elements on the page selected on a page?

    Dictionary seems to imply that, saying:

    align to distribute Articles of page element : the page to align or distribute items.

    Align option left edges/borders/right edges lower/upper centres centres/vertical edges / horizontal: the type of alignment to apply.

    I tried this:

    say page elements in selection

    put vertical alignment to top of the edges

    end tell

    Thank you!

    Joe

    Its a little crazy but here ya go, I wish that the AppleScript dictionary listed examples... especially when the syntax is wacky.

    Select a bunch of images, or have references object in a list (I use just selection to make it easier):

    Tell application "Adobe InDesign CS3"

    tell the active document
    MyImages set to the selection

    align align them distribute myimages elements align the edges left option
        
    tell the end

    The text in red, this is where you put the settings listed in the dictionary.

    ~ Mike

  • Can adjust the elements on the page in MX, but not in CS3

    I don't know what to call this problem, then couldn't do a search on this forum. I have two computers, which works in Dreamweaver MX, the other running CS3. I can access different elements of a particular set of web pages in MX, for example to resize a photo. But in CS3 all the page elements in the div "content of" highlight as a single element, so that, for example, if I try to remove a Word from the text, the entire content - images, text, etc. - is removed instead. I made these pages in MX. I guess there are some default setting in CS3 which prevents me from access to individual content items. Here's an example page:
    http://www.Colorado.edu/English/faculty/facpages/Winokur.shtml
    Can someone help me? Thanks in advance.

    On Friday, July 4, 2008 03:14:42 + 0000 (UTC), "Zaphod234".
    wrote:

    > But in CS3 all elements on the page in the
    > 'content' div tag nail as one of the singular elements

    She did this with positioned elements. You can double-click on it to
    change inside.

    Gary

  • Set a value of the element of the Page in Javascript

    I've created two elements on the page P9_DEVELOPMENT & P9_DEPARTMENT. The two select lists that are inspired by the shared components and in the sections of the list of the value of the properties display Null = Yes and Null = text "- Select -".

    I want each selection list for mutually is when I select P9_DEVELOPMENT P9_DEPARTMENT is back 'Sélection' - and vice versa. I wrote a function javascript with the following assignment.

    switch (pItem)
    {
    case 'P14_DEVELOPMENT ':
    $x('P14_DEPARTMENT').value = "- select -";
    break; …

    Logic sets the value of "P14_DEPARTMENT" empty, but I do not see "- select -". I get the same result with the statement
    $x('P14_DEPARTMENT').value = null;

    How can I reset the value of P14_DEPARTMENT and then displays the default "- select -"?

    Ned

    If the "- Select -" is the first option in the list select below the statement defines the list select Show "- Select -"

    $x('P14_DEPARTMENT').selectedIndex = 0;

    CITY

  • How to disable a page based on the value of another element on the Page element?

    Hello

    How can I turn a page element using javascript based on the value of another element on the page?

    Eg: P1_TEXT want to be disabled if the value in P1_LCOK = "LOCK".

    How can I do this using javascript. I want this implemt on loading the page.

    Kind regards
    Benz

    Put this function in the page header:

    
    

    and call it in the footer:

    f_disable_item;
    

    Denes Kubicek
    ------------------------------------------------------------------------------
    http://deneskubicek.blogspot.com/
    http://www.Opal-consulting.de/training
    http://Apex.Oracle.com/pls/OTN/f?p=31517:1
    ------------------------------------------------------------------------------

Maybe you are looking for

  • Upgrade to SSD for MacBook Pro 13 "(2011)

    I want to upgrade to a hard drive SSD for my notebook Early 2011 MacBook Pro. What are the specifications of the SSD looking? Is that the kind of 2.5 "(7mm)?"  I was looking at the card SanDisk Ultra II or similar model. What is the process or the wo

  • Updated tv card Qosmio G20 105

    My beloved G20-105 came with an analog TV Tuner card and I want to update card Tuner TV DVB - T. Is it possible and simple it is to get out the old and its replacement by a new? Also where can I get one?

  • Laptop HP 15-R084NG: decommissioning of 8.1 Windows x 64 to Windows 7 Ultimate x 64

    Hello and thanks in advance for the help given to this question. I searched the Forum before posting, but I noticed that this question is very specific to each PC model because the necessary specific drivers for the downgrade to work. I then decided

  • 'Prepare the empty disc' when I insert a CD or DVD

    When I insert any type of disc in my CD/DVD drive, he invites me to "prepare the empty drive. I can't find a solution that actually works. Help! Diane

  • Access to safe mode

    I have a refurbished Dell Optiplex 745 desktop computer. I'm with Windows 7 Pro installed. I then upgraded to Windows to 10, which subsequently installed the first update the operating system. Ten days ago, I received a message that some app had caus