elements of array equal between them?

Similar Questions

• I have Photoshop installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to maintain synchronized so catelogs. What folders/files I need to copy to keep items Organizer catelogs and keywords, the t

  I have Photoshop elements 14 installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to keep synchronized and catalogs. What folders/files I need to copy to keep organizing items catalogs and keywords, tags, synchronized on the laptop and the face recognition Office?

  oliverk3402531 wrote:

  I have Photoshop elements 14 installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to keep synchronized and catalogs. What folders/files I need to copy to keep organizing items catalogs and keywords, tags, synchronized on the laptop and the face recognition Office?

  Looking for the location of your catalog in the menu help > system information. It's all the folder containing the database file catalog.pse14db.

  It's easy to synchronize your catalog...

  But...

  Even if the media folder tree has the same structure, which does not work and all your files will be displayed as "offline" in the catalog synchronized. The reason is that the catalogue in computer stores the location of the media files by the full path AND the identification of the drive (internal serial number). The synchronized catalog will not find files on computer B.

  So, what would be your choice?

  -Store your multimedia files on an external drive and plug it alternately on both computers. No need to synchronize media files; You can even save the catalog on the external drive, no need to synchronize the catalog folder either. Downside: who does not act as a backup. You can use your sync as a simple backup to restore in the drive of origin if necessary.

  -According to John R Ellis, you can assign the same serial number for both drives.

  psedbtool (database of the elements of Photoshop tool)

  I have not tested this, but it should work.

  -The good old method of backup and restore, forgetting the 'sync' is slow, but much more secure (you have two copies over a backup). The HUGE advantage is that you can easily migrate to another computer and still another version of elements, even another OS.

  -My own solution requires some fiddling with the sqlite database and a good understanding of the structure of the database. I have syncs media and catalog or via Synctoy Windows files on an external drive. I create a copy of the catalog I have change in sqlite to point to the serial number of the external drive. The catalogue of the external drive and media are available to any computer with the same version of elements. The advantage of the 'synctoy' method is that it is much easier and faster than an incremental backup in the Organizer.

• First Pro CS5 confuses images between them

  Hi the Adobe community,

  I have a serious problem, holding my project as a whole at the moment, and I really hope you can help me with this.

  First regularly confuses the images I added to my project between them. So when I am importing 2 images, say CIMG5967. JPG and CIMG5974. JPG, dragging them in my project, two new elements are created. But when I put these items in my sequence, both appear as the image, even if they are still correctly named after their original file.

  Sometimes the same problem occurs a few days later, so that the parts of my project, which is already completed, appear suddenly as if I would have used the same image over and over again.

  I use Adobe Premiere Pro CS5 - Version 5.0.3

  To using the option to clean the cache-media-db did not help.

  I don't think that this is a corrupt project.  This sometimes happens with JPEG files.  I think that the solution is to open the images in Photoshop, then save it back again.  This fixes the file header and the fix in PP.

• 4 Apple TV on my office network, get conflicts of IP addresses between them despite being assigned to the reserved addresses.

  4 Apple TV on my office network, get conflicts of IP addresses between them despite being assigned to different addresses reserved in DHCP

  Although it seems that they realize and correct this means my network notifify me of the conflict and that can mean more than 30 emails per day... and on a long weekend which means 90 more e-mails to remove after it making sure it is the same 4 mac address having problems... How can I do that, go away

  Given that you are reserving DHCP addresses, I suppose that you have set the ATV to get automatically addresses. That should work.

  Are there opportunities that they are waking up on WiFi and Ethernet switching? On may switch from one WiFi network to another?

  Do you really need fixed IPs?

  The alternative to the reserved addresses would be to reduce the size of the DHCP pool and set the address, staticly ATV.

  Just by the way, have you given the names of different ATV? This is necessary for the Apple protocols.

  Can you identify the versions of your ATV, see identify your model of Apple TV - Apple Support?

• I'm trying to resize the length of the address bar and the search bar. I could before using a 'line' between them to drag to resize. But now this is not s

  I'm trying to resize the length of the address bar and the search bar. I could before using a 'line' between them to drag to resize. But now it's not showing. Any ideas?

  What I have done this; I added a new toolbar, and moved to the research
  window and other things for her. Now I have a LOT OF ROOM

• On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can hap

  On my iMac OSX El Capitan v 10.11.3 when editing of photos and work between them the screen takes over and moves the picture on the next picture before Ive had the chance to edit, I then fold the photo required to try again. This can happen several times and its so frustrating.

  Similar thing TI also occurs when you are working on other programs on the mac, but not nearly as much.

  Guessing here, but try to disable drag between pages on the tab more than movements in the system preferences > mouse. or a Trackpad. Depending on whether you are using.

• the BACKSPACE key does not work properly and if I want to enter the same letter twice it takes time between them

  the BACKSPACE key does not work properly and when I want to type a leter twice I have white some time between them

  Hello

  In what program?

  Don

• How to change the sizes of elements of array programmatically?

  Hi all

  I have a small question about changing the size of the elements in the array. I hope someone can help, because I am in a bind!

  I connect certain intensities of a range of fibers using a camera. For the calibration of the system, I gain a picture of the camera, click on the image points to divide it into areas of interest. I have my image to overlay with a grid indicating the areas of interests - for example a 4 x 6 picture. I then have to select fibers - or Kings - I want to connect from.

  I have a cluster type-def (a number and a Boolean value) to specify the number of fibers and to enable logging of this fibre power. I superimpose a (transparent) picture of this typedef on my image to correspond with the regions of interest. So here's my problem - I want to change the dimensions of the table for each control corresponds to my KING. I can resize the elements of law on the elements on the façade, but couldn't find a way to do it programmatically. The array property node > element of array > limits don't "change to write" it's the first thing I tried.

  Its only really important elements alignment with my Kings - so adding in the gaps/spacing programmatically would also work for me... goal again once I can't understand how to do this! I've attached a screenshot of part of my image with table superimposed to show you all exactly what is my problem.

  Thanks in advance for you help,

  Dave

  PS I'm under Labview 8.6 without adding vision on.

  Here is my cheat (and cheap) way if you want to get fancy and Center digital indicators and booleans, you could add shims on the North and west sides, too.

• How 2 WinXP SP3 laptop to connect to each other & share files between them?

  Both run WinXP SP3 & all have two ethernet 10/100 cards & an ethernet cable to connect them.  I just want to be able to transfer files between them without having to use a USB key.  Regardless, both can access internet via WiFi. I tried to run the Configuration Wizard from the network several times but they do not always see them.  I need an answer in plain & simple English that my ability to speak geekinese gone with DOS6.22.  My conversational geekinese went out with Win98.

  Hello

   
  Please click the link below,
  How to use Simple file sharing to share files in Windows XP
  http://support.Microsoft.com/kb/304040
  For more information, please see the link below.
  How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP
  http://support.Microsoft.com/kb/307874

• my security system says I have to fitrewalls of operation and conflict between them how can I close an and will clearly be my treatment slow exremely (of many gurus aslledged on my computetr)

  my computer is tellking me I have two firewalls running adding that they can / will conflict with each other.  This will slow down the speed of my computer and if so, how do I close one as you can tell I'm learning but too useful? gurus with own ideas thanks bob

  Hello

  Having a firewall protects your computer can cause problems system, slow, etc., such that there is a conflict between them.

  This normally happens if you have an Internet Security Suite, which includes its own firewall, protecting your computer and have Windows Firewall enabled, too.

  What Antivirus program you have installed?

  And what program give you this advice?

  And you are using a 3rd party Firerwall?

  Zone Alarm is an example of a 3rd party firewall.

  You can disable the firewall of a Suite Internet security within this program.

  Here's how to disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  But before you let do us know what Antivirus you are using to ensure that you receive a message authentic on this firewall problem.

  And you must also have an antivirus installed for the same reasons.

  See you soon.

• Cisco compatible AP541-N & WAP551 between them or not?

  Hello everyone. We have 18 AP541-Ns and 2 WAP551s in our office. And we want to use cluster. My question is that, these access points support each other? If anyone has any idea on this, please help us. And another question:

  They can support 10 (AP541) & 12 points of access (WAP551) by each cluster. So, how can I configure them? Maybe I should create 2 clusters (1st floor and 2nd floor) and divide 10 by 10.

  Please help on top of problem for us.

  Thank you

  AYUSH

  Hi Mary,

  Cluster is not comatible between AP541N and WAP551/561, if you have two choices:

  -use two Cluster, that have the same range of IP to connect between them or

  -use a WDS bridge between an AP541N and a WAP551. The AP541N can use Cluster and WDS for the same time, but the WAP551 does not work. Then, you have the WAP551 in an AP541 Bridge-Mode or you use two WAP as a second group, but Wired then on the same switch.

  Pasadena

• Linking rising switch config - Communication between them

  I'll install UCS with two Catalyst switches (3560 and 3750G). Make a channel of port pair-bond between them? It is a requirement for communication in the workplace?

  To connect the port-channel coming from the FIs to each of two switches? Or I can cable two links to the same uplink switch?

  Plase answer quickly because I am short on time...

  Post edited by: Atle Dale

  Hi Atle,

  Yes we need a l2 of common platforms for VLAN set them on the UCS, as the two FI create two different fabrics (A & B) and all traffic on the blade on B A and vice versa should be settled by the switches upstream. If you do not have a common upper the 3560 and 3750 the then you need to have a link between the two switches. Make sure that enable the VLAN (set on ucs and others if necessary) on these ports but also to ensure that the protocols spanning-tree does not block the.

  I'm not very sure of your second question, but on what I understand:

  (1) If you have several links will even pass his favorite to put in a purchase order

  (2) given that these switches are different and not in a VSS, you need seprate in. for each switch.

  I hope this helps!

  . / Afonso

• I have two computers in Windows 7 which will not each other on my network. All other computers will see and can share files, but they connect between them.

  My HP laptop has installed Win7 Ult, the Fujitus Win7 Pro.

  Both computers were sharing the files back, outside a residential group, for a period of time. One day, they are stopped. No changes have been made to computers. I tried a restore of the system on each of them, and it did not help. I re windows loaded on the HP and that did not help. I don't think that it is only a permission of the questions that I used a windows machine 7 third to map actions to each of the individual laptops using their respective IDs. I can transfer files from one of them the "machine in the middle", then the action of the other, or as a copy/paste between them directly.

  WSD and NetBT will not solve one machine for others, but all other computers on the network will dispay on each machine. Only, they refuse to see each other. I have disabled the firewall. Password protected sharing, ensured that all netbios in the registry settings are correct. Pings between them are inaccessible returnded.

  Any help would be appreciated.

  Thank you!

  Hi Jonathan,.

  I see that you two computers on the network cannot see each other. I'll help you with this problem.

  1. don't you make changes to the computers?

  2 are computers on a domain network?

  3. do you have a router connected to these computers?

  Method 1:

  Open the HomeGroup troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2.

  Make sure that the following services are enabled on the computer.

  (a) click Start, type "services.msc" in the search and click on services. Verify that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 3.

  I suggest you follow the steps in this article.

  Enable or disable network discovery: http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery

  Method 4:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Refer.

  Homegroup:

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/HomeGroup

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• dleecom.exe has been removed and know my computer and the printer can not communcate between them, what I can do

  in my firewall settign my computer and the printer can not communcate between them hit the wrong button because it was working fine

  Flight23,

  Run first remove print jobs to remove all blocked the queue print jobs.

  Unplug your printer,

  Start, Panel, programs and features, your printer, uninstall.

  Restart your computer.

  Make sure that the printer has been deleted. Driver Manual printer removal

  With online computer, insert the floppy disk to the printer and reinstall the printer. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Scaling multiple objects without scaling of the distance between them, or vice versa

  Hello, if you have, for example, three at random circles, how can you in one step change the radii of all three circles without change the distance between them? When I retrieve all circles both by using the selection tool, and use the object-> scale, the size of the circles and the distances between them are set nationally.

  Otherwise, how can you increase the distance between the circles (in other words the size of the triangle balance you might say form) without changing the radii of the circles?

  This helps to actually create the lines connecting the circles and construction of the triangle, so these distances are in fact objects? Is there a solution without having to do that?

  Thanks a lot for all of your thoughts.

  Best-

  DTalvacchio

  The answer in both cases:

  Object > transform > transform each

  In the second case, you will first need to everything that the scale and adjust using transform each.