the BACKSPACE key does not work properly and if I want to enter the same letter twice it takes time between them
the BACKSPACE key does not work properly and when I want to type a leter twice I have white some time between them
Hello
In what program?
Don
Tags: Windows
Similar Questions
-
The internal keyboard BACKSPACE key does not work
I have a laptop Toshiba Satellite and the BACKSPACE key does not work.
He will start work the rare opportunity, but then it just stops working again.
This happens on everything, including word and internet ect.It has been like that for a few weeks now and I turned the laptop and turn off many times.
Is there a way to fix it myself or I send for repair?Please, * don't * tell me:
Get an external keyboard
Try it turn on and off
Just highlight the words and use the delete key - it's annoying to have to do this all the time
Type carefully and do not make so many mistakesThank you!
> Please, don't tell me not to:
> Get an external keyboardAnd why shouldn't t someone recommends you to check the functionality using the external keyboard?
It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!
In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.
But to be honest, I think that its simple keyboard failure and a replacement would solve this.
-
My backspace key does not work!
My backspace key does not work and sound really make my crazy! I wrote a story the other day and I made a mistake and I couldn't use the return back cuz' it wouldn't work! can you tell me how I can fix my backspace key?
~ Maya H.
Hello
Try the keyboard on another computer to see all the works.
If a laptop, try a USB keyboard to see if it is a hardware problem or software.
See you soon.
-
my computer does not work properly and very slow
Dear Sir.
my pc does not work properly and very slow
Can you help me
Velmurugangr
Here are some tips to help you speed up your system and Foundation repair.
1. http://support.microsoft.com/kb/310312 cleaning disc
2 Disk Defragmenter http://support.microsoft.com/kb/314848
3. how to uninstall the unwanted/unused programs http://support.microsoft.com/kb/307895
4. How will I know if I have a http://windows.microsoft.com/en-US/windows7/how-can-i-tell-if-my-computer-has-a-virus virus
5 tools to remove the virus Security Essentials
6. how to run check disk http://support.microsoft.com/kb/315265
Your question is a little vague, suggestions above should give you a good start to decide the issues you face. Let me know it it helps. Thank you.
-
using ubuntu 10.04 (lucid). When you browse a web forum, the BACKSPACE (previous page) does not work. the scroll keys are also a bit jerky. I have two "navigation buttons" and "smooth scrolling" enabled in the options.
-
BACKSPACE key does not work in DW (OSX)
In Dreamweaver, when you select a local file and press the DELETE key (delete back located between the slash and the end key), nothing happens. In the context menu, there is a clear symbol of key but nothing happens.
Someone at - it why the Clear button does not work?
I use OS X 10.6. But I could remember what happens in older operating system.
Thank youAfter the restoration of the preference of keyboard shortcuts, press command-delete seems to work.
I went to another framework and devulcanization back to the game from Macromedia. This seems to have reset the setting.
Everything seems to work so far. Thanks for your willingness to intervene.
-
BACKSPACE key does not work when installing
I want to install Oracle 10.2.0 under Solaris 10 05/08 I use Cygwin and PuTTY 0.6.0 than my X server. In the Oracle installation window, my backspace and del keys do not work. They work fine everywhere else.Don't know if it is the cause of your particular environment, but I've seen this problem before and it is thanks to the NumLock key on.
-
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Premiere Pro CC 2016 does not work properly and I can't go back to the last working version?
Everything was fine so I've upgraded to the latest version (2016.3?)
The reading was nervous or uptight altogether and vomit constant errors.
I use first commercially and only can afford to be in any way buggy.
I started the next version down again (2015) which seems actually much earlier than 2016 previous version I had used successfully? 77
Now all my projects will not open because they were modified in a newer version!
I'm on a dv7 HP ENVY which worked without problems on all other versions of first CC for more than two years.
I've seen others complain how buggy the last CC is which is very disappointing for a commercial tool paid that I relay on so many things.
At this point, I would be happy to know how to install 2016.2 and not in 2015. It worked well for me on 2016.2 & I have no confidence in 2016.3
Thank you
Is there a way I can go back to instead of 9.0 9.1? The CC app does not give me this option?
You go back to 9.0, then download/install the 9.1 patch:
http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html
-
Tecra A2 FN + key does not work properly
Hello world.
I have a Tecra A2 (PTA202A-02R002)
Running on an XP Pro
The FN key is works but doesn't work don't not with others (F6, F7, F8 for the brightness of the screen and wireless).I'd appreciate any help.
Thanks in advance.See you soon
JAXHello
Please check your other thread with the same question/problem on Satellite M40:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53561Toshiba tools for this function are associated OS, not hardware.
-
Satellite Pro C850 keyboard does not work properly and opens several programs
My satellite pro C850 1HE keyboard intermittently stops working correctly, and begins to open programs, for example, by pressing F will open the file search, C open computer this kind of thing
is there a permanent solution to this problem?
This is not something to do with installed programs is not something to do with the browser settings.
restarting the computer works in a short time, but that is a long time, it's really annoying because I use this for work and study!> is there a permanent solution to this problem?
The question is what causes this problem? Is it related hardware or software related issue?
Why n t connect a USB keyboard just to check if the same would happen?
In case the USB keyboard would work fine, I guess that the internal keyboard failures and the solution would be a simple replacement of the defective part.
-
I installed the upgrade of Windows 7 a few months ago, my system was Vista 64 for everything I need, it was the upgrade, when I turn on my PC, my Start menu is not and none of my icons, to fix what I have to keep turning off my pc and turn on again by pressing F8 then go down to the last known configuration, how to fix this without having to shut down my PC and press F8 so that it starts normally all the time
Download malwarebytes and run a virus scan to make sure that your computer is virus-free.
-
Tecra S1 starts correctly but does not work properly and beeps from the BIOS error
Toshiba S1 began to regularly plant after a certain period of use.
Sometimes: BIOS error beeps: short-short-long.
Sometimes: Blue screen of reduced resolution or screen size reduced.
Sometimes: Just freezes (frozen) and must be turned off manually.Toshiba uses its own BIOS, no one knows what these sounds average beep or can provide support?
It is a hardware / connection problem between map chart and monitor or is it an error of memory?Hello
tried to do a memory test? If this isn't the case, I suggest you to do. For these tests, I would prefer to use "memtest86" (www.memtest86.com)
Otherwise I guess that your motherboard is faulty and you need to bring your machine to a local ASP.If you need help to find an ASP, here's a good site:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS
Good luck
Welcome them -
Shift key does not work properly
Hello - I have problems with my shift key. Some letters will benefit, some will not. Maj doesn t work also for the question marks, dollar signs, brackets etc.
Can anyone suggest the problem please /-question mark!
ABCDEFGHIjkllmnopQRSTuvwxyz - it seems to be the keys on the left side of the keyboard!Hello!
I think the best option would be if you connect an external keyboard and test it. You can connect it via USB.
If you have desktop, take the keyboard and test it on your laptop.If the external keyboard works, you need a new internal keyboard. New keyboards are not so expensive then contact ASP and ask for it. ;)
Good bye
-
F11 KEY does not work properly
Hello.
The F11 key on my laptop turned off recently. It was not lit in red when I press it. In addition, the laptop have no sound at all regarless I press F9 or F10 Keys. It's only function when I restart the laptop everytime.
Product name: HP ENVY 4 - 1127TU
Operating system: Microsoft 8
Thank you.
Hello
Try the following.
Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.
Locate the KB2962407 update, right click and choose uninstall. Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates". You will see the update that you have uninstalled just offered once again - right click and select "Hide update".
When windows has reloaded, use the Recovery Manager to reinstall your original IDT HD Audio driver as it is stated in the document at the link below.
Kind regards
DP - K
Maybe you are looking for
-
I want to buy the gold medal and a few game Iron Force beads. And I tried to buy too many times, but I just received this message to get in touch with www.Apple.com/support/iTunes/wow/. . I am now of the Russia, and I can buy music ITunes using my Ap
-
default page is not showing up with wiki and Xcode services on
Hello I have the site, wiki and the Xcode services turned on in my set - up OS X server. I want to display the default page (which has links with other services) by default not pages Xcode or wiki. I saw there is an order of priority article, but sub
-
Satellite A210-19Z: could not get internet to work with Windows XP installed
Hello When I install Windows XP on my Satellite I can not get Internet to work Do I have to install drivers or so?Please post links to the drivers if so. Christian
-
transfer of all, except the os from one computer to another
want to transfer everything except the os from one computer to another
-
"I have a TUNGSTEN EZ on my computer, I want to put it on another computer, the data files personal that I need to copy, so I have the same personal data on both computers?