elements of od complete folder - very slow trash

Hello

iMac: Mac OS X Lion mountain and 32 GB of RAM

I got a few files deleted from a hard drive and the software created a folder with the files that it contains more 2 645 000! Most of the range of 55 KB to 300 KB files.

I know that the finder is slower manage all these files, but if I select, roughly 10,000 files and send them to the Recycle Bin, it takes more than 24 hours to do. Empty the trash is a hrs of slower, but not 24 bit!

Is there a better way to clean up the record?

Thank you

Jacques

It might be faster to move things you want to save, and then delete the entire folder and everything left in it. Perhaps.

You can also... Are you comfortable with the terminal? "rm" is famous for the ease and speed with which it clears stuff. In fact, the biggest challenge is not accidentally irreversibly deleting things wrong.

Tags: Mac

Similar Questions

  • OfficeJet 8720, scan to folder very slow network. any tips?

    I just upgraded to Officejet pro 8600 to 8720.

    The 8720 prints well, but it is incredibly slow for scanning.   Can't believe how slow it is compared to other HP products I've used.

    Is there advice, suggestions on how to speed up scanning?  Or do I need to buy a more expensive model for a faster sweep.

    Please notify.  Thank you.

    Hi @atomarchio,

    I was check in this issue and found a number of things that can help.

    Replace with the IP address of the computer that hosts the folder targets of network for the name of this computer.  For example, if the network path is listed as \\david\8670scans, change it to read \\192.168.1.102\8670scans.

    Turn on the printer and try again.

    Check out this post from @djjaeger82, Officejet Pro 8720 - slow Scan to network folder.

    Let me know how make you out. Thank you!

  • Very slow / freeze while working with photos in Photoshop Elements and Canon DPP

    Suddenly my Windows XP has become very slow or crashes when working with photos.  I have Canon DPP and Photoshop Elements installed, and in the two following occurs: I can edit a photo without any problem but when I try to work with a second picture the system slows down / freezes.  It unlocks after a minute or two each time.  I tried cleaners registry check disk, Disk Defragmenter, virus, etc. etc. scans and no problems.  All other works very well and this problem started just out of nowhere.  Any suggestions or ideas will be greatly appreciated.

    Thanks John.  How do I disconnect from the internet?  I have a cable modem.

    ====================================
    I also have a cable modem and it has a button on top
    who's going to turn off/turn on the connection.

    If your modem does not have the button... you can
    Click on the "connecting to LAN" connection in the notification
    area of your taskbar and select Disable.

    If you go to... Control Panel / network connections you
    right click on the connection to the Local network and send a shortcut
    on your desktop. So, it is more convenient to right click...
    enable / disable...

    Good luck... John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • A shared folder on windows 2008 r2 is very slow

    Hi all

    The scenario is as below.

    1 Server - Windows 2008 r2 with all updates

    2. customers - both Windows 7 and Windows XP

    3. created a domain and all clients are part of the domain.

    4. we shared a number of folders on the server for clients to use.

    The problem is

    1. very slow access to the shared folder in client systems.

    2. sometimes all shared folders showes upward and sometimes not.

    3. sometimes very little, I mean 1 or 2 folder appear, despite 10 or more is shared.

    4. access is extremely slow.

    5. several once be the Member of the domain while accessing the share he asks credentials, even if the user connects using the domain credentials.

    Troubleshooting of the measures taken:

    1. update the server with all updates.

    2. check the network cables and switch.

    Now, we have recently reinstalled the server, which worked very well, because of some hardware of gradations.

    Please help, very urgent and necessary evil.

    Thanks in advance.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • manipulation of file/folder Win 8.1Thunderbird very slow

    Long story short: Win 7 has been corrupted, so I installed Win 8.1. All programs work well, with the exception of Thunderbird. Any action of Thunderbird is extremely slow, up to a few minutes to perform any action. The program is unusable in normal windows mode. However,.

    Thunderbird works fine in safe mode, even with the antivirus software (Iolo / System Mechanic) currently running.

    A cause may be that any action I take with files bigger than a few bytes of Thunderbird is very slow. Copy, move, delete all the files of Thunderbird is extremely slow. I tried to copy other big files and folders in the T-bird folders and delete them, and they work fine. It's just the Thunderbird files that seem to be stuck in the glue.

    I added Thunderbird to my allowed firewall programs, so this is not it.

    I uninstalled and reinstalled Thunderbird, nothing helps.

    There may be other things that you must disable in System Mechanic, such as analysis of messages incoming and outgoing and scanning of attachments.
    Alternatively, you can ask in a forum for System Mechanic.

  • After the malware problem, firefox is very slow, even though I uninstalled it twice.

    I have a malware problem. I have restored the windows and installed the Malwarebytes program. Also, I deleted the registry. After that, I send using firefox. However the mozila was very slow but not internet explore.
    Then, I uninstalled and installed mozila twice but the problem remains.

    Please try to run AdwCleaner and see if Firefox accelerates. If this does not help, try the following steps.

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
    2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

      Click the close button

      ).

    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

    Please report to say if this helped you!

  • Safari crashes constantly and is very slow

    Hello

    I have a problem with safari, it blocks constantly when I try to open the pages such as apple.com.

    Google.com works, but is very slow.

    I already deleted the internet plugins folder in both libraries.

    On another user, everything works fine.

    Process: com.apple.WebKit.WebContent [485]
    Path: /System/library/StagedFrameworks/Safari/WebKit.Framework/versions/A/XPCServices/ com.apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit.WebContent
    Identifier: com.apple.WebKit.WebContent
    Version: 10601 (10601.5.17.4)
    Update information: WebKit2-7601005017004000 ~ 2
    Code type: X 86-64 (native)
    Parent process: ??? [1]
    Responsible: Safari [458]
    ID of the user: 70 s
    Date/time: 10:34:04.353 2016-03-31 + 0200
    OS version: Mac OS X 10.10.5 (14F1713)
    Report Version: 11
    Anonymous UUID: 658BA7B7-7D19-D573-EFB2-B4F100922778

    Time since started awake: 520 seconds

    Discussion crashed: 0 dispatch queue: com.apple.main - wire
    Exception type: EXC_BREAKPOINT (SIGTRAP)
    Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

    Request for clarification:

    CFRetain() called with NULL *.

    Class controller Bundle:

    BrowserBundleController

    Process model:

    Several Web process

    Safari 9

    Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

    Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

    Corruption Safari       See post by Linc Davis

    Safari 8

    Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History and Web Site data. The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

    Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

    Corruption Safari       See post by Linc Davis

  • Internet very slow on Windows Vista (wireless) (originally said Windows 7)

    Original title: very slow internet

    I would like to know what windows 7 64-bit options to activate and to get the best wireless connection.  Right now just getting from one page to the same or another place to place on a page can be a real pain. Thank you for your time

    Proposed by Vista forum moderator as shown in the information system to the Vista computer file
    Home Basic with SP2 installed upgrading.

    Mike

    I apologize is not getting back to you earlier.

    When you download and install games and other you don't normally need to keep what you have downloaded in the downloads folder. Some downloads are wide to remove could free up some disk space! You need to do on a regular basis to keep on top of the problem...

    The content of your video in total 414 GB file. You might look at some of them again? If this is not the case, delete those that you no longer need.

    You have a lot of icons on the desktop. Take a look at these and remove those that you never use.

    When you did above select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  • my computer runs very slow, what can I do?

    my computer runs very slow, what can I do?

    * original title - performance and security in Internet Explorer *.

    Hello

    Use the startup clean and other methods to try to determine the cause of and eliminate
    the questions.

    ---------------------------------------------------------------

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • My computer is very slow. I used it for a year.

    original title: slow computer

    my computer is very slow and I have only had for a year I do not download anything that is mainly for testing or research, but I would like to catch up on shows I missed, but they take forever to watch because it's so slow, how can I solve this problem?

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ===========================================

    Refer to these discussions because many more excellent advice however don't forget to check your antivirus
    programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
    first.

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/GP/slow_windows_performance/en-us

    Performance and Maintenance Tips
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

    Explorer Windows stopped working
    http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

    Hope these helps.

  • Win2008r2 x 64 very slow VM running under Windows 7 Ultimate x 64

    I have searched in the nets and have seen similar problems. However, I just wanted to see if anyone has had the time to fix the issues that I am experiencing. Bascially,: the performance is so bad when you perform an initial installation developer that I shudder to think of what it will be like in normal use. You name: copies of the host is slow, running installs it variety takes an eternity, but the classic is when I installed windows 2008R2 x 64 has taken more than 6 hours to format the 80 GB drive, copy files across and complete the installation.

    In any case, I try to configure a 3.51 .NET / MOSS 2007 Developer of windows 2008R2 x 64 installation. I do this on a labtop to 2.2 Ghz AMD Turion X 2 recently acquired running Windows 7 Ultimate.x64. I have 4 GB of RAM and the usual WIFI Attheros. First of all, I chose VMWare Server 2.01 because it supports USB2 and 64-bit, instant clients while Virtual PC 2007 does ' t.

    Win2008R2 comments

    1. Memory of the VM value first 1 GB 2Gbto see if ifit makes much difference

    2. 2 vCPU

    3. CDROM installed

    4. VMWareTools... haven't tried to install it but page left summary seems to indicate I have not, not sure if it would substantially improve performance.

    5. Bridge networ_k_

    Things to try

    Looking at this networking wire Workstation 6.5 on Windows Vista x 64 host - bridged is broken! The performance of the network very slow folder shared! I should conider

    1. Check that in the laptop BIOS VT is enabled by default - I assumed it was.

    2. Reduction in the number of vCPUs to 1

    3. Drop the CDROM

    4. Ensure that VMWare Tools is fully installed

    5. Deactivation of windows 7 next host card connection network Local - & gt; Configure - & gt; Properties - & gt; Advanced: Large Send Offload v2 (IPv4) and Large Send Offload v2 (IPv6). Remember I'm toward the life of a wifi connection, so this may or may not have any effect

    6. Anything else anyone can think please...?

    I guess I just need some advice to help solve this painful problem, as it is to distract me from what I should do on the guest o/s...

    If you have done nothing yet, try first assign to VM 1 GB and 1 vCPU. Do never set more than 50% of memory available VM vive.

    About RDP: it connects OK? Check the system logs and firewall.

    StarWind Software R & D

    http://www.starwindsoftware.com

  • Firefox very slow while Chrome is fast

    Hi all

    Spin LMDE 2, totally updated and using Firefox 50.0.2 Firefox is really very slow for some time now - it is so slow to start, slow to scroll a page even with one tab open and takes a minute to type a full word. I tried to start Firefox in safe mode, completely deleting my user profile and start fresh, use "apt - get remove - purge" and then reinstalling firefox... and still stupidly slow. Chrome is fast, quick start, can run 20 + tabs without a slowdown in performance, no problem at all.

    And my laptop is not in rest - it is 3 years old, has a processor i7, 8 GB of RAM and a Quadro video card. I have also run 2 LMDE and all apps from a 256 GB SSD card. The directory is on a 500 GB SATA hard drive, however. So I expect you to improve the performance of Firefox, so there must be something wrong - I would really appreciate if someone could give me some guidance as to what could be the problem please?

    Here is the output for inxi:

    [CODE] System: Welcome: travel kernel: 3.16.0 - 4-amd64 x86_64 (64-bit gcc: 4.8.4)

              Desktop: MATE 1.16.1 (Gtk 3.14.5+4) Distro: LinuxMint 2 betsy

    Machine: System: Dell product: Precision M4600 v: 01

              Mobo: Dell model: 08V9YG v: A00 Bios: Dell v: A16 date: 12/26/2013

    Processor: Quad core Intel Core i7-2760QM (- HT - MCP-) cache: 6144 KB

              flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19157
          Clock Speeds: 1: 632 MHz 2: 626 MHz 3: 639 MHz 4: 630 MHz
          5: 612 MHz 6: 615 MHz 7: 612 MHz 8: 609 MHz

    Graphic: Map: NVIDIA GF108GLM [Quadro 1000 M] bus - ID: 01: 00.0

              Display Server: X.Org 1.16.4 driver: nvidia
          Resolution: [email protected]
          GLX Renderer: Quadro 1000M/PCIe/SSE2
          GLX Version: 4.4.0 NVIDIA 340.96 Direct Rendering: Yes

    Audio: Map-1 GF108 NVIDIA High Definition Audio Controller

              driver: snd_hda_intel bus-ID: 01:00.1
          Card-2 Intel 6 Series/C200 Series Family High Definition Audio Controller
          driver: snd_hda_intel bus-ID: 00:1b.0
          Sound: Advanced Linux Sound Architecture v: k3.16.0-4-amd64

    Network: Map-1: Intel Centrino Ultimate-N 6300

              driver: iwlwifi v: in-tree: bus-ID: 03:00.0
          IF: wlan0 state: up mac: 
          Card-2: Intel 82579LM Gigabit Network Connection
          driver: e1000e v: 2.3.2-k port: 8040 bus-ID: 00:19.0
          IF: eth0 state: down mac:

    Drives: Total disk size: 756,2 GB (50.4% used)

              ID-1: /dev/sdb model: TOSHIBA_THNSNH25 size: 256.1GB
          ID-2: /dev/sda model: ST9500423AS size: 500.1GB

    Score: ID - 1: / size: 20G used: 6.1 G (33%) fs: ext4 dev: / dev/sdb2

              ID-2: /home size: 385G used: 349G (96%) fs: ext4 dev: /dev/sda2

    Types of sensors: temperature of the system: processor: 50.0 C mobo: N/A gpu: 0.0:45 C

              Fan Speeds (in rpm): cpu: N/A

    Info: Process: 248 Uptime: 9 min memory: 1215.4/7959.8MB

              Init: SysVinit runlevel: 2 Gcc sys: 4.9.2
          Client: Shell (bash 4.3.301) inxi: 2.1.28/CODE

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you delete your Firefox program files, and then reinstall Firefox. This process does not delete your Firefox profile (such as bookmarks and passwords) data, since this information is stored in a different location.

    To do a clean reinstall of Firefox, follow these steps: Note: you can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
    2. Once the download is complete, close all Firefox Windows (or open the Firefox menu and click on the button close ).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

    Please report to say if this helped you!

    Thank you.

  • very slow Powerbook fine, iMacs

    My family uses 2 iMacs (1 2013, 1 earlier) and an Apple Powerbook at home. 2 iMac is incredibly slow, but the speed of the Powerbook is fine. IMacs both have a lot of unused storage and memory and I completely restored two iMacs and deleted unnecessary files, but they are very slow. I have everything back up on Dropbox and wonder now if the slowness is something to do with the combination of the signal at high speed and by using several connections of Dropbox in the House.  We have a Virgin Media Hub Super 2ac with advertised broadband router of up to 150 Mbps. I made a speed control using www.speedtest.com and the download speed is 105.81 Mbps and download speed is 9.70 Mbps. Any ideas anyone?

    You can view a report of etrecheck for later analysis

    www.etrecheck.com

    but I would like to disable and remove dropbox to test the system and if they improve the problem there.

  • My wifi/internet is very slow since the IPhone Update 9.3.4.

    I have an IPhone 6 and since the update (3 days ago) my wifi/Internet is very slow.

    Minutes of need for pages to load, and the App Store and the ITunes App not to load any. Photos and videos need a time very Long if they work at all.

    The wireless router is not the problem because my laptop works fine with it.

    Thank you for responding!

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

    Alternatively, you can try to reset the App Store first, since it won't load at all. Please follow these steps:

    Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

    Then restart the unit.

    Then sign into the iTunes Store and try to download again.

    (1) restart you device.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

    Council: https://discussions.apple.com/docs/DOC-9892

  • Thunderbird 38.4.0 very slow to open or delete messages (about 5 seconds) CAUSE: Bitdefender AV

    Very slow to open or delete messages in Thunderbird. Compacting folders, emptied the files Junk and trash, no improvement. Just improved 38.4.0 (about 3 hours ago)

    If you have not changed anything except thunderbird update, then it is probably caused by antivirus software. See https://wiki.mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues and https://wiki.mozilla.org/Thunderbird: test: Memory_Usage_Problems

    Let us know what Dominique ind please

Maybe you are looking for