Eliminate safe devices

Similar Questions

• When is it safe devices or disconnect

  When connecting to a port when can usb or other buses, I disconnect me safely?

  When a USB device is connected to your PC, there is a USB icon in your taskbar [i.e. the right side of the taskbar where the clock appears also].

  When you disconnect a USB device, single click, look at the list of USB devices that appears, click the desired device, wait for the confirmation message bubble appears telling you that it is now safe to unplug the device.

  There are some useful exceptions.  Some devices, such as USB memory sticks, can be disconnected without having to go through this routine.  You can check your devices by connecting them, then on Control Panel, Manager of device *, disks section [click the small arrow to the left of the entrance to open the list of disks], select the device that you want to check, do a right click, properties.  Check the policies of entry tab shows it as being optimized for fast moving - which means that you can simply get out at any time [but still, it would be wise to see if its light has stopped flashing to tell you he has finished doing what you told it to do].

  If you are not connected to an administrator account then the PC will give you annoying beep a warning message telling you that you cannot change anything in Device Manager & then only it will open the thing for you to look at.

  If you're still not sure, then stop the PC.  All devices can be disabled if the PC is turned off.

• Activation problem

  true owner has forgotten her icloud ID and its password and sell his iPhone, then how do I active with new icloud

  < published by host >

  Unfortunately, you can't do a lot with your phone, unless you get assistance by the previous owner, they must either provide you with the password to open or delete their account phone entirely remotely by iCloud.com > locate my phone.

  If you are unable to obtain assistance from the owner and are unable to get a refund of your purchase, please eliminate the device responsible for sending it to recycling.

• Help please - transfer photos iOS 10 in OS x 10.6.8

  Can someone suggest a method to transfer a photo from an iPhone to a Macbook OS x 10.6.8 running iOS10 running?

  Bluetooth is no longer connects since update of iOS - iPhone simply says "connection failed" and OSX says that there is a problem with Bluetooth PAN.

  USB connection no longer works with preview or Image Capture.  Image capture said that the iPhone is locked with an access code that is not and the iPhone was said to 'trust' of the computer. To even get a glimpse.

  Is it possible to send photos through WiFi?  10.6.8 can't airdrop.  The only options seem to be to email myself or transfer it via Dropbox or similar.   Horrible if it's a big video.

  I see my £20 Raspberry Pi in the Finder, but there seems to be no way to see an iPhone for £600.

  Any suggestions gratefully received.

  Messaging. Dropbox. A friend with a more current OS which can put the files on a USB key for you after extracting icloud.

  You use an old 7, almost-6-versions-from-being-current on the Mac OS.

  Your options are limited.

  Your 20 pounds Raspberry Pi is not a safe device. Its file system is open to all.

• Why apple is not able to remove the former owner themselves?

  I was scammed in an iPhone n the seller disappeared so I can't unlock it because I don't know the password for the iCloud activation it is said that it was lost or stolen, but I had the reception

  Your reception is worthless, it is created by a criminal act.

  Unfortunately, you can't do a lot with your phone, unless you get assistance by the previous owner, they must either provide you with the password to open or delete their account phone entirely remotely by iCloud.com > locate my phone.

  If you are unable to obtain assistance from the owner and are unable to get a refund of your purchase, please eliminate the device responsible for sending it to recycling.

• A new iOS App, it is 'dangerous '?

  Recently, a new application class iOS #1 in the iOS App Store paid Top Charts.

  It is a security based and many application that its in the App Store, I wonder if such an application can be an open door to a safe device, NONEJailbreak?

  I know that each app can potentially "look in" my device, but perhaps this or similar as can also do something.

  Not that I'm hiding something...

  Any advice will be helpful.

  Thank you.

  PLS see link

  https://iTunes.Apple.com/IL/app/system-and-security-info/id1080681261?Mt=8 & IGN - m pt = uo %3 D 4

  d-jailbreak-detection-tool-in-IOS-app-store/ http://9to5mac.com/2016/05/10/Security-Research-Stefan-Esser-releases-iPhone-IPA

  Sorry for the font size...

  It will not hurt, except that if it is running tests of the system he can discharge battery a bit.  Is it a useful is another question.

• Failure of Windows 7 Service Pack - keyboard missing filter driver - nothing this fixes

  I have a Pavilion dv6, running Windows 7 (x 64) - the software that came with the PC.

  Windows Update tried to install Service Pack 1 (KB976932) - for what seems to be a year now - and each time it fails during Setup and then "lies changes."

  When troubleshooting the installation/configuration has failed, error code 80070490 is provided: device driver error.

  Through "Devices and printers", I literally stripped off unit each for now only that the computer identified himself as a device (it comes to eliminate other devices to potentially cause conflicts).  When I "Troubleshoot" the computer through the "Devices and printers" page, it returns "Keyboard filter driver missing" - so I use the button 'apply the Fix '.  Troubleshooting is complete, and just saying "Keyboard Filter is not a driver" - "not fixed".

  I used the HP website, specific to a computer driver download, under "Keyboard" to install the driver "AMD USB Filter".  Whenever I run the Setup, it says that the driver is detected.  I tried to fix it, unistalling/re-installing/changing - and each time, the "devices and printers" Troubleshooting is back with the same error.

  I tried to use the automatic troublshooter of HP - but after his execution "HP devices Detection" and my PC model/serial number comes up (quite rightly) when I try to use the 'Scan my product' button, nothing happens.

  Now, I do not how to proceed.

  It seems that the Windows7 service pack is not recognize a "Keyboard Filter" - omitting so driver.  By using all the tools of HP that I can find, it seems that the most recent keyboard filter driver is installed.  Whenever Windows Update tries to install Service Pack 1 from the download/installation/configuration steps, my PC is hyjacked for about 45 minutes.  This cycle of 45 happens two or three times a day now... and as you might guess - always at an inopportune time.

  Where should I go from here?  Thank you!

  Hello:

  Unfortunately, I don't have any other suggestions that you can try to correct the error of keyboard filter.

  However, you can do your own installation/repair W7 support by reading the info below.

  If you want to try to repair the installation, select the option fix bottom left of the installation screen.

  Repair installation will not require the use of the product key.

  If you want to do a clean install of Windows using the media that you have done, you will be able to read the complete product key 25 character W7 on the bottom of your laptop.

  If you decide to install the version of W7, remember that your restore partition will no longer work.

  So, make a set of recovery discs before the clean install of Windows.

  Instructions for making a drive of W7 installation/repair.

  Download the version of W7 provided with your PC 32 or 64 bit W7 Home Premium/Professional/ultimate.

  Your probably came with Home Premium.

  Make sure you absolutely get the entire ISO file when you see the download complete message.

  Sometimes, he reports the download is finished and your ISO file is a lot smaller that what he said was downloading.

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a 4 GB flash drive to use the method of compilation USB or DVD.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• TPM triggers the key request that no material has been changed.

  I use a Lenovo ThinkPad W520 enabled running Microsoft Windows 7 Enterprise with BitLocker encryption keys stored on the TPM Module (TPM). The laptop is frequently used with a docking station. No changes have been made to equipment connected to the laptop, the material inside the laptop or hardware connected to the docking station. Although the material does not change I believe be asked randomly with the guest of TPM to unlock the device at startup. It is a question of severe usability. The guests are so frequent that the TPM module ensures no more values. The value of the possession of the keys in the TPM is lost when the number of guests of the key is too frequent and unpredictable.

  What are the events should Tigger for the TPM secure request the key? Other users have found to the TPM to be usable on other machines W520 with Windows 7?

  Test system: Lenovo ThinkPad W520

  Go to settings BIOS F1, menu boot, Boot.

  What is your boot order?

  Best practices for bitlocker, is to eliminate all devices in the boot sequence that you use and put the HARD drive at the top of the boot order.

  #1 causes unexpected bitlocker recovery guests is not to have the HARD drive at the top of the boot order.

  If you have changed your hardware configuration or the BIOS version recently, bitlocker invites you every time you start (by design).  To resolve this problem, you must stop/restart the bitlocker protection in the bitlocker Control Panel.

• Q5 remove blackBerry applications? Getting locked in unwanted applications?

  I'm new. Please bear with me if this has been answered before. There are tons of questions posted in the forums, and I can't find any search bar functionality to refine messages to see if my questions have been answered.

  I don't want facebook, twitter or linkedin. I want just a safe device, made in Canada, with real buttons that click when I press them.

  I can't find where in the settings I can delete these built-in apps.

  I thought that maybe I should go into one to get rid of him. I clicked on Facebook. He asked me to add an account. I hit Cancel and it went to a blue screen of Facebook with a button to add an account. Try, try and try as I might, I couldn't slide down to exit the application. There is no END button, no EXIT button, no button CLOSE, I don't know.

  I turned off the camera and turn it on to get out of the app.

  How to remove unwanted applications?

  How do I close apps so they run no more?

  Sorry if my tone is frustrated or rude. I don't want to write off the company immediately. I'm just getting used to, having trouble, and that affects my emotions. I tried to be as neutral as possible, because I know that the question might well be the user (me) and not the device or its software.

  Thank you in advance.

  I found the answer to my own questions by myself.

  1. to remove an application, hold its icon until all the icons start punctuated with a little icon to the trash. Click on the trash. Click on confirm.

  2. to close an application, slide UPWARDS, not downwards.

• error: "module tries to access the API blocked" even if it is signed

  Hello

  I have a request I have compile for various brand (image and some const are different) using the same code base.

  My problem is that the code event and the process of compiling/signature is the same, SOME fail version to run on the device for pointing out the error "module attempts to access secure APIs"

  I found the various page talking about the same problem:

  • http://supportforums.BlackBerry.com/T5/Java-development/error-module-attemps-to-access-secure-API-Bu...
  • DB-00717: http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/Support_-_Sign...

  I checked that the jad got the hash and SignatureTool reported cod signed (it's not DB-00717, I check the csl).

  I think that my problem is DTS 55471

  "DTS 55471: cannot load the signed file.
  If the addition of a signature causes the data to a .cod file section be more than 65536 bytes (2 ^ 16) in size, the application file signatory does not report an error, and cannot load the .cod on a security file. Impact: In rare cases, a .cod file signed by the signing tool does not work on a safe device.
  Solution: Increase or decrease the size of the file. "

  So, my questions are the following:

  • How can I detect that cod got a too big 'data' section (ideally using a lot) without installing it on the device?
  • How can I actually change the size of compiled cod "section of data" otherwise than by trying and error? (I had 32 version of the application using the same code)

  Technical info:

  • Tested on BB 9500 Storm OS 4.7.0.141 device
  • Compiled with JDE 4.2.1 4.6 and 4.7.
  • Signed with JDE 4.2.1 SignatureTool

  I look forward to the advice / tips

  Christophe

  During this time, because it's a bug to know, I tried to connect with a newer JDE SignatureTool cod.

  With the JDE 6.0.0 (dl RIM date 23/05/2011).

  I could sign and execute my cod (same as before ounces) on the 9500!

  So, the solution is: use the JDE 6.0.0 signatureTool

  Sorry, I do not tried before posting. I hope that this post will help someone.

  Kind regards

• Question of SDHC blackBerry Smartphones

  I have a 8 GB SD micro card for my blackberry pearl 8130. Well, I also have a standard 2 gig. To me, it seems that via usb port of the BB, the gig 2 has a faster than 8 transfer rate. A 100 song meg takes less than a minute for the 2 concert, while the 8 GB takes around 2-3 minutes. Is the card itself or the blackberry? [btw, the 8 GB has a '4' as the speed] I should buy a usb micro SD card reader?

  If nothing else it eliminates another device to route transfers

  I can drag and drop songs 668 to my card in less than 4 min (card reader)

  On the Blackberry 6-8, what is the difference, you must be more hurry

  than me

  I always get the card reader, it's cheap and convenient

  Thank you

  If you need more information, please ask!

  If this is not the case, take a moment to address the message, OK?

  Thank you

• Phone locked blackBerry Smartphones help

  Please help I had blackberry curve 9320 yesterday! I entered inadvert must have a password to open the phone and can't remember! I used all those that I usually use, and the last test can someone advise please?

  Hi deb25426

  Welcome to the Forums of the BlackBerry Support

  Sorry, but no one can help others, then yourself to recover the password that you put on your device, BlackBerry devices are safer devices, it does allow you to access this device without a correct password, if you enter too wrong password it will begin a process of erasure. Please think again and try to remember the password that you set on this device, also I think you may have a mix of different characters in your password, and you are not able to enter properly on the keyboard for BlackBerry. For example, if your password

  • deb25426
  • And you type d > e > b > alt > 2 > 5 > 4 > 2 > 6
  • the result will be
  • deb2dsef

  You must enter

  • d > e > b > alt > 2 > alt > 5 > alt > 4 > alt > 2 > alt > 6
  • to get deb25426 on your device.

  For example, while on the BlackBerry keyboard, you think you type deb25426 , you actually type deb2dsef . So take your time and enter the password.

• BlackBerry Smartphones Blackberry instant messaging between blackberry users

  I was wondering if anyone knows if IM text is stored on servers or are they diapear in the air?

  From what I've heard that they stored anywhere, but I would like to know for sure... RIM will not be replied to my question unless I have register and have an account.

  Thanking you in advance!

  Welcome to the forums

  BlackBerry is believed to be extremely safe devices, and that's why many companies prefer them to other smartphones. I can't Imaging RIM store such information on their servers, they essentially act as a conduit for messages from one device to the other. You can be quite certain that they don't keep this information because it would probably violate privacy laws too. The only place IM text is stored on your phone.

  However, if you use a phone from the company, then the company (if it uses blackbery enterprise server) can potentially open information if they want, but not the RIM.

• Problem with neutralizing the title

  Hello community,

  I have a strange problem.

  The last time I got a PDF file and I neutralized the title because no one should see that he comes.

  Now, the thing is when I open the file for a moment, that the title is visible but I it neutralized.

  Can someone help me?

  Best regards

  Ronny

  I guess you covered just the title. This is not good. The title will also be to copy/paste. The only way to eliminate safe is the function of writing.

• Hello! If I icloud library disabled, will be always saved pictures? I know that your backup stores the photo library of all devices and because I'm not all devices to be synchronized I think I'm safe and won't lose my pictures/videos. Right?

  Hello! If I icloud library disabled, will be always saved pictures? I know that your backup stores the photo library of all devices and because I'm not all devices to be synchronized I think I'm safe and won't lose my pictures/videos. Can someone please clarify?

  If you want your photos backed up, you must import them into the photos on the computer application that synchronize you with. iCloud photo library is a repository for all the photos for a given iCloud ID. However, it is not required for the care of your photos. I do not use iCloud photo library - import my photos into the library of Photos on my Mac.

  A backup of your device iCloud will save your current film, but if you remove anything from this film, then it will not be available for retrieval at a later date, because backups replace the previous backup version. A backup is so not an archive safe for your photos or videos.

  Photo stream keeps the last 30 days or 1000 photos taken with your camera if you have Photo Stream on, but once again, it's a temporary storage that gets crushed. Photo stream is intended to provide a method of sharing photos between the signed devices on the same iCloud account, but is not intended as an archive.

  Import your pictures and videos on a computer means that all photos and videos are kept in a library on your computer and will be accessible. It is the only safe way to archive your photos:

  PHOTO IMPORT IOS ON MAC/PC

  Good luck

  GB