eliminate the use of the password when my computer wakes

Similar Questions

• Im trying to use easy transfer. missed the password when I put the files on the flash drive. How to find the password, now that I try to install the transfer?

  I'm putting my files on my new laptop to help facilitate the transfer.  My fiance ' put on a USB of my old laptop and did not notice the password when it did.  Now I can't get into my files because I do not know the password.  How can I get this password?  the old laptop is now to the pawnbroker, and I don't have access to it.

  Unfortunately, it is not only against Microsoft terms of use in order to help bypass passwords, it is also illegal in many countries, including the United States.  Self-help in breach or otherwise circumvent a password, you will have to search separately online.

  See also: the Strategy of Microsoft about lost or forgotten passwords

• Customer Cisco VPN not prompt to change the password when the Radius ID is due has expired.

  Hello, I would like to know what is behind a Cisco VPN client software to the user PC invites not to change the password when their password ID RADIUS is expiring/expired. I would also like to know what is the solution to work around him. Thanks in advance.

  Hello

  The "password management" command is configured?

  For the password function - expires to work in conjunction with the ray, that's all you need on the SAA.

  Let me know.

  Thank you.

• I don't remember the password for my network, but I do remember the password for my computer and my home group.

  I don't remember the password for my network, I remember the password to my computer and my home group, they are all different to change that, but family crisis distract me unable to use my ipad now or my other computer help!

  original title: password

  Hello

  What operating system is installed on the computer?

  Perform the steps mentioned below, if you have Windows 7 installed on the computer and see if the problem persists.

  a: right click on the wireless in your taskbar icon.

  b: open network and sharing Center and then click manage wireless networks on the left.

  c: you will see all the networks you have connected too.

  d: right click on any connection to Properties.

  e: click on the Security tab that shows the details of the security of the network including the password. Click on the box to Show characters.

  Hope this information helps.

• Can I make a password reset the flash drive to reset the password on my computer dell laptop?

  OT: reset password

  can I make a password reset the flash drive to reset the password on my computer dell laptop?

  Yes here's how:

  http://www.Dummies.com/how-to/content/how-to-create-a-password-reset-disk-for-Windows-81.html

• Get a box to enter the password when you start the computer

  * Original title: turn my computer

  When I start my computer, I get abox asking you the windows xp startup password.  This has never happened before and I don't know the password.

  Hello

  -Have there been recent changes made on the computer before the show?

  I suggest you to check if you can connect to your account or the account of default administrator in safe mode.

  Check out the link for more information on how to enter Safe Mode.

  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  a. the built-in Administrator account is disabled by default.

  b. you will see an icon for the administrator on the homescreen mode without failure.

  c. connect you (the password will be a white)

  If you are able to start the computer in safe mode, try to check and restore the system.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Please get back to us with the information above to help you accordingly.

• (Redirected) Do not accept the password when connecting

  Have a Dell laptop 15 3520 running Windows 8.1 have been logging in fine and all of a sudden it will not recognize the password. System is configured to connect by using the account of Microsoft and no password. Now, he starts asking a password and can't log into Windows at all. I went to another computer and connected to the Microsoft account and changed the password, but when I return to the locked computer it does not accept the new password either. Do not wipe and reload Windows 8 and Windows 8.1 again.

  Hi WestwindRV,

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• How can I get rid of the password when opening windows 8.

  When I upgraded to Windows 8, the system wouldn't let me move forward without anything put in the password box.  I don't want a password when you connect to my laptop.  How can I change this feature to avoid this? 3

  Also... Please don't waste your time telling me it's for my protection... duh

  Hi jfkadlec,

  From the Office:

  Press the Windows key + R
  Type netplwiz and press enter
  Remove the check mark from "users must enter a user name and password to use this computer"

  I'm still going for you recommend to not remove this option for obvious reasons, but the above, you should get what you want.

  Keith

• When I opened Installer creative cloud asked that the password when I correctly put in it does not work

  Try to get a trial in creative and Photoshop clouds, but when I open the installer of creative cloud he asks username and password. When I put my adobe user and the password which is OK he just shakes and goes no further

  Hello

  When you launch Installer creative cloud he needs your Mac password for authorization of user account to install the software. I hope that you do not use your Adobe ID password on this line.

• How can I fix the problem when another computer is using the same IP address with me?

  My computer has proven to me that there is another computer using my IP address.

  He said I need to contact the administrator.
  I don't know how to do in this regard. Help, please.

  Since it's your own home network, it means you are the network administrator. Which basically means that you should have total control on who can and can not connect to internet through this network.

  Then, you should have a router somewhere in your House. This is the device that sends the wireless signal. Most likely, it will be connected to a phone jack or cable from the wall, or a modem, depending on which company you get your internet service.

  You need to find this device, the router and restart for it. Do the same on your computer. Once both have restarted, try to connect to the internet. The router must have an ID written somewhere on it. This same ID should appear in your network and sharing Center , if you click on "Connect To A Network.

  The homegroup is something a little different. A homegroup is really just a collection of your own computers, or in your home. For example, if you had a desktop and a laptop, and I wanted to share the files from one to the other, you should join them in the same homegroup. It has nothing to do with putting on the Internet, just the connection of two computers together. It of good that you set up a homegroup with a password, but won't really help you here.

• HP Jet 13: could not get the usable screen after you enter the password when you restart

  After reboot I get the standard wallpaper (like the rings of Saturn), hour, day, week, month, and day, wifi bars and battery.  After the press, I have the icon pushing, my name, email and password.  By entering the password I get the points surrounding white and WELCOME, then by default in the screen with only sûr white pointer visiible.

  That's all new laptop from Amazon and seemed to work well until I have intalled the Office 365 online.  Then I started to get warnings from McAfee on bad files 'try to start', then the blank screen even during reboot.

  Please let me how to restore my system or to whom to return it.

  Thank you

  The model / sn numbers are tiny, but can be: model 13-c010nr sn 5CD50311MZ

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• How to remove the password when connecting?

  Original title: Windows startup

  I run Windows 7 (64 bit) on a portable computer and a desktop computer without password on each of them. When I opened my computer the morning the laptop accesses programs without having to do anything myself. For the office, I have the key STROKE so that Windows will be ready to start. Can someone tell me how to run the office without blocking on the password page

  Here you go:

  1. press Windows + R key on your keyboard.

  2. Enter the following command and press ENTER:

  netplwiz

  3 click your account name.

  4. uncheck the box that requires users to enter a password.

  5. click on OK.

  6. Enter your password when you are prompted, and then click OK.

  7. make a note of this method and your password (because you will be to forget both!)

• How do I remove the password when signing

  Must I log in whenever I want to use my computer? so boring, and why do I need to create and use a Microsoft account?

  Hi Kathy...
  The password gives an element of protection and is worth keeping (and put up with) if someone you do not trust implicitly could gain access to your pc. If you think that it's really likely to be a problem, you can go to the control panel user accounts where you will find the option change or remove your password.

  Create a MS account facilitates the use of the online features of MS and once you you can ask your pc for remember and forget more or less to this topic, but again - no obligation, as far as I KNOW...

  Cordially - Ric.

• Does not accept the password when I try to update Adobe Flash

  I understand that I'm supposed to use my system password. He will not accept the update. It accepts either of my Adobe password. Now what?

  Hello

  Try link below:

  What userid & password should I install Flash Player

• ColdFusion Launcher does not accept the password when you try to change the web server

  I know this will sound stupid as wrong password is a password wrong, right? Well I swear I know my passwords and it's not having it.

  I am running coldfusion 9 and I want to change the default internal server that I put it to the top with the installation on apache server that ships with mac OS x. So I started the coldfusion launcher and clicked the button Web server connection utility to set up, he asks a password to continue, but usually accept it... I tried both of the passwords that I use for stuff course where I was confused which it requested one, but is not having either.

  I tried to change the password for the coldfusion administrator and still no joy. I know that sounds stupid, but I do not understand... How can I get if she does not accept my admin password... I have tried uninstall and try again once like stuff as it is a nightmare to get rid of my experience... always leaves a file somewhere that you can never seem to isolate who mucks upward following installation so I left it for the moment. Anyone got any ideas?

  OK, you cannot double-click the wsconfig file, cause, then you are not running it as sudo, so you will not be allowed.  'sudo' is 'Super user' and allows you to run a program, temporarily, as a super user.  If you do that you won't have permission to edit the httpd config file.

  Try the following.

  Launch the Terminal

  type: cd/Applications/ColdFusion9/runtime/lib (change the correct path if it is not the path to your ColdFusion)

  Press enter

  type: sudo java-jar wsconfig.jar

  Press enter

  It should ask you for your password. Enter it and press ENTER again.

  It should launch the configuration tool, this time with the appropriate permissions to modify the file httd.conf.

  Good luck