EliteBook 8470P: new ssd is installed and functional, but unrecognized

Similar Questions

• My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about t

  My SSD with a version of Dreamweaver CS6 running crashed. Now a new SSD is installed and every time I try to reinstall DW CS6 error "inconsistency in the database Setup" (in German terms) occurs. I tried to delete everything about CS6, rebootet and so forth--nothing worked. Two hours later, I tried to install DW 5.5 - that worked. Then I tried again to install 6.0 - without success. Can anyone help?

  Thank you for your response. I could not find caps.db.

  Meanwhile, I solved the problem as follows: I searched "dreamweaver" everywhere one deleted all that I could find. Then I googled "CS6" and did the same. I guess that there are around 20 or more places where I deleted files or directories. Suddenly, installation has not prevented, to 2%, what he has always done before and the installation was a success :-) It cost me more than 4 hours to understand this, and I have found a trick somewhere really help. Adobe itself I could not contact because I couldn't find an email address or a phone number - poor support for such expensive software. For luck, I didn't deliver something just in time. Missing a useful support, it's an attitude really poor, poor Adobe... I think that I do not buy not more products Adobe - it could cost too much of my time... :-(

• Since the installation of Firefox 4 Beta 5, the Add-ons Manager is empty. My modules, however, seem to be installed and working, but I cannot, install or uninstall or configure them.

  My modules, however, seem to be installed and working, but I cannot, install or uninstall or configure them.

  Try to force Firefox to rebuild the list of installed modules.

  1. Open the profile folder for more details on how to access see article profiles - where Firefox stores your bookmarks, passwords and other user data .
  2. Closing Firefox, then delete extensions.sqlite (you can also delete extensions.cache, extensions.ini and extensions.rdf if they exist)

  When you restart Firefox must be rebuilt on the list of installed modules.

  If this does not work, you can have an add-on that is causing the problem, try the options in article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  If you type Subject: addons in the address bar that brings to the top of the list of modules? I saw a list of empty modules if Mr Tech Toolkit is installed, accessing the Manager add-on by typing about: addons in the address bar is a workaround with this add-on installed. The author of this add-on is working on an update.

• my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  my laptop displays windows is installed and activated but when I go to use powerpoint, he asks a validation of key that when I get home he tells me is not valid

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure

  Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure Mode (failure mode). Can anyone help?

  Hello

  Click Edit > Preferences

  Go to the interface tab and check the font size: it should be automatic.

  Press enter

  Restart the Lightroom

  Thank you

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Installed and running, but won't open or create docs.

  I downloaded, installed and opened the trial PS on my Samsung laptop. Everything seems happiest moment of the launch, just nothing happens whenever I try to open existing pds of files or even create a new doc. After clicking to open a file, the window disappears (as expected), but then nothing: no message pop - up, no. nothing.

  It may be interesting to note that this is my first time using PS on a Windows device, but I don't see what I might be missing! Any help is appreciated.

  Restart your computer and try again.

  Check if other applications can open/create files on the same drive.

  probably you have a permissions problem, but this could also be caused by a third-party software.

• This computer is missing an adapter wireless installed and configured - but last night he did!

  After soundcards installed automatically updated from last night, I lost my ability to connect to my wireless network, or other WiFi networks.  The message: this computer does not have an installed and configured wireless network adapter.  I reconfigured Linksys, updated device driver and still it tells me I don't have any adapter.  When the pilot device updated changed for NVIDIA nForce 10/100 mbs which is different from that of its former name (was stilll NVIDIA but I don't remember the rest).  Advice please?

  A little tip for you: do not install hardware 3rd party via Windows Update drivers.
  Find them in the constructor.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Cc14 Photoshop and lightroom installed and works, but when starting the creative program cloud says: no program installed, mand shows that old programs like SP6 to install

  Hello!

  When I start the creative cloud, information that any programs not installed and I can download SP6. But I installed the latest versions of photoshop and lightroom works correctly.

  My system is windows 7 64 Bit PC.

  I had to uninstall the program creative cloud because he didn t react a few days ago. Then I installed again and now I have this wrong behavior.

  Does anyone know how to tailor the program creative cloud correctly?

  Thanks in advance

  Andreas

  Make sure that you had not changed the language on creative cloud desktop

  Also try to perform steps below

  On the desktop creative cloud on the right side click gear icon and exit Creative Cloud App

  Then right-click on the creative cloud desktop shortcut and choose Properties.

  Then click on the Compatibility tab

  In compatibility mode ' ' make sure that ' run this program in compatibility mode for "check-box is disabled."

  If it is checked, uncheck it and click on apply, Ok. Then launch Creative Cloud application and try.

• The new Director of 4 Add-on firefox does not display any of my extensions, but they are all still installed and functional.

  When click on Firefox-> Add - ons, the new Add-ons Manager opens in a new tab. It shows the links to the page Get-addons, Extensions, appearance, Plugins and Scripts (for Greasemonkey) user in the menu on the left. All these excellent work except for the tab 'Extensions', which says that I have no extensions. However, in the lower right of the window, icons for extensions, I was using Firefox 3.6 appear as they did in this version of the browser. All my previous extensions are fully functional. Is there a way I can re - access the menu for the configuration/uninstall/disable them? Thank you very much to all those who are ready to help!

  You seem to have been using this profile with some testing of Firefox version according to the presence of many extensions.checkCompatibility. * prefs in your list of system details more.

  You may create a new profile as a test to see if your profile is the source of the problems.

  See:

  • Basic troubleshooting: make a new profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• New SSD - clean install USB 10.11.5 fails

  I have a mini Mac 2012 delay servier I use as a desktop computer. He had more storage that I needed if I swapped the boot with an OWC Mercury Extreme Pro 6 G SSD drive in the lower Bay, I left a second 1 TB drive 'data' in the upper Bay. The exchange took place without a hitch. I have rebuilt then key USB 3.0 I used initially do a clean install on the previous drive, with the latest version of El Capitan, I followed the instructions in this link: https://support.apple.com/en-us/HT201372

  I unplugged everything except power, network, monitor mini displayport and USB drive built above. I then start the USB key, select disk utility and erase the disc SSD - Mac OS extended (journaled) and name it MacIntosh HD. Then I continue with the installation by choosing MacIntosh HD as the startup disk.

  All apparently okay for about 5 minutes and then stops at "about a second remaining", he is sitting here for about 5 minutes and then goes to "0 seconds remaining", he is sitting here for a few minutes and then it reports "an error occurred during the preparation of the installation. Try to rerun this application".

  I experienced this about half a dozen times, after a few times, I've downloaded again the file install El Capitan and recreated the USB installation drive. I let it run all night and the result is the same, there is always activity in the newspaper, but same result. I also ran on the SSD health check after that deletion and he gets a healthy ratio.

  Before the error of the last entry in the log is "error writing to Volumes/MacIntosh HD/OS X Install Data / minstallconfig.xml".

  If I come back in disk utility after the MacIntosh HD volume error is more rose. I read that if OS X sees an SSD and a Standard disc, it can try to create a hybrid car, but you can skip this process and have just a SSD drive. I also see an entry in the log that the second disc "failed, volume-tick" because "this disk is used for Time Machine backups". (I have a backup disk of another computer).

  Anyway, looking for help. I'll copy the log for the next post, I can also call Macsales support but wanted to start here. Thank you...

  Edit: Sorry about the police, copied from Notes

  The paper is long enough, decided to wait to see if someone actually wanted to see.

  

• HP Elitebook 8560w: new SSD has NOT copied the partition HP_TOOLS... ?

  I have a complete clone of the drive C on the SSD. I don't have the HP_TOOLS partition and the hidden partition on the SSD recoverty.

  Do I need? How can I get them on the SSD?

  Thanks for any help you can provide.

  Nope. If it were, it would not work without them. Check and see if you can get into diagnostics UEFI tapping F2 you power up. I would check that. No need to run the computer, but you never miss it until you need it if you have a possible hardware problem. There is a program downloaded UEFI, you can install if necessary. There is no download Windows 10 but UEFI 8.1 Windows should work:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5071172&swItemId=ob_129420_1&swEnvOid=4158

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How can I find out what version of Windows 8 my new computer has installed, and it's a 64 bit version?

  I recently bought a new PC with a 64-bit architecture and Windows 8 is already installed.

  How can I tell what version of Windows 8 is?
  PAP

  Lower left corner of the screen.  Right-click and select System.  It will tell you the type of system, that will tell if it is 32-bit or 64-bit.

• Cannot get rid of 3 failure windows 'windows install' who quit with 96 percent finished, my printer hp psc 2110 is already installed and functional.

  Computer hp pavilion ze4900 laptop use with the Windows XP operating system and a range of printers hp psc 2110, both were Setup at the same time.

  Recently, whenever I turn on the computer, these windows are: firstly, they say '2100 Tour', then a '2100 Help Installer", then a"21-22-Trb '... "Please wait while Windows gathers information & configure 2100", then a line goes up to 96% completion and stops, after which nothing moves... as freezes.  I click next to them and they leave, but it happens every time I start.  Anyone has any ideas... Thank you!

  Hi Elizabeth,.

  This happens on reboot all? Check if the installation CD / DVD is in the drive. Otherwise you will have to click on Start-> settings-> Control Panel-> Add/Remove Programs-> your printer and click on repair.

  I hope this helps.

• A new Firefox was installed and now my email does NOT work. Why my email does not work?

  My email is comcast.net it stopped loading right after my Firefox has been updated. I need my email. Tell me how to solve my problem, OR I'll have to stop using Firefox. Thank you.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache. Note: This will be you temporarily disconnect all sites, you're connected to. To clear the cache and cookies to do the following:

  1. Click on the menu button , choose historical and then 'clear recent history... ". ».
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click on the "Clear now" button

  More information can be found in the article remove the navigation, search and download history on Firefox .

  This solve your problems? Please report to us!