Elitedesk 800 LTS G1 reboot on its own

Similar Questions

• TV reboot on its own

  Hi, recently new youtube app was loaded on my model of TV KDLHX850. Since then to the TV restarts on its own. Anyone else with similar problems?

  Connect the device to a different wall outlet. If the TV is connected via a power strip/surge, then try to connect directly to a wall outlet. If the problem is resolved, the problem is with the power strip/surge and not the TV.

  In addition, check if the clock/timer settings are enabled in the TV. If so, then try to turn it off.

  Ensure that the Firmware is updated to the latest version on TV.

  Don't the TV turns off immediately after having turned it ON or there is a gap between its reboot? If it takes a while to turn OFF by itself, then try to factory reset the TV.

  If my post answered your question, please mark it as an "accepted Solution".

• 800 LTS G2 Elitedesk: How to enable legacy boot on Elitedesk 800 G2

  Hi all

  We recently received a sample Elitedesk 800 G2 unit so that we can tailor our solution for OS deployment him before that people in our society early buying.

  We use the PXE-boot legacy for deployments so I wanted to set up the machine to make Legacy Boot and set the inherited from PXE first boot order.

  Since there is no documentation or the help that I could find, it is a process of trial and error.

  I finally managed to get boot inherited the machine by setting secure boot "Enable and disable secure boot" "Advanced" slot and allows the setting "secure boot claire keys»

  After a reboot, I was able to disable UEFI and configure the boot order inherited as you wish. Everything worked well.

  To validate the procedure I returned the machine back to factory defaults and tried to follow the same steps, but now the parameter 'start secured clear keys' are grayed out and I can't set 'enable and disable secure boot '.

  Anyone know how I can get back to boot legacy now? Any help would be greatly appreciated.

  I thought about it myself, it's for the benefit of third parties:

  to switch from secure boot UEFI Legacy Boot on Elitedesk 800 G2 (and others with the same firmware):

  F10-configuration of the BIOS

  'Advanced' - 'secure boot configuration', set 'key to secure clear boot '.

  Save & Reboot

  machine you ask for a code, enter it and restart.

  F10-configuration of the BIOS

  "Advanced" - "" secure boot configuration ".

  Select 'enable legacy support '.

  Save & Reboot

  F10-configuration of the BIOS

  Startup options: Disable 'UEFI boot order' and activate/configure "boot order of inheritance.

  Save & Reboot

  Yes, 4 reboots are required unless there is a quicker way that I don't know.

• An unknown audio program plays on top of the outhers. It starts on its own. She disappears for a while if I reboot. How to kill this nuisance.

  An unknown audio program plays on top of the outhers. It starts on its own. She disappears for a while if I reboot. How to kill this nuisance.

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If the computer is clean, use the the Task Manager or Process Manager to find out what is running if you can identify the program 'song' for you. MS - MVP - Elephant Boy computers - don't panic!

• 800 LTS G1 EliteDesk: windows 10

  I bought 15 of these EliteDesk 800 pc for a customer. The customer wants 10 installed windows, but there is no media installation for it. Do I really need to download and activate on every pc or can I clone after the 1 upgrade? Or is there a download for the windows recovery 10 install?

  Hello

  Again, you have to talk with Microsoft, cloning of 1 machine to other machines will not work. 10 Windows will check the material and will not work. Microsoft can only open the door for you.

  Kind regards.

• Elitedesk 800 g1 sff - cannot install windows 7 on SSD

  I have a new elitedesk g1 800 LTS.

  I would like to perform a new installation of Windows 7 Pro 64 bit on an SSD because I tried to clone but it BSOD.

  I try a new installation, its seen in the biso but when I boot from the cd it stops and can not find the HD during installation and I can't find the drivers to install to go further.

  Am I missing something?

  Win7 Pro 64 bit

  elitedesk 800 g1 sff

  BX100 crucial SSD 250 GB

  Any help much appriciated.

  Talked to HP and Crucial, the drive is not supported.

  Only supported discs are...

  Drive internal

  320 GB up to 2 TB SATA (7200 RPM)

  500 GB up to 1 TB SATA (10000 RPM)

  500 GB up to 1 TB SATA SSHD

  Up to 160 GB SATA SSD 128 GB

  256 GB SATA SED

  Limitation to say crucial HP for the reader is quite rare and replacement by the MX100 and MX200 discs like those are SEDs

• Why my MacBook Pro restarts on its own?

  Why my MacBook Pro restarts on its own?

  • Note the time of the next involuntary reboot. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of reset. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of a startup

• Stop laptop on its own and does not restart

  HP Pavilion dm4-1265dx shut down on its own.  Tried a normal reboot nothing helps.

  Tried to restart with diet only... then only to batteries... both without success

  Tried to push the start for 30 + dry with no battery/power button, then restart as online 2... Nothing helps

  looking for other ideas?  before requesting an autopsy

  Thanks in advance for any help

  Hey stueve2002,

  I'm sorry that you run in the no power problem! The first thing you want to check is your power cord. If the AC adapter is good (and it is plugged into a wall outlet good), turns the light on the computer next to which connects regardless of the State of the rest of the computer. Let me know if this (see the example below image) light or not.

  

  If it's light off, try a different outlet. Try one that has a work lamp or other device currently connected. If you have one available or try this adapter to another computer to see if it will fuel another computer, try another AC adapter. Check the connection of the DC end of the power cord in the power brick (big block in the middle of your power cord). Shake it and listen to the sounds of rattling. Check the entire cord for any damage.

  If this light is on, you see everything for example Caps/Num Lock lights flashing lights? If this isn't the case, does nothing when you press the power button? Don't you hear the fan, hard drive and the optical drive from spinning? The bright light? Nothing flashes on the screen?

  If you see signs of life at all (rotation of the fan, etc.), you can try to connect the computer on a secondary monitor to see if any picture on this subject.

  You can also try reinstalling the RAM. If you have more than one stick, try to use just one stick at a time in each slot to rule out the possibility of a bad location.

  Let me know what you find. I'll keep an eye out for your answer

• EliteDesk 800 800 TWR G1: > > > media presence check then no option to boot from

  Hello Sir

  I buy a HP EliteDesk 800 G1 TWR Telechareger pc. By default, Windows loded 8.1.I want to load windows 7 x 86 in this pc, so I inserct win 7 disc then reboot & system is restsrted ite system start-up

  > Media presence check then no option to start

  Please solve my problem

  Prabhu Prasad

  [Personal information]

  Immediately after turning the power on, press the ESC key. In the menu that opens, tap F9 Boot options.

  BTW you need to maybe get into the BIOS setup and disable Secure Boot to allow booting from the CD/DVD.

• Computer notebook Synaptics trackad pointer moves on its own-Looking for solution

  I recently bought a new laptop Hp M6 - N010dx, and the trackpad Envy Touchsmart is already in place.
  I installed the latest drivers for my pc, upgrade to 8.1 windows and twisted the sensitivity of the mouse, but I always have problems.

  Sometimes the pointer will become difficult to move on the screen and then will move its own. Again, to move its own, as in, I'm not in contact with the laptop at all. It's very frustrating.
  I can temporarily fix the problem or reboot my laptop or by writ put to sleep and then wake up again. However, I am looking for a permanent solution.

  Any ideas?

  I decided to return the laptop to bestbuy. I found that many users have had this same problem with the same model laptop and no "solution" offered actually work (I even tried myself without result). It's really a shame because I liked this laptop apart from faulty equipment... I am considering getting the x 360, but he mixed comments as well.
  This may end up being my last HP laptop that really, really bothers me because they are beautiful and affordable pcs

• Windows has a mind of its own?

  A few weeks before that I demoted Win.8.1 of Win8. I can't support either.

  Tonight, I get a message that my computer needs to reboot for Win.8.1 can complete loading.

  I never said I wanted to move to 8.1. Windows has a mind of its own

  and upgrades to the next version without worrying about whether you want it or not?

  Well, I guess I'm stuck with 8.1.

  This happened to someone else?
  Bob

  It apparently * a * is happened to others, even though I have yet to see it happen first-hand (or with anyone I help/manage personally who chose to not move to 8.1 for a reason any.)

  If most of the 8/8.1 aversion is the interface - 8.1 is the best choice because it gives more options to customize without know entirely too much about the inner workings.

  If you don't mind a suggestion - check out the first post in this discussion to see if some of the suggested changes would help you with your discomfort with Windows 8.1 or not...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-desktop/modifying-Windows-81-for-those-who-want-to-ease/47425a3a-a652-4d0a-9537-68d36fa36947

• Why my iMessages are showing on my camera of husband? It has its own Apple ID?

  Why my iMessages are appearing on my husband's phone? It has its own Apple ID.

  Ano also its (incoming and outgoing) calls on iPhone 6Plus S show on his iPhone 6s.

  Thank you

  Apparently, both phones have been implemented with the same iCloud account.

• I have an IMAc running on the latest version of El Capitan. MY blutooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear.

  I have an IMac running on El Capitan 10.11.6. My bluetooth followed pad has a mind of its own - opening windows and text highlighting / deletion.  In addition to this my screen keeps freezing and the spinning ball will appear - I have to hold down the back of the screen to force it to close.  This message of the 2 line took almost an hour to type as I have no control on the touchpad.

  Hello Kluggerjo,

  Thank you for reaching out to the Community Support from Apple. I know how important it must be able to count on your devices work as expected, and I have a few steps that should help resolve the behaviors you see.

  I would recommend to go by resetting your management system (SCM) controller. MSC helps control and regulate different material on your Mac, including Bluetooth systems.  This article will guide you in this process: reset the management system (SCM) controller on your Mac.

  If you still experience the issue after the test, you can test the behavior to a test user. This will help us to determine if the problem is systemic or isolated to your user account. This article will guide you in this process: How to test a question in another account on your Mac user

  If the behavior is duplicated to the test user, I'd recommend reinstalling El Capitan. This will not delete your data. To reinstall using the recovery mode, take a look at this article: How to reinstall OS X

  If you experience any problems or have any questions, please let us know. The entire community is here to help.
  -Best regards

• selectingitems and trackpad pointer moves its own

  I was watching a video of Amazon and may have struck a couple of keys, or my hand slipped in the keys - I don't know, but pointer froze on the follow-up to the film bar at the bottom of the screen (not sure if this is relevant, or what is called in fact this bar) in all cases, the pointer froze and then began to move erratically in bursts on the screen , selection of apps, ibooks, photos, etc. and then OPEN them as if I had clicked. Literally goes haywire as if it had a life of its own. I have NEVER experienced this during the 11 years that I've had the Mac laptop. I don't know if trackpads wear out (my current MacBook Pro is a vintage 2012 and I debated update, but it was working very well.) I wonder how to clean the dust/debris under keys because I know it can be done and I was wondering if something got under the trackpad (seems pulled by the hair) but it's really another question for me to continue. Any help on trackpad possessed pointer would be appreciated. I don't see that this issue anywhere else... - Pam

  Remove the bottom plate and inspect the inside.  Pay attention to the battery to see if there are signs of expansion.  If so, take it out and have a new installed.  An extended battery can affect the trackpad.

  If no success, make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• My albums Mac Office keep shut on its own no one knows what may be the cause?

  My Mac keeps closing on its own after start for several minutes.  No one knows why this happens (IE Captain)

  It can be / or think that it is overheating and he's trying to protect themselves.

  We the iMacs at work did after that we replaced the HD and a new has a sensor on it. We had to download a software solution to work around.