selectingitems and trackpad pointer moves its own

Similar Questions

• 9.0.2 CF multi server config, IIS site uses the connector bad, how do I change the connector to point to its own instance of CF

  Hello

  Yesterday, I found that an IIS site that is supposed to be connected to its own instance of CF is actually connected to another instance of CF. Our configuration is the following

  Windows Server 2008 R2, Coldfusion 9.0.2 Multi server enterprise edition, IIS 7

  Instances of ColdFusion: P1, P2, V1

  Clusters: Primaire1: contains P1 & P2

  Site1 IIS Web site is connected to the Cluster primaire1

  Site2 IIS Web site is connected instance CF V1

  I myself stopped instance CF V1, but IIS V1 site was still running. After much digging, I found this site V1 is not actually connected to the CF P1, an instance of CF V1 instance. I used the web site1 at CF instance V1 connection configuration tool. In IIS the JWildCardHandler site1 points to \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. JWildCardHandler for site2 points to the same directory \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. Here is my dilemma. How can I get JWildCardHandler site2 to point to its own folder under \JRun4\lib\wsconfig, say 14 instead of 3. I don't want to use the web config tool becauseI don't know if it will delete the folder ...\webconfig\3 if another site is still using it. I saw the web configuration tool remove the folder when you remove this connector in the tool.

  So I thought that I would try to manually configure the connectors. That's what I did

  Copy the folder wsconfig\3 wsconfig\14

  en...\wsconfig\wsconfig.properties - ensured site2 exist and referenced instance CF V1

  ...\wsconfig\14\jrun_iis6_wildcard.ini

  serverstore = /JRun4/lib/wsconfig/14jrunserver.store

  127.0.0.1:51007 = bootstrap - 51007 is the port of the proxy that the JRun Management Console is instance CF V1

  ... \wsconfig\jrunserver. Store

  proxyservers = (in file #3 set for P1 and P2 proxy ports)

  
  

  Then, I went into IIS and changed JWildCardHandler from site2 to \JRun4\lib\wsconfig\14 \jrun_iis6_wildcard.dll instead of \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll. After you restart IIS sites site1 or site2 came. I went back in and came back JWildCardHandler back to the \JRun4\lib\wsconfig\3\jrun_iis6_wildcard.dll site2 and they both come. I think that I restarted CF both times, but really forget that I was in a bit of fashion panic.

  
  

  Is that what sounds like it should work? Does anyone know of any files that I missed trying to configure site2 to point to the CF V1 instance? Any ideas are appreciated.

  
  

  Joe

  
  

  What I understood why 2 Web sites were using the same instance of Coldfusion. 2 Web sites share the same files, sharing the same web.config file. Change the JWildCardHandler, in IIS, for a website has changed the web.config file that is shared by both sites. If I find a way around it, I'll post my solution in case anyone else runs into this situation.

  Joe

• pointer rolls randomly and moves its own

  Original post: runaway pointer

  My pointer has developed a small rectangle 3celled which appears at its end and makes the pointer carried on with a mind of its own. It also makes my uncontrollable roll screen.

  Says MSFT security essentials I am free from viruses and malware.

  What causes this?

  How can I stop it?

  I have windows XP w/SP3

  laptop Gateway

  Thank you

  grampsny

  Hello

  Click on the link below and see if it helps.

  http://support.gateway.com/support/manlib/cmponts/kbdmouse/8508818/08818.htm

  Hope this information helps.

• Portege Z series - the mouse cursor moves its own

  When I start my series Portege Z the cursor of the mouse moves by its own. Alfer several minutes (less than an hour) it stops and it works properly.
  For your information on the laptop, the Antivirus is installed and updated: AVIRA and Spybot

  What I tried to solve the problem:
  (1) I downloaded and installed the latest version of the pointer ALPS driver device that even so the same version was already installed. No result, same behavior
  (2) I tried with an external USB mouse, disable touchpad/pointing stick. No result, same behavior

  Suggestions, please?
  Thanks in advance

  Maybe you can try to start with a Live CD/USB. If this problem occurs also with the OS Live the question is related to laptop. If not, it s a Windows problem and perhaps a recovery would solve the problem.

• Microsoft 'Fix - it' created a restore point of its own

  I downloaded microsoft "Fix - it" and he has made a point of restoration of its own and does not allow me to go back further.  I have a problem and need to restore to an earlier date. I uninstalled Fix - it, but the new always restore point allows me to go further.  How can I remove Fixit restore point without format my whole computer

  System Restore is not a panacea.  Why do you want to use a previous system restore point?

  Sometimes the system restore fails, usually when you most need.  For this reason, some people don't rely on the system restore and make their own backups instead.

  In order to back up the registry, C:\WINDOWS\ERUNT is both free and easy to use.

  For more full backups, you must decide whether to back up only the data or the entire system.  It is easy to back up the entire system using a disk cloning/imaging application.  Here are a few:

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  XXClone

  Finally, to help with your particular problem of restoring the system, start here--> http://bertk.mvps.org/html/srfail.html and http://bertk.mvps.org/html/error.html and http://bertk.mvps.org/html/tips.html

• I bought my daughter a 5 c for Christmas and she configured with its own Apple ID but she is only 9, so it's by my acct as a member of the family, but when I send txt messages she gets a copy as well! Anyone else has this problem, or can help thx

  My daughter, I bought an iPhone 5 c 8 GB for Christmas, she is 9 years old and has created its own Apple ID through the iCloud but it is attached to my Apple ID and I get txt messages if she wants to take down an app that's 12 rated apple wonder if it is allowed. When I send txt messages my daughter gets a copy as well, and also the answers, has anyone had the same number? Can anyone help solve this, thanks in advance

  Try going into settings, messages, send and receive and see what is there.

• Re: Mouse cursor moving erratically and even moves its own

  Hello. I hope you can help.

  I have a Toshiba Satellite U500, less than a year and I have real problems with mouse cursor move where he wants, when he wants, even when my hands are away from the laptop. I ran every virus/trojan/software malware scan and there is no problem. Tapping is disabled and sensity etc. levels are low. I use Windows 7 and there is no problems until the last two days (apart from an occasional hour or two the same thing a few months ago.

  Oh and I don't have an external mouse. only the Toshiba integrated one. Any ideas? He made work very difficult.

  Thank you very much.

  Hello

  try updating the driver for the touchpad:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  To be honest, I do not know what you suggest again that you have already scanned for viruses, disabled tapping, sensity levels. As it is the last hope to reinstall the operating system itself with a recovery disk

• How to cut a shape of the object a picture and put it in its own?

  Photo cut and save

  How to cut a headshout of one person on a phot with several people in it and then save it as it's own photo?

  You might cut back on the part you want to save as a
  new photo.

  (be aware... If the original photo is not high quality...
  your cropped section can be grainy)

  Many photo editors have the ability to crop but since
  I don't know what you have installed... I'm going to suggest
  Windows Paint... (Start / Programs / Accessories /)
  Paint) to help you get started.

  Try to open the picture in paint.

  File / open... Find and select your photo.

  In the top left panel, left click the Select button.
  (looks like a rectangle made up of points)

  Left click / drag a rectangle around the portion of the photo
  that you want to copy.

  Now, you'll see a dotted line around the selected area.

  Reach... Edition / copy.

  Reach... File / new.

  Reach... Editing / paste.

  Reach... File / save as.

  Choose a backup folder.

  Enter a name.

  Choose a format (JPEG).

  On the left, click on the "Save" button.

• Precision touchpad 7510 periodically freezes, the cursor moves its own

  Just got a new Precision Mobile Workstation 7510 a week ago. Out of the box and before installing updates or new software, the touchpad randomly every minute or so, stop answering the entry and the cursor would be very slowly thumbs itself (usually slightly crawling upward and to the right). This would happen for anywhere from a few seconds to 10 or if, before the touchpad would start working again. No change in the past week.

  The pointer stick works as usual at the time the touchpad does not.

  I tried all of the suggestions I found recommended or would think:

  • Reinstalling Windows from the original image (did this two times)
  • Reinstall the driver (I already had the last being, but I also well reinstalled and then removed and reinstalled version freshly downloaded from the latest version provided on Dell.com)
  • Disable the pointer stick
  • Deactivation of gestures
  • Unplug all devices, including the power adapter
  • Restart in Mode safe (persists, although maybe the normal touchpad driver is still loaded in Mode safe)

  I was about to call Dell (I support Pro) thinking that it is a problem material, but interesting, there is no sign of trouble in the compatible installation screen mouse Dell GUI BIOS. I guess if it's a hardware problem, it would still appear there.

  FWIW, the icon of Dell touchpad in the toolbar State system sometimes, but not always, poster touchpad entry at the center of the touchpad when this happens. The movement of the cursor is very slight - at a rate of a few millimeters to each instance, for a total of about an inch of arrow for more than 10 minutes (I'm looking at do it now while I have this post from my old machine).

  Suggestions for anything else to try before I call support and schedule a call for a touchpad/palmrest of replacement?

  Don't want to jinx it, but... it's been about 24 hours that the tech came out and replaced my touchpad and things worked great since then.

  It seems that it was a material that delivers a replacement is resolved.

  Thanks to Terry for configure sending tech support without making me go through all the hoops to talk to tech support. I have long been happy with Dell ProSupport, but Terry help me set up just to do very easily. Thank you!

• When I put the computer on the mode 'sleep' it goes into sleep mode and then restarts on its own.

  Have Vista Home Premium. When I put the computer on the mode 'sleep', it closes and moves to the State of low consumption with the screen. But in a few seconds without touching the key or mouse it starts again. What is going on?

  Hello

  See if this information helps you:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• We have 2 people sharing account iCloud... added a new application that poses problems for iPhones. Can I separate and give each phone its own iCloud account?

  Problems after installing an application on two phones with a shared I have cloud account. One phone receives calls. Remove the application on the phone in question but continued to receive calls. should I individual iCloud account to resolve this problem. The app is text & Talk for private plane wifi messaging and talk.

  Ideally boards should not share accounts iCloud

  However - that said if interchanging receiving calls is the only question

  Settings - Phone - calls on other devices - OFF toggle

• My cursor moves its own

  I have a new computer with Vista Home Premium on it.  The problem I find is that when I am typing in emails and reports etc, I find suddenly that the letters are included in the previous sentences, paragraphs or just moving on different lines.  It's very frustrating because I keep having stop, fix the text and then continue.  Can anyone suggest why this is happening. -I had to stop 8 times while typing in this little piece of text to set it right.

  Hi Wendylb,

  It lists 32 and 64-bit.  The platform you are looking for is x 86.  I downloaded the patch and got the 32-bit version.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No changes but my screen goes black and computer stops on its own

  This has just begun. Screen goes black and the computer shuts down. Is also off sometimes when I try to wake him up.

  Hello Mary LouJoseph,.

  Click the link for the who might help with your problem of black screen.
  This is whyis my screen black when I start Windows 7?

  Let us know if that helps.

  Marilyn

• Playhead drag's playhead to move its own

  Is there a solution for mounting apparent meandering slider first?

  My calendar of cursors cursor, source and playback are repeat my mouse gestures and I can't turn it off.

  This has happened since the update to El Capitan on Mac. I don't care who's fault it is, but what is the Adobe solution, please, already?

  Thank you

  Title edited by Kevin Monahan

  Hi TREW,.

  I haven't updated the operating system and the software still no dice. Y at - there a patch or something?

  Premiere Pro CS6 development completed in 2012. That said, it will not patch for CS6. Sorry for this bad news! I suggest you to downgrade the operating system.

  Thank you

  Regalo

• CS6 on Windows 7, when I try and send my project Adobe Link, then I still repeatedly get the error message "still has stopped working, windows closes the program.  I get the same error message when I try and open again on its own.  Help Woo

  Also when I open again as a standalone program, and when I try and export my work via Adobe link to send to again, I get the same error message - "Adobe Encore has stopped working.  Windows will close the program.  Help would be really appreciated.  Thank you.

  Run 'as administrator' If your account has administrator privileges or not.

  Let us know if that suits him.