eMachines EL1300

Similar Questions

• Satellite Pro P875 will not display on '3D ready' 3D projector emachines V700

  Hello

  I am struggling with the display of 3D on a 3d ready projector emachines V700.
  I tried different software, stereoscopic player, CyberLink DVDPlayer 12 without success.

  CyberLink DVDPlayer is configured to use the Intel card - which will not limit its possibilities to use the 3D Vision NVidea support?

  On the NVidea Control Panel, the option for the specification of the graphics card is grayed out and configured for the use of the Intel card, for all CyberLink programs.

  The error message I see, is that the software can not enable 3D support. I used the mode "120 time sequential 3D LCD.

  The Toshiba Bue Ray Player has yet identified the Blu Ray in 3D, as it seems.
  It shows 3D blu ray than 2D and 3D button is grayed out.

  I have:
  Toshiba Satellite Pro P875
  HDMI cable
  EMachines V700
  Shutter 3D glasses: Hi Pro shock

  Hello

  From my point of view, you can use this capable 3D projector as part of the nVidia 3D vision.

  http://www.nvidia.co.UK/object/3D-vision-main-UK.html

  As I m not wrong not the display/projector must support 120 Hz and must be set to 120 Hz in order to use the 3D side-by-side mode.

  In addition you need a compatible software/player stereo standard (for example 3D VISION video player)

• Exapnd eMachines with AMD x 86-64 Semperon le-1200 RAM

  Original title: AMD x 86-64 Semperon le-1200.

  The motherboard is the gateway is Sempron le-1200 is x 86-64 bit, AMD socket AM2 940 on eMachines W3644. Is it possible that eMachines W3644 can adapt it to 3 GB or 4 GB for a loan of 64-bit? Since then, it's 2 GB of RAM, but a little short of memory.

  Hello

  Is this related to this question about your computer eMachines in the Windows 7 Installation Forum?

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/eMachines-w3644-upgrade-debate-to-Windows-7-32-64/4d057543-53d4-44ef-8418-c989a09ffb4b

  Put more RAM in will not change if she is fit to run a 32-bit or 64-bit operating system.

  See you soon.

• Question about RAM for eMachines 633ids

  Hello

  Just bought an eMachines 633ids work today. The PC is old and it came with 64 MB of SDRAM. I have an eMachines broken T1742 with 128 MB of RAM. I was wondering if I could put the T1742 broken in the new 633ids RAM. It will work and is it safe? I don't know if RAM of the broken T1742 is good because the motherboard is shot. Do I just buy new RAM for the 633? If so I wouldn't mind putting money into it because it is in perfect condition. I paid $15 for it.

  Thank you.

  Don

  They wont even fit (see shears) the good news is the ram for 633ids (128 MB which is max) when you can find it (google it) is about $20

  

  

• My Emachines E525 freezes frequently.

  I have acer emachines E525. It keeps stuck a lot. The system stops working and after a few minutes, it will return to normal. Especially, sometimes while I use the browser. What should I do?

  Check if you have updated the drivers installed, you can check new drivers on the Acer site.
  If still work using System Restore, and scan with a good antivirus software.

• When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  HELP me get my E mail.

  When I turn on my emachine and try to check my e-mail, I get my homepage to google for about 1 second and then the screen turns white with bee.pl.

  http://INFOTEP.bee.pl/info.php?avted=;     I'm not that day on computers, and many of their functions and a few times I get a little lost in there so if anyone can help me I really appreciate it.    Thank you!!!

  Hello

  1. what operating system do you use?

  2. What mail client do you use?

  3. you have made any changes to your

  4. what site you're talking about?

  5. How do you access the webpage?

  6. you use Internet explorer or another browser to access the site?

  The link give http://infotep.bee.pl/info.php?avted takes me to a blank Web page

  Are you referring to http://www.bee.pl/index

  Refer to the following, who says that the sites host malware

  http://www.Google.com/SafeBrowsing/diagnostic?site=monidopo.bee.pl/

• I have an emachine and a disc stuck in the tray, it will not eject

  computer eMachine will not eject a disc

  I'm sorry, but I think you're in the wrong place, this forum is about the Windows Phone 7 smartphone. Maybe try http://answers.microsoft.com/en-us/windows? (Although I don't know what an emachine, so I don't know if it uses Windows.)

• I have an Emachine and a Brother printer, cannot install the printer

  I have an Emachine with Vista, AVG security.   Had a Brother printer.  Printer has worked one day, wouldn't work next day.   Computer won't let me uninstall or reinstall, nor can I do a backup now.   Took and said it was the printer, the new printer, same story.   What is going on.   I am po'd when I call a number of aid and get some yahoo in India.

  Hello

  1. what exactly happens when you uninstall and reinstall the printer?

  2. you get any error message?

  3. how you try to install the printer drivers? (With the help of CD or by downloading the driver)

  4. What is the number of the printer model?

  5. What is the model number of the printer that you bought?

  6. How are you trying to backup?

  7. are you any errors during the backup?

  Please see the article mentioned below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001500/000009/faqp001509_000.html?reg=us&c=us&lang=en&prod=ql1060neus

  Please download the removal of printer tool suitable for the model number of your printer

  Click on the link below.

  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faqp/000000/001400/000038/faqp001438_000.html?reg=us&c=us&lang=en&prod=ql1060neus&cat

• the emachine E627 have bluetooth built in please

  I just wanted to know if emachine E627 had bluetooth built into the laptop, if not how do I instale bluetooth

  Hi Tony,.
  First of all, let's get this message to the correct forum. This thread has been created in the Microsoft answers Site Feedback forum. the Microsoft moderation team has moved this thread in the hardware forum and drivers so that this issue can receive the proper attention.
  Second, no. The system does not have a blue tooth built in connection.
  http://support.gateway.com/eMachines/notebook/2009/eMachines/EME/eme627/eME627sp2.shtml
  hope this helps,
  Eddie B.

• Keyboard: Keyboard Acer not supplied with computer Emachine model no ET1862-AT899.

  Device: Not supplied with computer Emachine Acer keyboard model no ET1862-AT899.  When I hit SHIFT + AMPERSAND quotes will appear.  When I hit SHIFT + COMMA INTERTED thenampersand appears.  It is the ampersand and quotation marks are justaposed while only the tiny (2 and apostrophe) are not.  The keyboard is defective?  If not, how to fix?

  Hi Peter,.

  Is this a new problem or was heppening since you have the keyboard? From what you describe, my first thought is that it's a faulty keyboard. You can check with the Acer support page, because they might have a solution to this problem.

• window menu and the welcome eMachines window continues to display

  I keep getting a window on the lower right of my monitor that says thank you for exploring the emachines E19T6W LVD wide screen display.  He invites me to take a turn produces what I did. There are buttons on the side of the monitor to "next" and "end turn". I drill these buttons and the window disappears for a while, but the blowback on andoff contiunes. Very annoying because it covers part of the screen. This has happened in recent weeks.  The monitor is not new - I've had it for about 2 years...

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• I using Madden 2004 and Emachine with windows Vista aT5064. It will not install on second disk

  I using Madden 2004 and Emachine with windows Vista aT5064.  disc, it will bring up a screen with options for more information, installation, play, udate and quit smoking.  When I drive during installation it says unistall, when I choose the game he wants the game disc, when I put in the second disc there is an error asking if I want to play the game without sound (check the drivers) and when I choose Yes

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?

  Original title: upgrade of Microsoft XP on an emachines T3830 Dell

  What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

  What is the best version to use when upgrading Microsoft XP on an emachines T3830 Dell?  You said to go to Vista or Windows 7, I don't know which one to choose.

  Hello

  eMachines is owned by Acer, Dell No.

  Here is the information IF you ever want to upgrade a computer to a later version.

  But I can advise you that your eMachine is capable of running Windows 2000 and Windows XP.

  http://www.eMachines.com/EC/en/us/content/drivers.html

  Put your model number in the link above > then search under operating system, provided drivers

  @@@@@@@@@@@@@@@@@@@@@@

  Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

  There is no update free from XP to Vista, 7, 8.1, or 10.

  Forget Vista as support extended for Vista SP2 will end April 2017.

  Follow these steps before you buy Windows 7; Windows 7 SP1 to support extended to January 14, 2020.

  Microsoft sells more than 7; Try Amazon.com.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@

  Follow these steps before buying and upgrading (new installation) of Windows 8.1; extended support ends on January 10, 2023.

  Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

  If this is not available, Windows 8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  "Update to Windows 8.1: FAQ".

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@

  How to buy Windows 10; extended support ends 14 October 2025:

  http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  " System requirements Windows 10"

  https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

  Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

  "FAQ Windows 10.

  http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

  See you soon.

• Need XP disc for eMachines T3516A

  I have a new, but 6 years old, not registered emachines T3516 that was bought as a back-up.  I decided to save up for my daughter, but miss me the "operating system MS Windows XP Home Edition emachines disk".  eMachines have this disc.  I thought that this drive would be necessary when setting up the machine and so I haven't started.  Where can I get a copy of this disc and it is really necessary?

  Hi stonerod,

  You will need the Windows XP installation CD to install it on the emachine computer and configure the computer.

  Unfortunately, Windows XP CD are no longer available for sale, you can contact any store local tech or with eBay or amazon, you can check if they have copies left.

• Need drivers for eMachines W3650

  Hello

  I need some drivers for an eMachines W3650.

  When I try to change my display settings of 1600 by 1200, it says "cannot display this video mode". It does the same thing for 1920 in 1440, which meant that I can't use a screen with this PC and I need to.

  Here's what the device manager says is false:

  

  When I click on 'Properties' on devices with an exclamation mark, he said.

  The drivers for this device are not installed. (Code 28)

  To reinstall the drivers for this device, click on reinstall the driver. »

  So I click "Reinstall" and he says that it cannot find the drivers.

  Of sleep is also greyed out.

  I need these drivers if anyone can tell me where I can find them? eMachines has more the latter on their Web site (eMachines is no longer in operation)

  Help, please.

  Thank you.

  DA

  I would Google you

  http://DRP.Su/drivers/notebooks/?v=eMachines&m=W3650&ID=37539&l=en