emailing and the opening form

Similar Questions

• Restriction of the open form

  Dear all Assalam-o-check.
  I use the procedure to open the form in the MDI window, toolbar by default oracle is also attached to each form of oracle. I am facing the problem, when I open the two form and enter the data on the two form one by one, after pressing the stop button, except data on both forms, whereas it should save the data on the active form. What should I do for this.
  
  Thank you
  Best regards
  Farrukh Shaikh

  Change the setting of Session in default SESSION OPEN_FORM its NO_SESSION which means that all your forms will open in the same session

  PROCEDURE OPEN_FORM
    (form_name      VARCHAR2,
     activate_mode  NUMBER,
     session_mode   NUMBER,
     data_mode      NUMBER,
     paramlist_id   PARAMLIST);
  

  session_mode     NO_SESSION  (The default.)  Specifies that the opened form should  share the same database session as the current form.  POST and COMMIT operations in any form will cause posting, validation, and commit processing to occur for all forms running in the same session. 
  
  SESSION  Specifies that a new, separate database session should be created for the opened form.
  

  Please check correct/useful if it is

  Baig,
  [My Oracle Blog | http://baigsorcl.blogspot.com/]

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but

  Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but I can't it to work on the laptop.

  I downloaded "New tab Pro" on the laptop (do not even see on desktop computers so don't think about) such that she was like the real deal but nope... do not work. Running the latest version of MF, ideas on how activate it please?

  Thank you guys are going to mark as 'resolved' BTW it is no "folder on the desktop named old data from Firefox. Hmmmmmm.

• Why in the context menu of the "open in a new tab" and the "open in a new window" - buttons change of place? And you can change it back?

  With the Firefox 4 RC, the 'open in a new tab' and the 'open in a new window' - buttons have changed places. This is quite annoying because I normally do without looking, but now it always opens in a new window instead of a new tab. Is it possible to restore it? Perhaps in your own settings?

  You can use the menu editor extension to reorganize menu items - https://addons.mozilla.org/firefox/addon/menu-editor

• What is the reason for the Photo and the opening

  What is the reasoning behind the Photo and the opening?

  Not sure about the reason behind the question. Do you mean as a consumer? If so, note that Aperture is more developed. Photos has a whole new system of Apple's Mac OS software. So if you do not delete opening and he already bought, it is present until you remove them. Photos is there because you upgraded to a recent Mac OS, or bought a new machine.

  If you want to use the two depends on your needs, which we do not know. Opening is a much more complete edition and management of solution of Photos, but is older and as I said, eventually will no longer work.

• whenever I click on a program, that it does not open and the 'open with' screen appears

  whenever I click on a program, that it does not open and the 'open with' screen appears

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

• Whenever I go into emails, after the opening of two or three I have thunderbird no longer responds. (Operating system for several months) CAUSE: unknown. Disappeared after the reboot.

  As stated in my question, that this is the case whenever I open emails. After opening with two success or three, I get the message not responding when I try to open the following. This has happened for a long time and is very frustrating.

  Hi Wayne. Thank you for answering my question. I said, that your answer is not

                    solve my problem because I couldn't understand what any of it meant. We usually leave our computer on all the time and a friend who is more savvy than I suggested we turn it off for a while. This seems to have worked.
                            Cheers.   Stephanie.
  

• BlackBerry smartphones mark several emails and the navigation quick screen

  Ask yourself if someone more familiar with the BB products know if there is a key that can be pressed to quickly mark a msg email from the "headers" page so that I can score a lot to delete or mark as read?

  Also, I discovered that pressing "space" jumps to the bottom of a page at a time but y at - it a key that will end or the beginning of the list?

  THX

  Phil

  If you hold down the key CAP (or SHIFT) you can scroll the trackball to select groups of messages. If you want to select messages based on the date, you can click the date field. In, you use the first method, you can simply press the trackball again and in the menu, you can choose Mark Opened or delete Messages. If you click on date then you can choose Mark prior open or remove beforehand. Making one of these 2 things will remove or mark all previous emails open up to and including the date you selected.

  To go to the top or the bottom of a test page using the 't' and 'B' keys respectively.

• Dynamic subform does not arise after the registration and the opening.

  After that I have to fill out the pdf, save it, and open, the dynamic subform does not appear. There are currently 2 subforms that are controlled by checkboxes and function in the following way:

  -If the box "no" is checked, the subform "SubmissionNo" should appear, the subform "Submission" should be hidden, and the 'Yes' box should be unchecked

  -If the 'Yes' box is checked, the subform "Submission" should appear, the subform 'SubmissionNo' should be hidden and check 'no' must be deselected

  The two boxes to check by default being disabled and record properly, but after I close the pdf file and then to open it, the appropriate subform that should be displayed is still hidden despite the 'yes' or 'No' checkbox being checked.

  I have the following script in the docReady of SubmissionNo:

  if (noCheckBox.rawValue = 0) {

  This.Presence = 'visible ';

  }

  else {}

  This.Presence = 'hidden ';

  }

  and I have the following script in the docReady of presentation:

  if (yesCheckBox.rawValue=0) {

  This.Presence = 'visible ';

  }

  else {}

  This.Presence = 'hidden ';

  }

  Two things:

  Your if statements are not correct - you need two equal signs to test a value not one. So, If (noCheckBox.rawValue = 0) should be If (noCheckBox.rawValue == 0)

  In file > properties of the form on the Defaults tab make sure that 'keep changes scripts... ". "is set automatically on.

• Calculations in APEX 4.2 on the interactive report and the update form

  Hello

  I know that people have asked similar questions, but I was not able to do this work. I'm doing some fairly simple math (addition, multiplication) in an application. I have 2 fields (VALUE_A, VALUE_B). I can get the addition and multiplication work in the interactive report, but I also need that it works correctly in the form of update. I also need update form to work dynamically so that if the values are changed, the correction calculated response is shown immediately on the update form and then reflected in the interactive report. I tried the dynamic action, with and without javascript without result. Any help would be appreciated.

  Request Express 4.2.6.00.03

  model application:

  https://Apex.Oracle.com/pls/Apex/f?p=82162:

  username: guest

  password: Peanut123

  Thank you

  Rachel

  ADD dynamic action

  After refresh of region

  Set value

  ELEMENT the VALUE to change

  check the fire on the load

  To source, use expression JavaScript

  If ($v ("P2_TEST_1")! = null & $v ("P2_TEST_2")! = null)

  {

  parseInt ($v ("P2_TEST_1")) + parseInt ($v ("P2_TEST_2"));

  }

  ElseIf ($v ("P2_TEST_1")! = null & $v ("P2_TEST_2") == null)

  {

  parseInt ($v ("P2_TEST_1"));

  }

  ElseIf ($v ("P2_TEST_1") == null & $v ("P2_TEST_2")! = null)

  {

  parseInt ($v ("P2_TEST_2"));

  }

  on the other

  { 0; }

  That add another dynamic action on change POINT P2_TEST_1 and set even with the same expression JavaScrit action. but NOT fire on the load
  Do the same for the ARTICLE P2_TEST_2

  And the same for A times B but change + to *.

  Here, I did samples for you with this code.

  https://apex.Oracle.com/pls/apex/f?p=83519 demo/demo

• Mail send and the body of the email and the attachment to ATG.

  Hi all
  
  Can any body explain to me how I will send an email with the body of the email and attachments in ATG.
  
  Thank you
  Chadnra mohan

  You can use atg.service.email.MimeMessageUtils or javax.mail.internet.MimeMessage (both are under Message classes).

  You can set the body to aid below extracted.

  Message MSG = MimeMessageUtils.createMessage ();
  msg.setText ("your body of the email");

  You can define the setting and the content using below extracts.

  define the content of the message: message to multiple parties + attachment
  ContentPart happy [] =
  {New ContentPart ("it's clear","text/plain" ""),}
  {New ContentPart ("this is text html" , "text/html")};
  Attachment of files = new File ("attachment.html");
  MimeMessageUtils.setContent (msg, content, seizure, false);

  All of these are clearly explained in the link below.

  http://docs.Oracle.com/CD/E24152_01/platform.10-1/ATGPlatformProgGuide/HTML/s1013creatingjavamailmessages01.html

  Thank you
  Gopinath Ramasamy

• Export the properties and the related forms of a category of properties

  How to export all properties and their formulas for a particular property category. The reason why I want to do is to identify all the formulas where I used a good cause I do some changes to the same property. I want to make a list of all the accessories that need to be changed to.
  
  I'm sure there is a way to extract the database but don't know how to do that like the tech aspect of MDM is still not one of my strong suit.
  
  Thank you
  
  Tanuja

  Hi Tanuja,

  I don't have the exact answer to your question, but I guess I can hit it close enough.

  There is a way to document your possessions (practically everything you have in your design DRM) using the Migration utility that comes with DRM. This includes the categories of system and the property, properties, preferences, etc.).

  This should certainly help you with this question:

  1. you can go to your migration utility (http://localhost/mdm_migration)
  2. go in the option extract - here you can see the different options and click on what you want.
  3. you can play around with the options/filters you have and then run extract.
  4. download the metadata file when the extract is complete.
  5. what you have now is an XML file that is sort of pointless, BUT you can sort of convert in Excel--> you can drag and drop the file in an Excel workbook and "add as an XML list.

  6. you should have a fancy Excel file now with all documented (so much better than the manual documentation).

  I hope this helps.

  -Adi

• Scan to email on HP7520, get the email and the attachment, but there is no file as .pdf extension name

  Hi I had my HP 7520 newly, first when I was scaning for email (gmail), I have no attachment at all. I removed the power and reconnected to the eprint service then and it worked fine for a few days.

  Now a new problem is coming, the arraives of attachment, but it is with file extension. So I need to download again to the computer. And rename "Filename" "nomdefichier.pdf" to be able to open it.

  Anyone have the same experience? Or have I done something I shouldn't?

  Hope sombody can help me

  HP have solved the problem, the analysis at the service of e-mail on their server has been resolved. It was a problem of HP online. Its now fixed. Hope it stay that way, because it is a good all in one printer.

  Thanks for all the messages of good in this great work of thread!

• reCAPTCHA does not send emails to the address form

  I installed a simple form for people to subscribe to a newsletter, I've included reCAPTCHA. I went to Google and got codes inserted in the form. The e-mail address that is to receive the information from the form is part of my field. I tried several times and with several email addresses, but I still have not received a single email yet. Can someone help me or if anyone else has had this same problem.

  Hello

  Please visit this link

  Diagnostics Muse PHP

  It seems that your server is not configured correctly, contact your host and let them know about the SQL configuration problem

  only they can fix. You can get additional help with this article

  Troubleshooting Muse form used on the servers of third party Widgets

  Let me know if you have any question.