Can Tecra A8-143 - I use DDR2-800 RAM?

Similar Questions

• SL300, brand Compatible DDR2-800 Ram

  Hi, after reading the forums and the internet I think the SL300 are compatible with DDR2-800 ram.

  Would users with ram DDR2-800 in their SL300 be kind enough to post the serial number and model?

  I would like to upgrade mine to DDR2-800 because it's cheaper now than the DDR2-667, and I can't wait to squeeze the last ounce of performance out of it.

  The brands I can get:

  Transcend (value)

  Corsair (value and gameing)

  Kingston (value and hyper-x)

  I will be upgradeing the CPU and HARD drive within months comeing.

  Thank you!!!

  Current system specs:

  Lenovo SL300, T5670 1.8 Ghz, 2 GB DDR2-667, 160 GB 5400 RPM HDD

  
  

• Anyone using DDR2 - 800 MHz PC2 - 6400 RAM on a Dimension E520?

  I have a 8-y-o Dimension E520 with a CPU Q6600 and 4 GB of RAM PC2-5300 DDR2 - 667 MHz.

  Max RAM is 8 GB so I did research what type of RAM would maximize the expected gain in speed.

  According to this articleand this one as this thread of Dell, the E520 can accept RAM PC2-6400 DDR2 - 800 MHz.

  In addition, in accordance with this sheet of Intel chipset 965 on the motherboard will have DDR2-800 MHz RAM.

  I have noticed however that a sweep Crucial suggested DDR2-667 PC2-5300, like upgrading RAM later.

  By no means discouraged, I advanced and bought 4 sticks of 2 GB of RAM DDR2-800 PC2-6400 Non ECC Unbuffered of 240 pins.

  Then, installed the new RAM and started in the BIOS. Of course, the 8 GB of RAM is recognized.

  Then started to Ubuntu. However, the initialization has failed before he arrived at the office.

  Then started to Windows 7 (on the same machine, multiboot). Yet once again, began to start Desktop but bluescreened before that he (0 x 00000019 which seems to refer to the memory problem)

  Reinstall all the RAM sticks and tried again with the same result.

  Replaced the 4 GB of RAM has low gear and everything was fine.

  So, is the RAM purchased dubious quality or not my E520 simply not accept RAM DDR2 - 800 MHz?

  In the interest of anyone else might have the same problem or similar, I put the 4 sticks of RAM to the reseller and received four sticks of replacements of the same specification.

  And they work perfectly in my Dimension E520.

  Thus, in response to my original question, the absence of start-up stems from a faulty RAM.

• How to activate the em64t on Tecra R10-116 to use 6 GB RAM

  Hello!

  I want to use 6 GB of ram on my laptop. In this case, I need activate the em64t functionality. I entered the BIOS configuration, but can not find the place where to allow him. Before I saw him...

  Hope someone will help me

  Hello

  As far as I know, that this option is not available in the BIOS and to be honest, I doubt that the BIOS would deal with the 6 GB.
  But why you want to have 6 GB RAM?

  The 4 GB of RAM is more than enough and I doubt that preinstalled applications exploiting fully the 4 GB of RAM

• Can what memory chip I use to upgrade RAM on Satellite L650D?

  I have Toshiba Satellite L650D-123.
  Is the memory at 1066 MHz and my motherboard supports 1600 MHz?
  (Paper one) user manual says my motherboard 1600. I want to just make sure that if it supports 1600 MHz before buy you.

  You need the modules with 1066 MHz
  Rams compatible are:
  1 GB-PA3675U-1M1G
  2GB - PA3676U-1M2G
  4 GB - PA3677U-1M4G

  Good bye

• Satellite Pro U300-143 Ram DDR2 800 taken care of?

  Hello, I am new to the forum.
  Anyone know if it is possible to use DDR2 800 to replace the old 667?
  The bus of the motherboard also goes to 800.
  Thank you.

  Hello

  It makes no sense to use modules more rapid if the chipset would not support the front end of 800 MHz bus speed the FSB could slow down the speed of the memory at the same speed that is supported by front side bus.

  I recommend you chipset. Then you will know, what the FSB speed is supported.
  If the FSB would be favourable to 800 Mhz, you can use these modules.

• Satego X 200-is that I can use memory live DDR2 800 MHz?

  Hello people,

  Anyone know if my X 200 - 21U Satego really suports memory DDR2 800? In the site of the shop I bought my laptop, there is a possibility to install 4096 MB DDR2 (2 x 2 048) 800 MHz. Is this possible or just a scam or a mistake of the shop? What happens if it doesn\t support and I install anyway?

  http://www.notebook.de/popup_printproduct.php?id=10037&LN=de

  After the price, there is a list of "options" it's option 5.

  Well, I think it should work!

  The week last Ibought approximately 4 GB of memory for my X 200 - 21U of OCZ:
  http://GeizHals.at/Deutschland/a268153.html
  And in my laptop, it works fine!

  Post edited by: ADMIN

• Re: Satellite X 200-can I use the 800 mhz memory modules?

  Hello.

  I have a X 200 with 2024 MB of ram.
  I want to spend to 4048 MB ram.

  Is it possible to buy memory ddr2 667 or 800 mhz can I use?
  I think that my motherboard is as follows:
  Intel PM965 Express chipset.

  If its so I can only use ddr2 667 mhz, can I then use any mark at all, or is it special that toshiba recommends?

  You should be able to use the 800 Mhz modules, because the FSB supports 800 Mhz also.

  Greetings

• Can I combine DDR2 667 MHZ DDR2 800 or lower on the Satellite A200 - 1 MB?

  Hello guys

  I have a Toshiba Satellite A200 - 1 MB and my uncle also has a hp Pavilion dv6183ea
  and we are facing the same problem, the computer is delivered with 2 x 512 DDR2 667
  We have to increase the Ram but the Ram DDR2 667 is no longer available in our market.
  The DDR2 800 is available
  can I safely use the DDR2-800 on my A200 - 1 MB or use the combination of DDR2 667 with a new DDR2 800 with no problems on my computer or on the computer of the uncle?
  I have windows vista and uncle is windows xp

  Thank you

  Hello

  Usually, you can use modules of RAM and faster RAM module (in your case, DDR2 800 Mhz) would be clocked at 667 Mhz.
  But in many cases, there are problems of compatibility in many cases, the laptop will not start using different Rams.

  So I think that it of better to use exactly the same RAM modules to avoid these problems, but who knows, maybe you could mix without any problem, you will have to try this out!

• Tecra A8-143 - can I pushed the signal strength?

  I have Intel Pro Set Wireless driver on my Toshiba Tecra A8-143 and signals I have recive in my neigborghoud is very week.

  It is possible to push the signal strength somehow? There is an amplifier of signal to the Bay, or something?

  Hello

  > and signals I have recive in my neigborghoud is very week.
  Laughing out loud
  Why do you want to receive the signal of your neighborhood?

  Unfortunately, you can boost the signal t. This is possible on the router directly and there is no improvement for the wireless network adapter.

• I can't re install Adobe Acrobat professional 7.0 on my computer.  That is to say that a qualifying product is not detected. I can't even through the use of the service line customer they provide 800-272-3623.  This is the worst ever had interactionI with

  I can't re install Adobe Acrobat professional 7.0 on my computer.  That is to say that a qualifying product is not detected. I can't even through the use of the service line customer they provide 800-272-3623.  It's the worst interactionI have ever had with a company.

  Hi joej49728017,

  I'm sorry for the inconvenience caused. But it's all just because Adobe Acrobat 7.0 is a stale version & now the activation server so that there is no.

  Please refer to the following KB doc.  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  The link above will help you to install a special version that doesn't require activation.

  In case you still need assistance, please let us know. We will be more than happy to help you.

  Kind regards

  Nicos

• Re: Tecra A8-143 - is - this overheating?

  I think my Toshiba Tecra A8-143 CPU is overheating, this is SpeedFan messurements
  http://photoserver.WS/images/jQtO4b6d0a6fc6927.PNG

  What should do?

  Hi Suad Novic,

  I put t understand why you think that your laptop is overheating. 60 ° C for a higher CPU usage is correct so don t be you worry about this!
  If your laptop overheats, they freeze all of a sudden without any reason or immediately turn off the power.

  But you can clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.

• Tecra A8-143 PTA83E - screen saver does not work

  I have Tecra A8-143 (PTA83E) tour and the problem with 3DFlayingbox Screensaver. After 15 minutes, it turned on, but my office is dark, nothins is flaying.

  And when I move maus, it stop working and I can see my familiar desktop.
  In the registry under HKEY_CURENT_ USER\Control Panel\Screensaver.3DFlayingObj there's nothing puted.

  http://i281.Photobucket.com/albums/kk239/suadnovic/th_3DScrren.PNG

  How corect this?

  Hey Buddy

  Above all it is a 3rd party software and it in my opinion, that this has NOTHING to do with the laptop.
  I'm not quite sure if anyone here use this screensaver m and I m do not know if you will receive an exact solution how solve this problem of screen saver.

  I would recommend so remove this tool from the operating system and reinstall again.
  In the meantime you could clean the registry using CCleaner free tool.

  Once you have reinstalled the software screen saver check simple settings and check if you can choose and other profile screensaver

• Re: Tecra A8-143 - error message on Config-Free

  I have a problem with ConfigFree TOSHIBA Tecra A8 - 143 Lap. After I instaled patched Internet Download Manager, to try to see the TOP and search for wireless devices, I got this error message

  [http://i281.photobucket.com/albums/kk239/suadnovic/ConfigFreeerrormessege.png]

  An error file is sent to Microsoft, and I would like to know is possible somehow to the public this report here at the forum someone to comment and maybe give good advice?
  I know the post with exactly the same problem already exists here in the forum, but it is closed.
  Also, I would like to know what is the latest version of the ConfigFree driver that is compatible with my knees. Connected version is V5.90.05AB. How can I solve this problem?

  Check the Toshiba site for a ConifgFree update. You can find it here:
  http://EU.computers.Toshiba-Europe.com

  You can also try to use the function to restore the system to an earlier time.

• Tecra A8-143 - increase the font size to BSPlayer

  To change the subtitle font size in BSPlayer, I have to type Ctrl + Num + and Ctrl + Num-

  Which is equivalent to that on my Tecra A8-143 lap?

  Hi Suad Novic,
  Look at your keyboard...

  If there is a Fn key and the ability to activeate the num (ber) block on your keyboard... So yes

  but I think your keyboard has no num (ber) block - you need to use an external keyboard (who that)
  or modify your code to emulate a "num" key-scan...

  Post edited by: Al - eX

  BTW: maybe there is an option IN the bsplayer to change buttons? !