Emergency aid, the missing files

Similar Questions

• Is anyway that I can transfer music from my iphone to itunes to help locate the missing files of the song

  So today, I opened itunes and about half of my music files were missing. A message came when I tried to click on a song and says that it is impossible to locate the files and the missing files now have an exclamation mark next to them. My iphone 6 has all the music files still on it and I am able to read them. I had happen in the past with one or two songs that have disappeared and I tried to connect my iphone to try and resynchronizing the file of the song, but just itunes erases songs out of my iphone, so I re-download just them, although it is a big problem. But because there are about 400 songs missing I need help to solve this problem. If anyone can help it would be greatly appreciated thanks!

  IPhone - ios 9.2

  ITunes - 12.3.1

  See the empty/corrupted after upgrade/crash iTunes library or

  Recover your iTunes from your iPod or an iOS device.

  TT2

• The missing files (NOT deleted) of the file/directory of the system drive NTFS

  Greetings!

  I have a WinXP SP3 system with a SATA 2 TB to the additional internal address as a data reader. This player has only the data (.mp3, video) files in a directory and has never been used for anything other than data files. There is only one directory for the files, and although it is four levels of subdirectories to the bottom, the tree is only these four subdirectories.

  A week ago, I noticed that the free disk space on this drive jumped from 350 GB up to 1.2 TB, leaving about 600 GB of data on the disc (about 2 500 files). After checking what is obvious (Rebreather, etc.), I noticed that the missing files were all from one file *. * to n *. * and [0-9] *. *. All files beginning with o *. * to z *. * are still there. So, essentially, Miss me about 9 000 files.

  I checked to see if the missing files could be cancelled or retrieved and downloaded several utilities 'undelete' recovery or data. All public services showed that there was no data to recover, that is, the files just disappeared or evaporated.

  Where did they go? I'm totally distraught about it.

  The files are not hidden, because the reduction of space disk; hidden files still take up the space.

  I didn't something in training in the hope of recovering the data. I thought that perhaps an index obtained corrupted or deleted because files deleted did not appear in the correct order of the directory index. I ran a chkdsk on the volume, he came to own, and the files were still missing. If the files have been deleted in alphabetical order, they would still be "deleted", recoverable files?

  I also tried to see if I could do a restoration of the system to the point in time before the files have disappeared, but my System Restore says there is nothing to not restore, no action to take.

  Any ideas appreciated.

  ....k

  R - Studio found the files missing, but only about 75% of them were really recoverable. Those who were not recovered was a length of zero byte. The advantage is that the names of the files were still intact, so at least I know which ones to re - create. The downside is that it's a few thousand files that need to be redone. That will take time, but a lot less time that I would have had to spend to recreate all missing files.

  R Studio also found entries previously deleted files, and I got these, too. However, the recovered files are damaged and unusable. Given that I didn't really need those, it wasn't a problem. I mention this simply as something that R-Studio accomplished (and the other tools do not have).

  The recovery is complete in terms of finding the missing files and restoring their readers to spare.  It took a lot of time, about three days I was doing piecemeal in bursts of 500 GB move the files recovered on spare disks. I'll move the files that I had not lost before out of the disc problem, as well, and then replace it. readers are cheap these days.   :-)

  Thanks for the help! Also, thanks for the recommendation R-Studio; This is a very useful tool and well worth the expense!

  ....k

• How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive

  How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive. To give you more information, I have photos stored on a network drive to the following address: Wirelessspace\LaCie\MyPhotoGallery\Family. This folder is a location of library under the images. Because this folder is on a network drive backup backup not file Wizard.

  In addition, the following file locations is not found because they no longer exist. So why the backup wizard continues to look for and how to remove the backup set? I guess the error code following each line means simply that records cannot be found. Is this correct?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Searches\Google file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\SyncUP file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))

  Hello

  I suggest you to follow the steps in the article below and check if it helps.

  Error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281

  Hope this information is useful.

• How to import the missing files

  Hello

  I found a lot of files missing on my system. When I took a quick look, I found that they had imported on another drive of my computer that I had taken.

  How do I:

  (A) import them

  (B) get rid of the link file missing in LR's rest?

  Because right now, I don't then reimport them in LR, as it says the files are duplicates. So, how can I find all the 'missing' files and delete them?

  Also, separately, LR is to see some of my pictures of the iPhone as a new files when they are not new. If I import them, I'll have duplicates.

  Do not import the photos Lightroom think are missing! Do not! It is the wrong thing to do and will make things worse.

  Follow these instructions for Lightroom point to the new location of the photo: Adobe Lightroom - find folders and files moved or missing

• How can I see all the missing files in the 12 elements?

  I have a very large catalog and there are now a few hundred missing files because of me, moving or deleting them out of the elements.

  Is there a way to display only the missing files in the elements in order to be able to work through them and decide to search manually or remove them from my catalog?

  Thanks for any help

  Lee

  If you are in items Organizer12, will find > all missing files

  It will show you all the missing files in your catalog.

  Thank you
  Blandine

• The missing files can be imported and show as dupes.  Claims to have their ghost directory, but is not found in the catalog or HD

  I have 191 files in a known folder to HD.  The catalogue of the room light them says that all of the missing.  If I try to copy as DNG with him do not import checked suspicious files, all gray outside.

  However, if him don't import suspected fooled no box is unchecked, they will import .

  Except: they will not go to my destination, i.e. the same folder in which the resident on the disk hard, 2014_09_06, but a subdirectory of the folder of my choice, also called 2014_09_06, with a check mark next to it indicating 191 files. If I leave this box checked, I can import.  If I uncheck everything seems to be a fool, even if her import alleged fooled no box is unchecked.

  Nowhere in the catalog or the hard drive is this ghost subdirectory is located. Don't forget: When checked, he seems to have 191 files it contains, but I must be on file parent to see this. And even by showing that it has the right number of files he let me import, which can create real and fooled fool's dupes.  When disabled the file, it seems to have no file but my ability to import is blocked. None of these conditions relate to her don't import suspected dupes, who is not checked under both sets of circumstances.

  The final clues: the subfolder icon import has a plus sign on this subject, and I can't click on this folder on the import screen, only in the folder parent of the same name.  In the library of little, this subdirectory, I can click on the parent, I see 191 files, but they all have an exclamation point indicating that they are absent.

  See my other post about the missing files. Once they are, we can work on the importation of treatment to get your fixed catalog.

• How to make a list of all the missing files in a catalog in LR2?

  Is there an easy way to get a list of all the missing files for thumbnails in Lr2? I know that the symbol that appears in the upper right of any particular photo that does not contain the file, but how can I get a list of all these photos for a catalogue (or at least large chunks of a catalog).

  Thank you.

  You can click with the right button on a folder and choose synchronize - it has a button to display the missing files.

  John

• Slow start of the missing files?

  I recently deleted some .tmp files and since Windows XP (SP3) is very slow to start. I did a clean boot and it takes so much time. The delay occurs after the Welcome screen disappears from the screen and lasts a little more than a minute. After the start, everything seems to work normally.

  Is the delay caused by Windows looking for missing files? If so, do I have to reload from CD and then reinstall SP3?

  This was due to an update for .NET Framework 4. My actions have been a coincidence.

  See: KB 2571181 for a fix.

• Error message WLMON or WLMON.exe, the missing files and WPC54G

  Portable running Linksys Network adapter card WPC54G

  OS: XP

  Driver version: 4.100.27

  I get an error message that WLMON.exe has no inialize, and a second pop up that tells me that there are missing files. Can someone tell me if there is a fix to this addition WLMON out of my boot ini and the devil made WLMON.exe? Did he get the same problem and have a solution?

  Do not install the Linksys monitor... just install the driver.

  Remove the Linksys adapter and uninstall the Linksys software menu programs... Re - install drivers insert the CD of Linksys install in your CD-ROM drive, when the welcome is displayed click on exit, connect your USB adapter now... When the Hardware Update Wizard window appears, click on install the software automatically (recommended) and then click Next... Click Finish when the installation is complete.

  Click Start and open the control panel and double-click on network connections. Right click on wireless network connection, and then select view available wireless networks "-If you see your network wireless in the list, the highlight by clicking 'single' on it now, click on the 'Connect' button below-if your wireless network is secured, it asks you to provide the network key - provide the wireless network key and confirm again in the confirmation box and click 'Connect'." It should work...

• The missing files or elements of the registry after malware problem,

  I can only work in SafeMode after malware problem.

  Hello

  1. what happens when you start in normal mode?

  2. do you get an error message?

  I suggest you to restore the system to an earlier point and check if it helps:
  http://support.Microsoft.com/kb/306084

  If you are able to start the computer in normal mode, then try running the System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  Check if that helps.

• Creative Cloud Desktop folder right click on the missing file Options

  Hello

  My creative Cloud DESKTOP folder does not properly since last week.  I've already lost nearly 3 hours with tech support. Share my screen and try different things.   I think that the Tech Guy was incompetent. He didn't get that question and just kept trying the same things again and again for 3 hours.

  
  MY FILES SYNCHRONIZE PROPERLY. THERES NO PROBLEM WITH THE SYNC.  If I drag files into the creative cloud desktop folder. They synchronize correctly in the cloud.   I can access it online without problems.

  The question that I'm going to do with the actual file.  It does not appear to be installed / working properly.   Here is a picture of the help of the Adobe site.  (Creative cloud help |) Collaborate on files and libraries)

  

  1. notice how at the bottom left of each file / folder inside the creative cloud files folder theres a GREEN check MARK (this changes depending on the status of the file).
  2. note also when the file's right-click theres only a 'CREATIVE CLOUD"drop-down Menu with Options for display on the Web site, work together.  Sendlink etc...

  Until last week, My Creative cloud file was EXACTLY the SAME! works perfectly well.   I think that since the new update CC that he stopped doing this.

  Here is a screenshot of MY Creative Cloud Files folder

  

  1 Note how I don't have these icons of green check mark at the bottom left of each file/folder indicating the status of the folder/files.  (YES THE FILES ARE SYNCHRONIZED ILS SHOWS upward on THE site WEB SERVER even if I do not see the controls on the files...)

  2. you can not see in the screenshot, but if I right click on a file/folder I DO NOT have the CLOUD CREATIVE drop-down list, giving me the possibility to send a link, view site etc...

  As I said I've already spent nearly three hours with an incompetent tech guy. He just kept removing .db files, delete the coresync folder, make me Logout / I leave CC etc... for 3 hours.    After two hours, he said he had no problem and had to reexplain him the question...   A bit frustrating really.      Yes, I restarted computer several times. This does not solve the problem.

  I'm on a Pc with Windows 8.1.
  Run the latest version of creative cloud.
  my number is 0186758070

  I hope that this problem can be solved.  It was very convenient for me to click right files and send the link directly. rather than go on the website cloud server and share the link!

  Thank you

  Hi Sgtfrog83:

  Thank you very much for letting us know that your issue has been resolved after reinstalls creative cloud.  The problem is caused by Windows Explorer integration, and there are at least three applications to sync with similar integration methods and that can cause install conflicts.

  Best regards.

  Lin

• Help the missing file

  I'm under 8 PE and the help file has not been installed.  I tried lookin on the installation CD, but there is no help file installation option.  I use the program on an IMac.  Help!

  The help of PSE 8 is online, not on your computer, but you can download a copy for use off line here:

  http://help.Adobe.com/en_US/PhotoshopElements/8.0/Mac/using/index.html

  Make a right click or Ctrl click where it says "View help PDF here" and you can choose to save it on your computer.

• Can not uninstall/reinstall iTunes because of the missing file iTunes6464.msi

  Recently the resources have been insufficient in my C drive. The it guy in my office found because I had 3.5 million .jgp files stored in a folder of windows media! YES 3 500 000 jpg files!

  Decision of Directors... delete the folder. With that, I lost my desktop icons, Skype and iTunes. I was able to reinstall Office icons are back. I rarely use Skype so no question, I've uninstalled it. I will return later.

  The dilemma is now no iTunes, does OK icon... the process should be, do a uninstall/reinstall. With a massive library I want to do it right and who would be in Control Panel/programs/iTunes/uninstall. Alas, I can't.

  The message I get is "the component you are trying to use is on a network unavailable resource.  Click OK to try again or enter a different path to the folder containing the installation package "iTunes6464.msi" in the box below. This item is not found.

  I have downloaded and run the latest version of iTunes6464setup to be told that "a newer version of iTunes is already installed"... the installer closes.

  So now I'm in an add that not only no icon iTunes but no way to unistalling/reinstalling.

  I'm looking for help. :-)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• where to find the missing files .lsb

  Hello. Here's my problem, maybe you can advice me well.

  I have an old .vi in Labview 4.0, which works very well under Windows 98.

  My final goal is to make it work under Windows 7, Labview 2010.

  I know that the first, I have to open the vi in BT 8.0, except for previous version 8.0 and then open it in LV 2010.  Generally, these tasks work correctly with the other vi. I had good results with the other vi.

  But for my situation, this old vi Labview 4.0 needs some libraries (.lsb files) CIN. It gives me errors because of them.

  Here it is:

  ICTRCTRL.lsb

  DIGPRTRD.lsb

  DIGPRTCF.lsb

  AICTRL.lsb

  CHLINDVI.lsb

  AITRIG.lsb

  AICLKCFG.lsb

  AIBUFFCF.lsb

  AIHARD.lsb

  AIGRPCFG.lsb

  AIREAD.lsb

  I tried these files in Labview 4.0 and 8.0 without success. I think that copy and paste will help as I did with the other missing Subvi.

  So my question is: how to find them and 'export' in Labview 8.0?

  Is it possible to find it elsewhere on the web? Or maybe you have?

  You know that I have no experience working with external libraries.

  The only way you can have old screw DAQ with a CIN is if these screws were saved in a Bachelor's degree in law. To avoid that LabVIEW loading them, they must be removed from the llb. So, if you install the latest version of traditional DAQ, which will load and the latest LabVIEW don't use RISC. You will then have to rewrite the program to use DAQmx features since it is the only rider with the support of windows 7.