EMGC 12 c WHO database of pending status

Everyone knows the control Grid 12 c SGD repository database staying in status pending without apparent reason? That's what I have in my environment. I can still access the database via EMGC, just stays pending for some reason any.

Hello

The officer who monitors the target of the database is downloaded successfully? You can check this by running the command ' $ORACLE_HOME/bin/emctl upload agent.

If the download operation works, you can run the command "emctl clearstate agent", and then check the status of the target of the database. Note that this command causes an additional burden for the WHO, in order not to abuse.

Kind regards
-Loc

Tags: Enterprise Manager

Similar Questions

print pending status

Why is my print job status for so long - awaiting more than 3 hours

Hello mreeger,

If you are having problems with ePrint message staying in "pending" status for an extended period of time you could try follow them the steps to solve your problem:

1. If the printer is still lit, disconnect the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once connected to the printer should automatically turn on.

2. If step 1 does not work then try this: first, unplug the printer power cord while it is still. Leave it unplugged and walk to the router. While the router is still lit, disconnect the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once reconnected the router should automatically turn on. Now, go back to the printer and plug the power cord back. Once connected to the printer should automatically turn on.

Most likely, the issue is due to a connection problem minor and your printer or router needs to be reset to re-establish a solid connection.

I hope this helps.

Create a database database dev pending
Hi people,

I need to create a database of dev by using RMAN cloning method. But since it's opening hours and the production database is used at a very high rate, I can't perform the cloning by connecting to the primary database because it can cause slow performance.

The time allocated to the activity is also very short. We have a database of pending created for the primary database. So, is my question possible for me to create the dev database using the database pending?

Version of database is 11.1.0.6 and I can move forward with the active database functionality.
Yes, you can clone from the database pending. Follow the steps below.

1. check if your standby database is synchronized with the primary database.
2 cancel the MRP on the standby database.

ALTER database recover managed standby database cancel;

3. connect mode of Eve as target databases and dev as auxiliary

RMAN target sys /@ auxiliary sys/pwd @.

4. your database of relief would be in Assembly stage and dev in phase nomount.
5. run the duplicate order

RMAN > duplicate target database 'dev' nofilenamecheck.

6. When finished, start the MRP on the backup database

modify the recovery of database managed standby database disconnect from the session;

Removing servers still have the cluster database and agent status 'pending '.

Enterprise Manager 12.1.0.2
We have recently decommissioned 3 servers that were part of a cluster. Servers and their agents are gone.
Em, I deleted the nodes in the cluster, removed the hosts and all of its objects.
A node is gone, two left.
I have 'cluster of databases' which show the status pending.
I have 2 principles that show too inaccessible.
I tried to delete these courses, which all but no luck. Any suggestions?

This code still works?

Start

mgmt_admin.cleanup_agent('agentname:port'); commit;

-mgmt_admin.delete_target_internal ('agentname', 'official'); commit;

end;

Convert DR database recovery pending database

Hi all
11 GR 2
OL 6.5
I have a backup RMAN PROD server.
I also backup current cf and cf standby backup.
Then I copied the following on the DR server.
1. backup of database
2. the current CF (controlfile)
3 stadby cf
4 archiving logs
Can I perform a normal recovery using the current see (not yet open)
My question is, can I replace the current CF with CF Eve, then start going up and resume the recovery pending?
Kind regards
JC

Hello

Yes you can!

you will need to take a controlfile Eve since elementary school and replace it.

RMAN > backup controlfile Eve format ' / tmp/standby_ctl.tmp ';

Take the controlfile and location pending restore

RMAN > restore controlfile eve of ' / tmp/standby_ctl.tmp ';

Once completed.

SQL > alter the editing of the database;

SQL > select controlfile_type, open_mode from v$ database;

-->, he must return to sleep

SQL > alter database recover managed standby database disconnect;

Thank you

Transition to pending status is NOT ALLOWED after a Switchback

Hello
I created a physical primary and Standby. I was able to do successfully a failover. However when I do my switch back, my watch shows a switchover_status of NOT AUTHORIZED
Any ideas what could be the problem. It seems strange that I have a failover but the switchback (while he worked that is my first is once more my first and my day is once more my Eve) has left the status of the day before as NO PERMIT passage.
Y at - it somwhere (table or journal) that may provide a clue as to why the State is NOT AUTHORIZED?
My headphones on the primary server and backup are running ok.
Any help greatly appreciated,
Jim

Ok.

Normal.

My first Test

export ORACLE_SID = PRIMARY

/ home/oracle: PRIMARY > sqlplus "/ as sysdba".

SQL * more: Production of liberation 11.2.0.3.0 Tue Oct 24 08:50:12 2013

Copyright (c) 1982, 2011, Oracle. All rights reserved.

Connected to:

Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

With partitioning, OLAP, Data Mining and Real Application Testing options

SQL > select switchover_status from database v$.

SWITCHOVER_STATUS

--------------------

IN THE STANDBY MODE

SQL >

My Test of Standby

export ORACLE_SID = STANDBY

/ home/oracle: STANDBY > sqlplus "/ as sysdba".

SQL * more: Production of liberation 11.2.0.3.0 Tue Oct 24 08:48:40 2013

Copyright (c) 1982, 2011, Oracle. All rights reserved.

Connected to:

Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

With partitioning, OLAP, Data Mining and Real Application Testing options

SQL > select switchover_status from database v$.

SWITCHOVER_STATUS

--------------------

NOT ALLOWED

SQL >

You do not have a problem. DO NOT AUTHORIZED should change at THE elementary level to halfway in a switch.

Best regards

mseberg

startup of the database: exit with status 9

Hello experts,

like an oracle DBA I could have solved this problem as my owm, but as it is in oracle applications, I don't want to take any chance... I use oracle apps R12 on RHEL 5.2 ACE. uptill now everything was fine, but as I try to clone my database and stop my level for cloning database, it is not upward since then.

I run preclone utility to copy the database to the target computer layer, and after copying all levels (database and applications), I try to restart the database that gives me following error...

[oracle@appsserver PROD_appsserver]$ sh addbctl.sh start PROd

You are running addbctl.sh version 120.1


Starting the database PROD ...


SQL*Plus: Release 10.2.0.2.0 - Production on Tue May 19 22:58:41 2009

Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.

Connected to an idle instance.
ORACLE instance started.

Total System Global Area 1073741824 bytes
Fixed Size                  1264892 bytes
Variable Size             427819780 bytes
Database Buffers          633339904 bytes
Redo Buffers               11317248 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced


Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options

addbctl.sh: exiting with status 9

When I checked for the log file, it says that ORA-12701: create the character of the data set is not known

parallel recovery started with 2 processes
Tue May 19 22:52:39 2009
Started redo scan
Tue May 19 22:52:39 2009
Completed redo scan
 65 redo blocks read, 4 data blocks need recovery
Tue May 19 22:52:39 2009
Started redo application at
 Thread 1: logseq 38, block 2, scn 5965098618544
Tue May 19 22:52:39 2009
Recovery of Online Redo Log: Thread 1 Group 1 Seq 38 Reading mem 0
  Mem# 0 errs 0: /oracle/PROD/db/apps_st/data/log01a.dbf
  Mem# 1 errs 0: /oracle/PROD/db/apps_st/data/log01b.dbf
Tue May 19 22:52:39 2009
Completed redo application
Tue May 19 22:52:39 2009
Completed crash recovery at
 Thread 1: logseq 38, block 67, scn 5965098638596
 4 data blocks read, 4 data blocks written, 65 redo blocks read
Tue May 19 22:52:40 2009
Thread 1 advanced to log sequence 39
Thread 1 opened at log sequence 39
  Current log# 2 seq# 39 mem# 0: /oracle/PROD/db/apps_st/data/log02a.dbf
  Current log# 2 seq# 39 mem# 1: /oracle/PROD/db/apps_st/data/log02b.dbf
Successful open of redo thread 1
Tue May 19 22:52:40 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Tue May 19 22:52:40 2009
SMON: enabling cache recovery
Tue May 19 22:52:41 2009
Incremental checkpoint up to RBA [0x27.3.0], current log tail at RBA [0x27.3.0]
Tue May 19 22:52:44 2009
Successfully onlined Undo Tablespace 368.
Tue May 19 22:52:44 2009
SMON: enabling tx recovery
Tue May 19 22:52:44 2009
Errors in file */oracle/PROD/db/tech_st/10.2.0/admin/PROD_appsserver/udump/prod_ora_6272.trc:*
ORA-12701: CREATE DATABASE character set is not known
Tue May 19 22:52:44 2009
Error 12701 happened during db open, shutting down database
USER: terminating instance due to error 12701
Instance terminated by USER, pid = 6272
ORA-1092 signalled during: ALTER DATABASE OPEN...

I also have ckecked /oracle/PROD/db/tech_st/10.2.0/admin/PROD_appsserver/udump/prod_ora_6272.trc file specified in the alert log file and it says

Dump file /oracle/PROD/db/tech_st/10.2.0/admin/PROD_appsserver/udump/prod_ora_6272.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /oracle/PROD/db/tech_st/10.2.0
System name:    Linux
Node name:      appsserver.microproindia.com
Release:        2.6.18-92.el5
Version:        #1 SMP Tue Apr 29 13:16:12 EDT 2008
Machine:        i686
Instance name: PROD
Redo thread mounted by this instance: 1
Oracle process number: 13
Unix process pid: 6272, image: [email protected] (TNS V1-V3)

*** SERVICE NAME:() 2009-05-19 22:52:39.264
*** SESSION ID:(389.3) 2009-05-19 22:52:39.264
Successfully allocated 2 recovery slaves
Using 543 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 38, block 2, scn 5965098618544
    on-disk rba: logseq 37, block 3, scn 5965098598491
  start recovery at logseq 38, block 2, scn 5965098618544
*** 2009-05-19 22:52:39.555
Started resilvering redo thread 1 seq 38: blocks 2-66
*** 2009-05-19 22:52:39.586
Completed resilvering redo thread 1 seq 38
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 32Kb in 0.26s => 0.12 Mb/sec
Total physical reads: 4096Kb
Longest record: 0Kb, moves: 0/86 (0%)
Longest LWN: 12Kb, moves: 0/7 (0%), moved: 0Mb
Last redo scn: 0x056c.db958ee3 (5965098618595)
----------------------------------------------
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 165/169 = 1.0
----------------------------------------------
*** 2009-05-19 22:52:39.623
KCRA: start recovery claims for 4 data blocks
*** 2009-05-19 22:52:39.678
KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
*** 2009-05-19 22:52:39.679
Recovery of Online Redo Log: Thread 1 Group 1 Seq 38 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 169/169 = 1.0
----------------------------------------------
ORA-12701: CREATE DATABASE character set is not known

What could be the problem? I am trying to open my apps from source as target is located on the same machine, I applied the following hotfixes:

1 DELTA 6
2 RUP6
3 R12. T2K. A.Delta.6 Techstack R12. T2K. For the autoconfig consilidate patch

as mentioned in metalink Doc-id 387859.1 ...

any sugestion will be highly appreciated

Thanks and greetings
VD
3.

Hello

Can you check the following to note and see it helps.

Errors at the start of the database: ' ORA-01092: ORACLE terminated instance. Forced logoff"and" "ORA-12701: CREATE DATABASE character set is not known".

https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=553264.1

Pending status
Hi all
I have a user in the IOM with object resource "AD User" in the disabled"" State.
I need to change the status of the resource to be 'Activé' object, but the task of "Allow the user" showing the status "pending".
I tried to add this task, but always show me the same status.

Is it possible that this task (allow the user) change of the status of "full"?
How do I do it?

Thank you
Bleid. -.

Published by: Bleid on March 27, 2009 12:40
Probably that's in a State of waiting because it depends on a task that is not in a finished State. To exit queue, you must obtain the correct dependent task, or go to the task definition and remove the dependency and reinsert the task.

See you soon,.

Deborah

Repair Apple - stuck to the repaired product back pending status

I sent my phone to Apple for repair on 24 February. 26, the repair status changed to "fixed return the product awaiting." Today, it is 28 and I still have not received my iPhone.

I sent my phone to Apple for repair, because there was a problem with the quality of the screen.

Help, please! Thank you.

UPDATE

------------

Just received message from Apple saying that it has been resolved and he would be sent tomorrow.

Posture for Smartphones - Android - pending status

I'm moving through our infrastructure ISE smartphones. I have Windows works properly, it assigns a certificate, joins the employee network, installed the client of the NAC and requires a remediation action.

When an Android phone (have not tried iOS again) tries to connect it receives a certificate, is looming as Android and then gets stuck in the situation of pending posture.

I have attached a screenshot.

Thank you.

The detailed report on the pan authentication page and confirm that you get the authz profile. My guess is that you have found one for the assessment of posture because you do not respect the conditions of your authz android police. Take a look at the profile of endpoint entry and there is no doubt that one of the conditions is not met.

for sure, you don't need the postural control included in the conditions.

What reorg on database tablespace pending?

Hello Experts,
I foresee a great table and followed by tablespace reorg deletions in primary database. I would like to know how it would affect his correspondent DR?
Details:
Database: 11.1.0.7
Standby: physical standby mode maximum performance
Procedure: Drop Table
1. create temporary tables with the ETG (covering the necessary data)
2 truncate the original table
3. replace in the original table
4. temporary fall
Tablespace reorg:
ALTER tabke move
ALTER index rebuild
Moving LOB.
I know that drop table should not cause impact as I am non-specification nologging and underlying tables are also not settled on nologging. But curious to know what it would have an impact of tablespace reorg?

ALTER TABLE MOVE command will generate again. The generation of redo of rebuilding index should be minimal. I can't say with certainty on the move LOB. But it is certainly something that you can test in a non-production environment to determine how it will apply to your specific situation.

See you soon,.
Brian

database error pending

Hello

I have a standby database one node configured for the server (11.1.0.7) prod on RHEL 4

When I run the following query against Prod, it gives the result

select  SEQUENCE#,applied,DEST_ID,STANDBY_DEST,THREAD# from v$archived_log

 SEQUENCE# APPLIED      DEST_ID STA    THREAD#
---------- --------- ---------- --- ----------
     80756 NO                 1 NO           1
     80757 NO                 2 YES          1
     80757 NO                 1 NO           1
     80758 NO                 1 NO           1
     80758 NO                 2 YES          1
     80759 NO                 1 NO           1
     80759 NO                 2 YES          1
     80760 NO                 2 YES          1
     80760 NO                 1 NO           1
     80761 NO                 2 YES          1
     80761 NO                 1 NO           1

 SEQUENCE# APPLIED      DEST_ID STA    THREAD#
---------- --------- ---------- --- ----------
     80762 NO                 2 YES          1
     80762 NO                 1 NO           1

Same query executed on Eve gives

 SEQUENCE# APPLIED      DEST_ID STA    THREAD#
---------- --------- ---------- --- ----------
     80750 YES                2 NO           1
     80751 YES                2 NO           1
     80752 YES                2 NO           1
     80753 YES                2 NO           1
     80754 YES                2 NO           1
     80755 YES                2 NO           1
     80756 YES                2 NO           1
     80757 YES                2 NO           1
     80758 YES                2 NO           1
     80759 YES                2 NO           1
     80760 YES                2 NO           1

 SEQUENCE# APPLIED      DEST_ID STA    THREAD#
---------- --------- ---------- --- ----------
     80761 YES                2 NO           1
     80762 YES                2 NO           1

Is there a gap archive?

coz

Select * from archive $ v gap gives nothing

but I get form alert away EM

Hello

This could be a bug - Bug 7417614 - APPLIED column in V$ ARCHIVED_LOG may indicate by mistake a journal has not been applied (Doc ID 7417614.8)

Raise an SR for support of oracle.

Anand

Published by: Anand on July 9, 2012 10:23

Database logical pending down
I am new to the process of Data Guard and I wanted to know the following:

I have a primary database 9i which is delivered to a logical standby database, however if the logical database ensures breaks down for some reason, (hardware failure) this is unattainable, I can set up to warn me that her occurred?

Is this something on the primary DB which warns me that recovery logs are perhaps not treated? The Dead Detection SQLNET Connection parameter is used. EXPIRATION DATE? How to identify sleep primary connection is down among so many user connections?

Thank you very much

AM
In 9i, it is not that I know well. Although I don't have much experience with 9i OEMS.

In 10g if you select a Broker Configuration OEM Grid Control can talk you as well as errors of log alerts causing notification as well in the control grid

Time Machine: deleted backups of the status "pending".

Hello world

I manually deleted some old backups Time Machine interface, by clicking on the gear button in the backup Finder and selecting Remove backup.

Now deleted backups are no more hard disk or in the trash, but they are always present in the Time Machine interface in a "pending" status and it is not possible any action on them.

How can I remove them completely from Time Machine?

Thanks in advance for any suggestion,

Good bye

Gabriele

Manual removal of the old backups is not a good thing to do. Let Time Machine take care of itself.

I suggest you use Spotlight to reindex your hard disk and backup disk, then run a backup Time Machine and see what clears the problem. If this isn't the case, you might be better off erase your backup disk and start a new Time Machine backup.

Spotlight - re - index

ARHPMERGE party merger completes successfully, but the status is still pending.

Hello
11.5.2.10
ARHPMERGE party merger completes successfully, but the status is still pending.
Pointers.
Thanks, Jeet

PL don't post duplicates - advantage ARHPMERGE merger complete however pending status

EMGC 12 c WHO database of pending status

Similar Questions

Maybe you are looking for