Pending status

Similar Questions

• print pending status

  Why is my print job status for so long - awaiting more than 3 hours

  Hello mreeger,

  If you are having problems with ePrint message staying in "pending" status for an extended period of time you could try follow them the steps to solve your problem:

  1. If the printer is still lit, disconnect the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once connected to the printer should automatically turn on.

  2. If step 1 does not work then try this: first, unplug the printer power cord while it is still. Leave it unplugged and walk to the router. While the router is still lit, disconnect the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once reconnected the router should automatically turn on. Now, go back to the printer and plug the power cord back. Once connected to the printer should automatically turn on.

  Most likely, the issue is due to a connection problem minor and your printer or router needs to be reset to re-establish a solid connection.

  I hope this helps.

• EMGC 12 c WHO database of pending status

  Everyone knows the control Grid 12 c SGD repository database staying in status pending without apparent reason? That's what I have in my environment. I can still access the database via EMGC, just stays pending for some reason any.

  Hello

  The officer who monitors the target of the database is downloaded successfully? You can check this by running the command ' $ORACLE_HOME/bin/emctl upload agent.

  If the download operation works, you can run the command "emctl clearstate agent", and then check the status of the target of the database. Note that this command causes an additional burden for the WHO, in order not to abuse.

  Kind regards
  -Loc

• Repair Apple - stuck to the repaired product back pending status

  I sent my phone to Apple for repair on 24 February. 26, the repair status changed to "fixed return the product awaiting." Today, it is 28 and I still have not received my iPhone.

  I sent my phone to Apple for repair, because there was a problem with the quality of the screen.

  Help, please! Thank you.

  UPDATE

  ------------

  Just received message from Apple saying that it has been resolved and he would be sent tomorrow.

• Posture for Smartphones - Android - pending status

  I'm moving through our infrastructure ISE smartphones.  I have Windows works properly, it assigns a certificate, joins the employee network, installed the client of the NAC and requires a remediation action.

  When an Android phone (have not tried iOS again) tries to connect it receives a certificate, is looming as Android and then gets stuck in the situation of pending posture.

  I have attached a screenshot.

  Thank you.

  The detailed report on the pan authentication page and confirm that you get the authz profile. My guess is that you have found one for the assessment of posture because you do not respect the conditions of your authz android police. Take a look at the profile of endpoint entry and there is no doubt that one of the conditions is not met.

  for sure, you don't need the postural control included in the conditions.

• Transition to pending status is NOT ALLOWED after a Switchback

  Hello

  I created a physical primary and Standby. I was able to do successfully a failover. However when I do my switch back, my watch shows a switchover_status of NOT AUTHORIZED

  Any ideas what could be the problem. It seems strange that I have a failover but the switchback (while he worked that is my first is once more my first and my day is once more my Eve) has left the status of the day before as NO PERMIT passage.

  Y at - it somwhere (table or journal) that may provide a clue as to why the State is NOT AUTHORIZED?

  My headphones on the primary server and backup are running ok.

  Any help greatly appreciated,

  Jim

  Ok.

  Normal.

  My first Test

  export ORACLE_SID = PRIMARY

  / home/oracle: PRIMARY > sqlplus "/ as sysdba".

  SQL * more: Production of liberation 11.2.0.3.0 Tue Oct 24 08:50:12 2013

  Copyright (c) 1982, 2011, Oracle. All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select switchover_status from database v$.

  SWITCHOVER_STATUS

  --------------------

  IN THE STANDBY MODE

  SQL >

  My Test of Standby

  export ORACLE_SID = STANDBY

  / home/oracle: STANDBY > sqlplus "/ as sysdba".

  SQL * more: Production of liberation 11.2.0.3.0 Tue Oct 24 08:48:40 2013

  Copyright (c) 1982, 2011, Oracle. All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select switchover_status from database v$.

  SWITCHOVER_STATUS

  --------------------

  NOT ALLOWED

  SQL >

  You do not have a problem.   DO NOT AUTHORIZED should change at THE elementary level to halfway in a switch.

  Best regards

  mseberg

• Time Machine: deleted backups of the status "pending".

  Hello world

  I manually deleted some old backups Time Machine interface, by clicking on the gear button in the backup Finder and selecting Remove backup.

  Now deleted backups are no more hard disk or in the trash, but they are always present in the Time Machine interface in a "pending" status and it is not possible any action on them.

  How can I remove them completely from Time Machine?

  Thanks in advance for any suggestion,

  Good bye

  Gabriele

  Manual removal of the old backups is not a good thing to do. Let Time Machine take care of itself.

  I suggest you use Spotlight to reindex your hard disk and backup disk, then run a backup Time Machine and see what clears the problem. If this isn't the case, you might be better off erase your backup disk and start a new Time Machine backup.

  Spotlight - re - index

• ARHPMERGE party merger completes successfully, but the status is still pending.

  Hello

  11.5.2.10

  ARHPMERGE party merger completes successfully, but the status is still pending.

  Pointers.

  Thanks, Jeet

  PL don't post duplicates - advantage ARHPMERGE merger complete however pending status

• Composites Show "Status pending" after you restart the server

  Hi team,
  
  I'll call a composite to composite one another, using the WSDL url. Whenever any rebound server happens to be composites of parent are going to pending status and shows error'SOA infrastructure is not loaded for this composite. Error getting entry flow XML < WSDL url goes here > '
  
  I had found this article on the web.
  https://blogs.Oracle.com/AIA/entry/aia_11g_best_practices_for_dec
  Followed the steps. Although my problem persists. Any help would be greatly appreciated.
  
  -Sainaba

  You must reference it the WSDL other composites of MDS instead of use the WSDL url.
  Here are the steps I used to do.
  1. go to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps" (where C:\Oracle\Middleware is the path where you install your jdeveloper in your machine)
  2. create a 'lib', 'lib\wsdl', 'lib\xsd' files in the previous path
  3. get the HelloWorld composite (example) WSDL url. Put it in the browser and save it locally as ".wsdl" (i.e. HelloWorld.wsdl) in the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\wsdl".
  4 copy the xsd (say HelloWorld.xsd), which is used in the project HelloWorld to the composite file and copy to the folder "C:\Oracle\Middleware\jdeveloper\integration\seed\apps\lib\xsd". Make sure you copy all the xsd (s) dependent as well.
  5. open the file previously saved '.wsdl', change the with something like that.
  oramds:/apps/lib/WSDL/HelloWorld.wsdl*.
  6. change the value of the 'schemaLocation' to ' * oramds:/apps/lib/xsd/HelloWorld.xsd* '. "Also, make sure that there is no place where it refers to the URL of the SOA server except to the.
  7. open JDeveloper, create the base of SOA MDS file
  8. navigate to the file composite.xml, where he called for HelloWorld.
  9. double-click on the reference "HelloWorld" and will return the wsdl for the local mds.
  * 10. Go to the source of the composite.xml view and change the location of the binding of the service reference "HelloWorld" BLAH oramds to real composite wsdl URL
  11 deploy the MDS (all files in your lib folder) artifacts at MDS of your server. It is the key step before the composite can be deployed on the server. You can use the ant script or you can use the jdev project to do that (we used the ant script).
  12. now your process can be deployed on the server with any problem. Also, you can repeat as many times as you want and you shouldn't see any problem. (granted, all processes update with this approach to reference the wsdl for reference of mds file)

  * Step 10 is not necessary for everyone. I have maintained a separate of the MDS for different environment version. Thus, each environment has correct endpoint in the MDS. We don't have to use the deployment configuration plan when promoting different environment. If you don't want to do, you need to change the location of the binding in the composite.xml or change as well as the plan of the config.

  HTH
  Hruthayah

  Published by: h_kumari on 27 Sep, 2012 13:43

• How to select the same status in a group?

  Hi all

  How pulling the waiting for order status all the id, based on the group.

  For example,.

  ID of the command name status

  AAA 1 pending

  AAA 2 open

  AAA 3 open

  4 AAA approved

  AAA 5 approved

  BBB 1 pending

  BBB 2 pending

  BBB 3 pending

  1 approved CCC

  CCC 2 pending

  CCC 3 pending

  DDD 1 pending

  DDD 2 pending

  I need output like this:

  ID of the command name status

  BBB 1 pending

  BBB 2 pending

  BBB 3 pending

  DDD 1 pending

  DDD 2 pending

  Thank you

  Pradeep D.

  Seems (at least to me) it must be that the status "pending".

  with

  commands like

  (select name, 1 order_id ' AAA', 'pending' status of Union double all the)

  Select 'AAA', 2, 'Open' to all the double union

  Select 'AAA', 3, 'Open' to all the double union

  Select 'AAA', 4, 'approved' of all the double union

  Select 'AAA', 5, 'approved' of all the double union

  Select 'BBB', 1, 'pending' Union double all the

  Select 'BBB', 2, 'pending' Union double all the

  Select 'BBB', 3, 'pending' Union double all the

  Select 'CCC', 1, 'approved' of all the double union

  Select 'CCC', 2, 'pending' Union double all the

  Select 'CCC', 3, 'pending' Union double all the

  Select 'DDD', 1, 'pending' Union double all the

  Select 'DDD', 2, 'pending' double

  )

  SELECT name, order_id, status

  (select name, order_id, status, count (distinct status) on cd (partition by name)

  orders

  )

  When status = 'pending '.

  and cd = 1

  NAME	ORDER_ID	STATUS
  BBB	1	Pending
  BBB	2	Pending
  BBB	3	Pending
  DDD	1	Pending
  DDD	2	Pending

  Concerning

  Etbin

• CC of Photoshop (2014) update "pending."

  Update of Photoshop CC (2014) remains in "pending" status until I care to let it stay like that.

  A few hours ago, I had the same message for Photoshop and Bridge CC.  I cancelled two, and while the update of the PS cancelled successfully updating of the bridge still (several hours later) said "cancellation."

  I should have updated this.  I decided to restart (Mac OS X Mavericks) and that solved the problem.  Thank you.

• Archived content that is in the workflow, status review

  I archive the content, which is still in the workflow, is not a review, not approved.
  If the status of the indexer is presented as "Workflow."
  Status review is "Review".
  
  If I create a query with these criteria, the archive is empty.
  
  dReleaseState = 'E' AND dStatus = 'OPINION '.
  
  Query options = "all selected revisions.
  
  I know exactly that he is happy and I should have more than 200 files but exported archiver "0".
  Finish. Exports successfully 0 revisions.
  
  What can I do to get around this restriction?
  
  Thx for your help.
  
  
  By the way... Found Repository Manager content in the workflow. Archiver is not.
  
  Edited by: travillion on 18.09.2012 10:25

  Sorry, but this is the correct and expected. You cannot export any items currently in an active workflow.

  This excerpt comes from 10g documentation, but it applies to 11g. (He has been this way for many, many years.)

  You can export revisions that have a status of RELEASED, DONE, EXPIRED and GENWWW. You cannot export revisions that are in an active workflow (revision, EDITING or pending status) or which are DELETED.

  A big reason is that there is a bit of additional data on the document and the associated workflow process itself that archive simply cannot capture and migrate.

  It is much simpler to just complete the workflow before attempting to migrate the data.

• Simultaneous program are awaiting the status

  Hello
  
  I was running program main competitor who has 20 concurrent programs of the child.
  each child conc prog is independent (does not depend on other children), but I see onlt 17 concurrent programs to children in the State of execution and other 3 pending
  Status.
  But remaining child 3 programs also ran and finished.
  
  Could you tell me why 3 child care programs are pending at the start?
  What should I do to make every 20 to run at a time.
  
  
  Thank you.

  Post the details of the version of the application, the database version and the OS.

  I was running program main competitor who has 20 concurrent programs of the child.
  each child conc prog is independent (does not depend on other children), but I see onlt 17 concurrent programs to children in the State of execution and other 3 pending
  Status.
  But remaining child 3 programs also ran and finished.

  Could you tell me why 3 child care programs are pending at the start?
  What should I do to make every 20 to run at a time.

  How many process is assigned to the CM that treats this request? If the number is less than the number of concurrent requests, then it is an expected behavior.

  System administrator > simultaneous > Manager > manage > ask the CM

  Thank you
  Hussein

• Validation of the standby system with the status of 'Provisioning queue'

  Hello
  
  I'm trying a "Service account" a provision of the target (OID) of the IOM help resource application. After request, "Validation of system" task shows as "pending" status; and 'Status' is "Queued Provisioning" for the cases below:
  
  1. same values for user ID, first name, family name (E.g. TESTINGUSER001).
  2. different user with the same name ID, name.
  
  If we give different values, then it is put into service in order to successfully target. Can someone let me know why the behavior is so? It's very urgent.
  
  -Katty Mutya.
  
  Published by: 824250 on February 17, 2011 01:42

  Can you check length assigned in the form of object or process of your attributes.

• Podcasts downloads iOS 10.0.1 stuck "waiting...". »

  iPhone 6

  iOS version 10.0.1

  Podcasts version 2.5 (1134.109)

  Beginning September 17, 2016 only some of the newly released podcasts remain blocked in the "preparing to download" or "waiting...". "status. Three updates yesterday, it got stuck in "pending" status ». Two today, we're stuck in "waiting...". "So the two podcasts are sitting at the top of the app"waiting... ". "to download.

  Troubleshooting

  • Power cycling the phone.
  • Enabled / disable wifi
  • Remove all previously listed podcasts

  UPDATE: I solved solved this problem.

  • Go to the My Podcasts list (icons at the bottom of the app)
  • Choose the podcast which has an episode stuck in "waiting...". »
  • Click on the «...» "to the right of the blocked episode, then click on"cancel download ".
  • Click on the «...» "to the right of the episode and choose"Download episode ".