Empty workspace URL

Similar Questions

• Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

  Hello
  Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
  I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
  * Foundation Services
  * HFM
  * FDM
  
  Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
  During configuration.
  (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
  (2) in addition, I have selected to configure Oracle HTTP server as a web server.
  These two steps were successful.
  
  But shared services and the workspace URL do not work. We get a 404 error.
  Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
  Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
  
  When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
  Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
  
  Can someone please suggest a solution for this.
  
  # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
  # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
  
  Thanks in advance.
  TEJ

  Hi all.

  Thanks for all your useful contributions.

  Finally, the reconfiguration is successful.

  Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

  Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

  Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

  Finally, Shared Services and the workspace URL work correctly.

  http://servername:28080/Interop/index.jsp

  http://servername:28080 / workspace /.

  Kind regards

  TEJ B

• Can you make Hyperion a workspace URL aliases?

  We use Hyperion 9.3.1 with WebLogic 9.1
  
  is there a way to make the workspace URL: \\servername:port\workspace an alias?
  
  It would be a benefit to our users using something like BFS typed in the URL IE address bar who forward them to the Hyperion servername and port specific.

  STC says:
  We use Hyperion 9.3.1 with WebLogic 9.1

  is there a way to make the workspace URL: \\servername:port\workspace an alias?

  It would be a benefit to our users using something like BFS typed in the URL IE address bar who forward them to the Hyperion servername and port specific.

  If you use IIS or Apache as web server with Weblogic, you can make an html page to redirect to the actual URL.

• Workspace URL parameter problem!

  I have a URL like this:

  http://localhost: 8080 / Workspace? startEndpoint = HelpDeskProcess.InitiationForm

  The process name is HelpDeskProcess and the endpoint name is initForm

  But when I type this URL in the browser it opens the workspace but it shows an error "'endpoint Invalid Id". "

  Any suggestions?

  Nith

  Sorry, I meant check the TaskManager endpoint point :-) Endpoint Management

  I don't check with IE8. However, IE 6 works for me. Can you try to lower the security settings of the browser or may be trying to add this : http://server: port in your list of trusted sites and see if that makes a diff. I know that IE8 has a lot of increased security constraints.

• Workspace URL without port number?

  Hello

  Y at - there a way to config the URL for the workspace do not use the port number for LCES Webpshere 6.1 environment (e.g."" http://localhost: / workspace/ "instead of"http://localhost:9080 / workspace /"'") due to the configuration of the firewall?

  Thank you

  DAO Han

  (1) change the port WC_defaulthost of the appserver 9080 to 80 instance

  (2) make sure that '80' is listed as a 'host alias' for the virtual host 'default_host' or another virtual server that you created exclusively for LiveCycle

  (3) restart the appserver instance

  (4) check the SystemOut.log and verify that all web modules LiveCycle now bind to port 80, among others (such as 5060, 5061 etc.).

  (5) try http://localhost/workspace and it should work.

• EMP 11.1.2.4: url error workspace

  Hi all

  We are on EMP 11.1.2.4 on redhat linux.

  We had applied the corrective update on EMP 11.1.2.3 EMP 11.1.2.4 upgrade.

  We have essbase and planning an application.

  After you apply the update, we have a weird problem with the url for the workspace.

  When enter us the workspace url in the web browser, it gets hang poping, loading only screen.

  http://Linux_server:19000 / workspace /.

  
  

  but when we are listening post like 28080 then it will ask for user name and password to connect.

  http://Linux_server:28080 / workspace /.

  
  

  After that we disconnected and again go to workspace url using the port 19000

  http://Linux_server:19000 / workspace /.

  then only it works, workspace is opened without any problem

  
  

  
  

  
  

  does anyone have idea?

  
  

  Kind regards

  Dattatray Mate
  

  Hi all

  problem has been solved now.

  everything I had put the entrance of 28080 first for foundation server as follow & delete the other entry,

  Another server as a windows server which have HFM server has been previously configured with this server as server of shared services and now these windows server now having its own services on the same server. so I deleted its mod_wl_ohs.conf file entries

  SetHandler weblogic-Manager

  WeblogicCluster EPM2.ind.XYZ.com:28080

  WLIOTimeoutSecs 6000

  Idempotent OFF

  SetHandler weblogic-Manager

  WeblogicCluster EPM2.ind.XYZ.com:28080

  WLIOTimeoutSecs 6000

  Idempotent OFF

  WLSocketTimeoutSecs 600

  Kind regards

  Dattatray Mate

• URL of workspace inside the form of Flex

  ES1 using yet.

  Does anyone know an easy way to access the Workspace URL from a Flex form?  I tried to use the BrowserManager, but because the Flex form is actually loaded inside another Flex application and not the browser, it doesn't seem to work for me.

  My goal is to use the URL to an internal configuration in the form of Flex to meet DEV, TEST, PROD servers.

  I misread your message. I'm sorry.

  The answer is

  var workspaceURL:String = Application (app) .url;

  demand refers to the top-level Application. Since the applciation is a property of type Object, you must perform a cast is using the Application class.

  I hope that's what you're looking for!

  Nith

• Migration of application to another workspace via the script

  Hello
  
  I want to install an APEX application in a new (empty) workspace with a fix application_id.
  I use the following script
  
  Select workspace_id
  in l_ws_id
  of apex_workspaces
  where workspace = "TEST_WORKSPACE";
  
  apex_application_install.set_workspace_id (l_ws_id);
  apex_application_install.set_application_id (l_ap_id_fix);
  apex_application_install.generate_offset;
  apex_application_install.set_schema (Root_User);
  apex_application_install.set_application_alias ('SP_APEX');
  apex_application_install.set_application_name ('SP_APEX');

  Hi Kirsten,

  I'm happy that I could help you.
  you would be so kind to mark the correct anwser, as shown in the [url https://forums.oracle.com/forums/ann.jspa?annID=1324] announce: Oracle Application Express welcome to the Discussion Forum!

  * It is considered good etiquette to the responses of reward with points (as "useful" - 5 pts - or 'correct' - 10pts).

  Thank you
  Erik-jan

• Muse 3.0 - Preview Mode is empty

  Hello

  I've updated to the new Muse Version 3.0. Everything worked fine before, but now with the new version when I go to preview mode to see what things will look like I have an empty workspace. I'm on a Mac OS X 10.6.8 - what would be the problem? -I hope not.

  If anyone can help me I would appreciate it. TKS mil.

  I highly recommend to start a new thread and in this thread include the URL of the page and a screenshot of the page in Design view (and possibly a screenshot of the Plan view). This thread has been inactive for a year and a half and is not really the problem you have described or a version of Muse more than vaguely similar to the version you are using (assuming you are using a recent version).

• How to get the url dropdown bar be simple recent history

  I would like a simple list of recent history displayed when I click on the arrow at the right end of the URL entry box. I mean a simple most-recently-visited-on-the-top list of URLS. What I get by default is a list which has absolutely no sense to me, is in some unknown order and is of no value whatsoever. I don't know what algorithm is used to populate the list that is displayed leaving completely empty the URL line. I can't find an option that would set this list view. I find the boring bar awesomely as it's great.

  The drop-down arrow on the far right shows a list of websites that you typed or pasted in the address based on frecency (visit of the bonus points) bar.

  • https://developer.Mozilla.org/en/The_Places_frecency_algorithm

• Working space and the planning of the URL does not not after change of IP address

  Hi all

  I use 11.1.2.1 and recently the IP addresses of the servers have changed. Because of this schedule and the workspace URL does not work, although EE and shared services work. If I run the URL of space working everything freezes (EAS and shared services) and I have to stop/start services.

  Please suggest how to solve this problem.

  Thank you

  MK

  Well there is your problem then

• How to change the background image of a newtab

  Hello

  I'm looking for a simple addon that will allow me to change the background image for my new tab page. I still want the empty bar url and the new tab to say "new tab". Just the simple ability to change the background image without changing anything else.

  Thanks in advance
  Niels

  Here's an add-on which may help! https://addons.Mozilla.org/en-us/Firefox/addon/customize-aboutnewtab/

• Vista Business 64-Bit with AutoCAD 2009 does not seem to use all 8 GB of RAM available.

  A workstation newly built (S5000XVN Intel / Xeon / 8 GB RAM / 2 GB RAM video) with Windows Vista Business 64-bit is used with AutoCAD 2009 (64-bit).  The workstation hangs under stress, apparently because not enough RAM is available.  ("Stress" is "Turning entirely made of a certain complexity 3D drawings")

  The Task Manager / Performance tab indicates never to use RAM above about 3.25 GB, even if ten or more concurrent applications are loaded, including IE 8 (6 graphically heavy windows) and AutoCAD with 6 or more complex drawings open at the same time.

  There are two issues, I think:
  1. in the event that a busy workstation indicate use RAM above the 32-old bit of 3.2 GB limit?
  2 are there MS Windows Vista settings that are necessary to ensure the use of RAM available?

  Thanks in advance.

  Thanks for the reply.

  I studied the installation of AutoCAD 2009.  It's actually the 64-bit version that is installed, and the Task Manager reports it as a 64-bit application when it runs.  (In other words, it is not marked as a 32 bit application.)

  I must admit that I no longer believe that the machine is running out of resources or do not use all the resources available to it.  We tested the machine by throwing 18 complex, fully rendering the 3D drawings within the Academy, in addition to two cases of IE 8, three instances of Explorer Windows and MS Windows Mail.  Use of the RAM did climb, reaching finally the 4.06 GB, clearly indicating that the 32-bit 3.2 GB limit has been exceeded.  It seems that just drawings don't take up that much RAM.  BTW, there was no increase in the paging activity that I could see.

  However, the application does not seem to be frozen or looping when the client attempted to turn one of the drawings.  The CPU on the two wires (Xeon processor) usage increased to 55% and remained there. the State of the process, as reported by the task manager went to "Not responding" and stayed there; and the display of the image froze on an empty workspace, with a three seconds flash drawing on every 20 seconds.

  So: It now seems that there is a problem with AutoCAD, not a Vista problem.  I would appreciate comments, however, if you think that this analysis is wrong, incomplete or based on wrong assumptions.

  Thanks for your help.

• * CRITICAL ERROR * Momentics - Editor could not be initialized

  java.lang.OutOfMemoryError: Java heap space
      at java.util.Arrays.copyOf(Unknown Source)
      at java.lang.AbstractStringBuilder.expandCapacity(Unknown Source)
      at java.lang.AbstractStringBuilder.append(Unknown Source)
      at java.lang.StringBuilder.append(Unknown Source)
      at com.rim.tad.tools.qml.parser.ast.ASTUtils.indent(ASTUtils.java:233)
      at com.rim.tad.tools.qml.parser.ast.ASTUtils.access$0(ASTUtils.java:231)
      at com.rim.tad.tools.qml.parser.ast.ASTUtils$1.visit(ASTUtils.java:134)
      at com.rim.tad.tools.qml.parser.ast.ASTVisitor$Adapter.visit(ASTVisitor.java:223)
      at com.rim.tad.tools.qml.parser.ast.ASTVisitor$Adapter.visit(ASTVisitor.java:313)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:111)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLObject.accept(ASTQMLObject.java:102)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:122)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLObject.accept(ASTQMLObject.java:102)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:122)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLObject.accept(ASTQMLObject.java:102)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:122)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLObject.accept(ASTQMLObject.java:102)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:122)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLObject.accept(ASTQMLObject.java:102)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:122)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLObject.accept(ASTQMLObject.java:102)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:122)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLObject.accept(ASTQMLObject.java:102)
      at com.rim.tad.tools.qml.parser.ast.ASTQMLNamedValue.accept(ASTQMLNamedValue.java:122)
      at com.rim.tad.tools.qml.parser.ast.ASTList.accept(ASTList.java:279)
  

  At startup. Originally close the editor. How to solve this problem?

  Criticism! Impossible to develop or access the qml files.

  Also, try opening a new empty workspace.  If you have disabled Momentics to invite the user to choose a workspace on startup, open the following file in a text editor:

  bbndk-2.1\configuration\.settings\org. Eclipse.UI.IDE.prefs

  And change:

  SHOW_WORKSPACE_SELECTION_DIALOG = false

  TO:

  SHOW_WORKSPACE_SELECTION_DIALOG = true

  And then try to start over Momentics and choose a new workspace.

• to the attention of RIM - a bug annoying to JDE

  In the Java development environment, there are annoying bug (maybe someone call a function ).

  When you start JDE it loads the class information and it takes time.

  OK, I'm going with him, because it is necessary

  But when I start JDE with empty workspace without a project within JDE waits until it loads the class information.

  And it sometimes takes a lot of time and I can't do a few steps with JDE until he finished.

  What information of class is JDE loading when there is no project to the workspace?

  This is normal.  It loads the classes of the BlackBerry API defined during this period.  If you have a workspace, it will also load the classes of your projects (this is why it takes more time).

  You will also notice that the older versions of BlackBerry JDE perform this operation faster due to the fact that there are more classes in each version of the BlackBerry JDE.