Enable direct access to memory.

Similar Questions

• Access invalid memory location during export for iOS error

  I was recently asked to convert an application for us flash on the iPad. When I try to publish the .ipa file, I get the following error:

  Access invalid memory location 0xceip = 0x55492db4

  I have no idea what could cause this and my google search of the error message came pretty empty. If I delete the document class and republish it works fine so I know it has something to do with my code but I don't have a clue where to start looking so I was hoping that someone else had a similar error and could point me in the right direction.

  Thank you very much

  -Ryan

  I was able to understand it through check and guess laborious. Just thought I'd share the bug in case someone else ever runs into it.

  A library third party I was using says try bad catch statements:

  try {}

  catch (Error :*){

  }

  No idea why the original author did it, probably never intended to write "error: *" and release shift fast enough after the "(" mais comme vous pourriez le soupçonne "Erreur" est un nom d'objet réservé à ne peut être déclaré en tant que paramètre variable) "

  When replaced by:

  try {}

  catch (error: Error) {}

  }

  the memory access bug went away. What is strange, is that the incorrect try/catch statement works fine when published in format swf, air or android and is only a problem with the converter of iOS and of course produced a very cryptic error.

  I used CS5.5 so maybe that this problem has been corrected (if not, I would say making it a compile error), but just thought I would post my findings.

• HP w2338h: invalid access to memory location

  I have a problem when I try to add Legacy hardware that were errors and says "invalid access to memory location" everyone here knows the solution?

  Hi@Back2Basic,

  Welcome to the HP's Support Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems

  .

  For the best experience on HP forum, see our Guide to HP Forums to learn more.

  Error in the operating system while adding equipment. Is this fair?

  I want to help you.

  I ask that you try to do the steps from the link below and check if it works.

  http://HP.care/2e8sE2u

  It will be useful.

  Happy announcement.

  Resolv_S

  Happy to help you. I work for HP
  
  Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
  Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

• Directly access an IP of D-Link camera

  Is it possible to directly access an IP camera. Don't know there is a block that can enter user and password but I don't know what it is. Can someone explain how I can directly access an IP camera in addition to the block is called.

  Thank you

  Andrew

  Hi André,.

  I guess you are trying to access the camera by MAX or LabVIEW. This would require the use of our driver NOR-IMAQdx. Unfortunately, our IP IMAQdx camera support is limited to the cameras manufactured by Basler and axis. Please take a look at the following link for more precision.

  http://digital.NI.com/public.nsf/allkb/4331B4AA3AE95233862574C200539A2F?OpenDocument

  So, I do not think that you will be able to access your D-Link IP camera via our software. I apologize for all that mind which can cause.

  Best regards

• TH3800.DLL loading of the causes "invalid access to memory location.

  Hello, new.

  I am writing a program of control of temperature thermotron for a school project and I'm having a problem with the drivers provided by Thermotron. I've unpacked their drivers and put them in the instr.lib folder, then I put the TH3800.dll included in C:\VXIpnp\WinNT\bin according to the guidelines. I am using the Student Edition of LabVIEW 2010 with SP1, and every time I load a VI library, I get an error message that says:

  Error loading "TH3800.dll".
  Invalid access to memory location.

  I have no idea what the problem is exactly and not sure what to do to fix it. Any suggestion would be appreciated.

  Thank you

  Simon

  I'm not positive, but it seems that is the drivers you have are corrupt, do not exist or are locked in memory somehow. It would certainly be a question that you don't want to appear with Thermotron, because they will have more details on their dll. I tried Googling on the subject and the name of the dll that is self open surprisingly little information. Certainly something to talk about them!

• Invalid access to memory location

  Dear all

  good your time

  I convert a labview 5.1.1 to 2008 (by convert forum) program and run it. before that, I install this 'http://www.keithley.com/support/keidoc_searchresult?keyword=2400&item_type=Software+Driver'.

  I was faced with this error: "error loading: file\ke24xx.dll directory invalid access to memory location".

  I do not install the other driver. because when I run this need VI (subsequently I have attached) to pnp driver (file ke24xx.dll confined) no other drivers especially those news similar to "http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=25B255F3AA83660EE0440003BA7CCD...". I want to just run the VI. my friends are running this with labview VI 2007 and pilot pnp.

  I don't know if there is the error due to the conversion of the VI or I need to install labview 2007.

  Please guide me! God gives you the right thing.

  Best regards

  Since you have yet to provide the dll and you do not have the dll or little matter what you say, I suggest that you ask on the subject of whether you got the code and DLLs of.

  Did you answer why don't you try the driver OR.

• Access no longer work after the abduction of (Server Essentials 2012 R2) Direct access

  Hello

  Ive been running around access to the company I work for, its been working well for almost a year.

  I removed a direct access and remote access via the menu "Roles and features" in the Server Manager, since then it is not working and when I try to Config/repair I get a message saying "anywhere access to your server is blocked.

  Ive updated the firmware on the router and the manual configuration of redirection to make sure it wasn't a problem with uPNP port

  Should I check that I can be removed when I removed direct access? Or what I need to change?

  I'm sure I did something stupid...

  Thanks :)

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• invalid access to memory

  I get an error indicating there was a problem invalid starting C:users\Kim\appdata\local\temp\charsmon.dll access to memory location. This box opens at startup. Anyone has any ideas how to fix this? Thank you

  Hi kayak.

   

   

  Try a clean boot (Vista and W7) http://support.microsoft.com/kb/929135 (with the exception of MSE). If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once don't forget to reset your system back to the normal state, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work. If you are using XP, see http://support.microsoft.com/kb/310353 and http://support.microsoft.com/kb/316434.

   

   

  Good luck

   

   

  Kosh

• Cannot start the network connection: invalid access to memory location

  Hi team,

  Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

  Thank you

  Sangaré

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Get "Invalid access to memory error"

  I imported all a Labwindow/CVI driver and I get "error loading"MyInstr.dll". Invalid access to memory location"when I try to open one of the screws

  I'm using LabView 2010 on a Windows 7 computer.

  This same DLL runs in a applications of the CVI.

  Hi bbwpdad,

  In order to better focus on what could be happening I have a few questions for you. If I understand "MyInstr.dll" is the one that you created in the CVI. Is this correct?  First of all, exactly how was created dll and update? In addition, what is the method signature, parameters, return value, etc.. ? Finally, how are you trying to use in LabVIEW? It's a knot to call a library function?

  Just in case, we have a good article on the use of the node to call a library function to reference the dll to

  https://decibel.NI.com/content/docs/doc-9069

  If all goes well that can get things started.

  Kind regards

• Cannot install Webroot software error: problem of direct access component - should close. incompatible tfswct.exe

  Original title: Direct access component problem - must close. incompatible tfswct.exe

  I uninstalled Shield Deluxe, restarted, then tried to start installing Webroot SecureAnywhere Essentials from the installation CD.

  I did not demand the product key so no Webroot software is installed.

  How to solve the problem of tfswctl.exe?

  Hi DW_758,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Install the applications as an administrator.

  HOW TO: Use the RUN AS command to start a program as an administrator in Windows XP

  http://support.Microsoft.com/kb/305780

• to try to correct a disk check error "cannot open volume for direct access.

  OK, I'm unable to run check disk utility I get this ' impossible to open the volume for windows direct access finished disk checking "I tried everything micrsoft has on there Web site. and the system is updated with service pack 3

  Boot from your Windows XP (optical) installation media.  Assuming that your BIOS is set to boot from the CD first (otherwise, ensure), you will see a message in the sense of «Press any key to boot from CD...» ».  Do as he says a few seconds (I usually have to press the space bar).  After a lot of clatter and echo, your property see the Windows Setup screen.  Type 'R' on the first line.  Yet once, banging and rattling and you you have started the Windows XP Recovery Console from the installation media.  First of all, it prompts you for the number of Windows Setup (which is usually C:\WINDOWS).  The model number of the directory of correct installation and you ask for the administrator password.  Type the word or press ENTER if it is not a.  You will then be prompted for the Windows XP Recovery Console.  HELP will give you a list of available commands.  MAP will show you the list of BIOS (not Windows) of the drive letters.  Type:

  CHKDSK/p :

  To run the check disk (not /f or/r).

  Good luck!

• When trying to start the disk check procedure, I get the answer, "cannot open volume for direct access. How can I fix?

  I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.

  * original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*

  The application-specific permission settings do not authorization for the application server COM with the CLSID
  {DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}
  the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_comp_exp.mspx?mfr=true

  In the opposite case

  http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html

  http://TechNet.Microsoft.com/en-us/network/bb545879

  http://www.blackviper.com/wiki/Network_Access_Protection_Agent

• prevent direct access via webmail

  I want to prevent direct access to common accounts through webmail. for the user X interpreter should be able to display "itsupport" via webmail only after have connected you to its indivisual ID and then open new window https://webmail.domain.ae/Exchange/itsupport and prevent it directly access itsupport via webmail as user X has the permission to access the itsupport

  Thank you

  Hi nouraAJ,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forums of Exchange Server.

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrgeneral/threads

• HP officejet 6800 e all on one: how to enable direct wireless printing

  Hello world
  How to enable direct wireless printing because my printer saying me that its disabled and I need to contact s Adminitrator or the person who installed the printer, which is me I did it by myself.
  So what is the solution pleaaaase?

  Hello and welcome to the HP support community!

  Press the "wireless Direct" icon on the control panel for your printer.

  Should look like this:

  If you press and hold down for 3 seconds, it should print the password to your devices (if the security has been selected).

  WyreNut