Enable SSH V2

Similar Questions

• Enable SSH on a PC6248 Server

  Hello

  I would like to enable SSH on a PC6248 server. In the CLI, I tried:

  # config

  (config) # ip ssh server

  SSH could not be activated.

  Nothing happens in the RAM log. What are the steps required to enable the SSH server?

  Thank you

  
  

• Disable telnet, enable SSH

  What is the best way to disable telnet on the public (T1) interfaces of my router and enable SSH? Can I do this without setting up access lists?

  Thank you

  Diego

  You can. Type

  'transport input ssh.

  on the line vty 0 4 and it will only accept ssh connections.

  If you add access lists using access-class, it will add another level of security.

  You should also generate a RSA key for the router global configuration using the command mode,

  generate encryption rsa key

  Before you type this command, make sure that the domain name is configured on the router.

  IP - domain name

  HS key mypubkey rsa cryptographic will show you the RSA key that is generated.

  HTH

• Enable SSH on the virtual server of telepresence

  Hello - did someone knows if it is possible to enable SSH on the server of telepresence for Virtual Maching (version 4.3)?

  I do not have access to the VMware console, but I would urge a capture of packages using the command "nettap.

  THX.

  Josh

  Dosen t TelePresence server have SSH access, the only College packet capture methods are from the console or web interface.

  Telepresence server, MCU, VCR IP and gateway Network Packet Capture

  Collect network of Cisco MCU/TS with the Web Interface packages

• How to enable SSH on vROps?

  Hello

  When I tried to connect through the console, it seems that disabled ctrl + alt + delete. How can I enable SSH on vROps?

  Kind regards

  Ramazan

  Hello

  Maybe this will help you http://imallvirtual.com/dude-where-are-my-vrops-xmls/.

  Best,

  Marti

• Script to enable ssh on ESXi host.

  I need a powercli script to enable ssh on single, multiple/all ESXi ESXi servers in clusters.

  With the permission of Alan Renouf. I modified slightly to be independent of the version. Have not tested, but it should work.

  Get-VMHost | {Foreach}
  Start-VMHostService - HostService ($_ |) Get-VMHostService | Where {$_.} ({Key - match "* SSH '})
  }

• ESXi4 enable SSH

  Hi all

  How to enable the SSH service do not have access to the remote server. Is this possible?

  The only access is available is VMware Infrastructure client.

  Best regards

  Play well.

  It's the same trick that I used. And has worked well for me.

  I have not found any problem related to a possible little sticky. Just use GZIP and TAR.

  A few days ago, I was looking on all Internet search engines to find out how to enable SSH on esxi.

  But on each of them, no body knew how to do this. So I decided to investigate all the vCLI Perl scripts and found the solution.

  Next time if I have another question I know where to ask for help (better than staying hours, around this).

  I think that you've already tried this, but for some reason you don't want to disclose.

  Perhaps because this isn't a recommendation from VMWare or VMware don't want this match or something else.

  Thanks for telling me that I wasn't the first person to know this trick.

  You're the man.

• How to enable ssh on ASA 5525

  Can I know how to set up remote to access the ASA 5525 via ssh

  I gave the following commands

  SSH 10.60.0.0 255.255.0.0 outside

  SSH 10.60.0.0 255.255.0.0 dmz

  SSH 10.60.0.0 255.255.0.0 inside

  SSH timeout 5

  but I am not able to access the ASA via ssh. I have to add any other command

  you need a public/private key pair:

  ASA (config) # crypto key generate rsa key general module 2048

  a user name:

  ASA (config) # username, password testuser testpass

  and the system needs to know where are your useraccounts:

  ASA (config) # aaa authentication ssh LOCAL console

  Edit: And not leaving SSHv2:

  ASA (config) # ssh version 2

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Enable SSH and disable Telnet

  I try to activate SSH on a 3560G switch so I can't disable Telnet.

  Some referred to a "sh-ssh' to see if I have ssh on the switch. It does not show. I also have 'transport input ssh' and ssh is not a valid input method.

  I've decided to update the IOS on the switch. I am now at 12.2 (52) SE.

  But I can not configure SSH. I get the same results as mentioned above.

  Since it is the latest version of IOS can't I not assume that it contains SSH? Or do I need to download another version of IOS who specifically has SSH in?

  Thanks for your help

  There are two versions of the images switch Catalyst (K9/SSH and SSH). If you do a ' show versi
  on "it displays the latest version of IOS running on the switch. If you run a non - ssh version, you must upgrade to a ssh (K9) image.

  Concerning

  Farrukh

• Enable SSH access to administrative accounts non-standard

  Hi all

  According to the administration of VCS Guide (p 298, x8.5.1), he suggests that "in general, local administrator accounts are used to access the VCS on its web interface or the interface API, but are not allowed to access the CLI".

  Well, I would like to make an exception then, how do I do this. The sentence that precedes suggests that exceptions are possible, but I can't find additional references.

  We looked at the ' / etc/ssh/sshd_config ', but of course, it is a read-only file structure.

  Any ideas?

  See you soon

  Chris

  I don't think it's possible, outside the admin account to access the CLI.  I know that the sentence says "In general", but to me, it reads as if all CLI access is reserved to all except the admin account.

• Enable SSH via Powercli

  Is there a way you can toggle ssh via Powercli

  Hello, vicdaw-

  Welcome to the communities.

  Yes, you can turn on/off (start/stop), SSH (and VMHost services in general) with the cmdlets Start-VMHostService and VMHostService Stop .  As such:

  ## start the SSH service on the given hostGet-VMHostService -VMHost myVMHost0 | ?{$_.Label -eq "SSH"} | Start-VMHostService
  
  ## stop the SSH service on the given hostGet-VMHostService -VMHost myVMHost0 | ?{$_.Label -eq "SSH"} | Stop-VMHostService -Confirm:$false
  

  If you want to change the strategy of starting services, you can use Set-VMHostService. Enjoy.

• enable SSH

  is it possible to toggle the remote (SSH) of PowerCLI support?

  Get-VMHost | {Foreach}

  Stop-VMHostService - HostService ($_ |) Get-VMHostService | Where {$_.} Key - eq "TSM - SSH"}) - confirm: $false

  }

• ESG, change hostname and enable the SSH service

  How do I change hostname for ESR or DLR - VM?

  also assuming that I have doesn't enable the SSH service in the initial configuration. How to allow him later of GUI or CLI and check the status of the SSH service?

  > How can I change the hostname for ESR or DLR - VM?

  You can't at the moment from the GUI, until now the REST API calls. vExpert: Tomas Fojtahas this blog about using PowerCLI:

  Renaming edge Gateway | Tom Fojta & #039; s Blog

  > also assuming that I have does not have activate the SSH service in the initial configuration. How to allow him later of GUI or CLI and check the status of the SSH service?

  From the Web of GUI client:

  1 / go to Networking & Security

  2 / NSX edges, then select the edge in question

  3 / on stocks on the block, select 'change CLI Credentials. "

  

  4 / there you can enable SSH

  Check: If SSH is already on the 'case' is already selected. Also you should be able to SSH into the edge now.

  HTH,

  Roland

• Activation of SSH on N2000

  Hello

  I'm looking to enable SSH/telnet to my Dell PowerConnect N2048 management. Currently I get timeouts when connecting to one. I followed the instructions on several forum posts and this guide:

  

  However, at this stage, I am completely puzzled. I generated the RSA and DSA keys, and the SSH server has been successfully activated. I've linked the VLAN 1 to a static IP address, which I suppose worked correctly (see IP in show run) I also created a user with the privileges of level 15. Currently, I am only able to access the console via a serial cable. SSH connection does not require a user name and expires instead. Here is the result of intellectual property see the ssh:

  SSH server active. Port: 22
  Levels of Protocol: Versions 1 and 2.
  SSH connections in use:... 0
  Maximum number of SSH Sessions:... 5
  SSH Session Timeout:... 600
  RSA key has been generated.
  DSA key was generated.
  SSH public key authentication is disabled.

  Active inbound sessions.

  User name of the IP address of the session idle time
  --------------- --------------- ------------ ------------

  Am I missing something?

  Everything seems good. I sent you a friends asking for additional information from the switch. The request of friends includes my email address. Additional information will help me to get a better look at the switch. I look forward to your email.

  Thank you

• SSH not supported

  Dear professionals,

  I have a 4506-E with the following information. I tried to enable ssh on but is not possible. It has a known domain ip and host name.

  Software, Cisco IOS - XE, Copyright (c) 2005-2010, 2012 by cisco Systems, Inc.
  All rights reserved. Some components of the Cisco IOS - XE software are
  distributed under the GNU General Public License ("GPL") Version 2.0. The
  software licensed code GPL Version 2.0 is a free software that comes
  WITHOUT ANY WARRANTY. You can redistribute it and/or modify it
  Code GPL under the terms of the GPL Version 2.0. For more details, see the
  documentation or "Mention of license" file that accompanies the IOS - XE software.
  or the applicable URL listed on the brochure that accompanies the IOS - XE
  software.

  Information about the license for "WS - X 45-SUP7L-E"
  License level: ipbase Type: Permanent
  Next reboot license level: ipbase

  Variable BOOT = bootflash:cat4500e - universalk9. Spa.03.04.04.SG.151 - 2.SG4.bin

  Please, I would like to know what the problem is.

  Salvation;

  Your switch is not boot through cat4500e-universalk9. SPA. 03.04.04.SG. 151 - 2.SG4.bin, his normal starting with IOS (no crypto K9 image).

  If you see the message below:

  I see that the boot variable is not the same as the software Cisco IOS, IOS - XE Software, switch Catalyst 4500 L3 (cat4500e-UNIVERSAL-M), Version 03.04.02.SG , RELEASE SOFTWARE (fc1)

  This is due to the new image you upload do not match the value md5 or during the download, the image corrupt.

  Thanks & best regards;