Disable telnet, enable SSH

Similar Questions

• Enable SSH and disable Telnet

  I try to activate SSH on a 3560G switch so I can't disable Telnet.

  Some referred to a "sh-ssh' to see if I have ssh on the switch. It does not show. I also have 'transport input ssh' and ssh is not a valid input method.

  I've decided to update the IOS on the switch. I am now at 12.2 (52) SE.

  But I can not configure SSH. I get the same results as mentioned above.

  Since it is the latest version of IOS can't I not assume that it contains SSH? Or do I need to download another version of IOS who specifically has SSH in?

  Thanks for your help

  There are two versions of the images switch Catalyst (K9/SSH and SSH). If you do a ' show versi
  on "it displays the latest version of IOS running on the switch. If you run a non - ssh version, you must upgrade to a ssh (K9) image.

  Concerning

  Farrukh

• WAP561 To Telnet and SSH

  Hello

  We have two WAP561 devices and they delivered with firmware 1.0.3.4. In this firmware release notes, there is open opposition with reference number CSCty22825, declaring that telnet and ssh is disabled in the interface chart and SNMP. In the notes of the other releases, as 1.1.0.4, this caveat is no longer present. We have improved our 1.1.0.4 devices, over telnet and ssh section is still not present in the GUI.

  Is there a way to enable ssh on these devices? In the administration guide, there should be a section called 'Telnet and SSH', but it is not present in the GUI. We also checked with the emulators with different firmwares. Still no telnet and ssh, section.

  Your help is very appreciated.

  Thank you

  Hello

  These options were available in a very old firmware (the first version) which is no longer present on the cisco.com site and unfortunately I do not have. For security reasons, these options have been removed the new firmwares available.

  I hope that the information provided was useful.

  If you have any other questions do not hesitate to contact me.

  Best regards

• Telnet and SSH on PIX515E does not

  I have two PIX515E (primary and Fail-over) and I can't access it via telnet or SSH.

  I can access only once they have restarted and then they react to me and close the connection.

  the version of the show from the primary is as below:

  Cisco PIX Security Appliance Software Version 8.0 (3)

  Version 6.1 Device Manager (1)

  Updated Wednesday 6 November 07 19:50 by manufacturers

  System image file is "flash: / pix803.bin.

  The configuration file to the startup was "startup-config '.

  Primary up to 3 days 19 hours

  up to 13 hours and 18 minutes failover cluster

  Material: PIX-515E, 128 MB RAM, Pentium II 433 MHz processor

  Flash E28F128J3 @ 0xfff00000, 16 MB

  BIOS Flash AM29F400B @ 0xfffd8000, 32 KB

  Hardware encryption device: VAC + (Crypto5823 revision 0 x 1)

  0: Ext: Ethernet0: the address is 0019.e762.f577, irq 10

  1: Ext: Ethernet1: the address is 0019.e762.f578, irq 11

  The devices allowed for this platform:

  The maximum physical Interfaces: 6

  VLAN maximum: 25

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Cut - through Proxy: enabled

  Guardians: enabled

  URL filtering: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  VPN peers: unlimited

  This platform includes an unrestricted license (UR).

  Serial number: 810417710

  Activation key running: 0x7785a916 0x349cafef 0x49afea88 0x8bbd3f92

  Modified configuration of enable_15 to 12:49:25.499 EEDT Sunday, July 26, 2009

  can someone help me solve this problem please.

  I would upgrade to 8.2. I don't have the bug number, but you should be able to find it in the Bug Toolkit.

• Disable Telnet on 3448P Dell PowerConnect switch

  Hi, I switch from telnet to ssh, but I do not see where to disable the telnet service. Any help?

  Thank you

  JP.

  
  

• Enable SSH V2

  Hi, I have a 2960 switch 24TC-l with c2960-lanbasek9 - mz.150 - 1.SE.bin and SSH v1 active.

  When I try to enable SSH v2 swith tell me that I need to create a rsa key encryption. I generated the rsa cryptographic key with 1024 bits, and when I try to activate SSH v2 I get the same message.

  Damien,

  This SSH session should not break the recommended operation. However, for maximum reliability, I personally would say using another method to access CLI (Console or Telnet) just to make sure that the SSH session is not get corrupted. In all cases, if the SSH session has been closed until the SSH keys are generated again, you no longer able to SSH into the device.

  Best regards

  Peter

• Telnet or SSH to AP 1142

  Hello

  I am trying to connect to an access point to distance within our network... is it possible to activate telnet or ssh access point by WCS or https. Please let me know

  Knockaert

  WCS, you could push a model AP.  On the 'the AP settings' tab, you can enable ssh and telnet access and then apply it to the AP.

  http://www.Cisco.com/en/us/partner/docs/wireless/WCS/6.0/Configuration/Guide/6_0temp.html#wp1064409

• Information about TelNet and SSH

  Hi all... IM new here

  Its my first qstion

  Q: I would like to know more about TelNet and SSH... How... can its work you explain this...?

  Hi Muhammed,

  Welcome to the Microsoft forums.

  I understand that you need to know about TelNet and SSH. I'll help you with the information.

  The Telnet utility to connect to other computers over a local network or on the Internet. Unlike a modern Web browser, Telnet uses only the controls text to interact through the network. While this method is a little outdated, it is still used by advanced users to test a network or perform maintenance on the system. Telnet is included with Windows 8, but is disabled by default. You can use the control panel to activate Telnet and then perform the network with application basic commands.

  a. open Control Panel. This can be done through charms, Windows + X, or by conducting a search on the start screen.

  b. Select programs from the main menu.

  c. click on or turn off Windows features turn on and approve the application administrative.

  d. check the Telnet Client and Telnet Server (depending on what you need).

  e. click OK.

  You can see the following TechNet article to learn more about TelNet.

  http://TechNet.Microsoft.com/en-us/library/cc732339 (v = ws.10) .aspx

  SSH (Secure Shell) allows you securely transfer files between computers on a network. All the data involved in the SSH session is encrypted in order to protect against hackers. Once SSH is installed on your computers and servers, you can create passwords for individual users, using programs included in the installation of SSH. If you need to SSH to a remote computer, you need to download a third-party program to connect via SSH.

  I hope this helps.

  Please report if the problem persists and we will be happy to help you further.

• How to enable SSH on vROps?

  Hello

  When I tried to connect through the console, it seems that disabled ctrl + alt + delete. How can I enable SSH on vROps?

  Kind regards

  Ramazan

  Hello

  Maybe this will help you http://imallvirtual.com/dude-where-are-my-vrops-xmls/.

  Best,

  Marti

• What modules and extensions I disable and enable to allow the files to download for the email as attachments?

  Whenever I try to attach a file to an e-mail, I get the error message "your upload of file failed, please try again". I use Windows XP and have deleted Firefox and reinstalled the browser to the latest version, but also a previous version. I wonder if an add-on or extension must be disabled or enabled allowing any file to be attached.

  Worst case senario is to use error. All disable and enable a.

  Update your plugins to the latest version. Make sure you are aware:

  • https://www.Mozilla.org/en-us/pluginCheck/

  If you see problems see also:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Internet works fine then stops working until I have disable and enable the adapter

  I have this problem for about 3 weeks, I have an ISA 2004 on windows server 2003 server connected to the LAN and WAN, get internet of Wan, the question is the always-connected WAN connection but the show me there is no Internet to disable and enable! .

  I have updated the driver, do back down, reinstall and change of management of the power to the unit but the problem still exist and appear every day in the morning.

  can someone help me solve this problem?

  Thanks in advance

  Hello

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  Please post your question in the TechNet Forum.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Enable SSH on a PC6248 Server

  Hello

  I would like to enable SSH on a PC6248 server. In the CLI, I tried:

  # config

  (config) # ip ssh server

  SSH could not be activated.

  Nothing happens in the RAM log. What are the steps required to enable the SSH server?

  Thank you

  
  

• Enable SSH on the virtual server of telepresence

  Hello - did someone knows if it is possible to enable SSH on the server of telepresence for Virtual Maching (version 4.3)?

  I do not have access to the VMware console, but I would urge a capture of packages using the command "nettap.

  THX.

  Josh

  Dosen t TelePresence server have SSH access, the only College packet capture methods are from the console or web interface.

  Telepresence server, MCU, VCR IP and gateway Network Packet Capture

  Collect network of Cisco MCU/TS with the Web Interface packages

• Telnet and SSH

  Is it possible to have a different public IP (i.e. 66.102.7.000) address to telnet and SSH for the ASA 5510 remotely?  If it is possible, how you would install the telnet and SSH?  The config is attached.  Thank you.

  Laura

  laurabolda wrote:
  Thanks for your prompt response, Jon.
  For clarification, if my computer IP address is 66.102.7.10, can I SSH to the ASA (outside interface 109.66.25.80)? If I can, how would you set it up on the ASA?  Is it the same command as your previous response?
  Thanks.
  Laura
  

  Yes Laura he would be-

  SSH outside 66.102.7.10 255.255.255.255

  Jon

• 11g: dbms_output.disable / dbms_output.enable loses messages

  The documentation says:

  --------

  DISABLE the procedure

  This procedure disables the calls to PUT , PUT_LINE , NEW_LINE , GET_LINE , and GET_LINES and empty the remaining information buffer.

  As with the ACTIVATE procedure, it is unnecessary to call this procedure if you use the SERVEROUTPUT option to SQL * more.

  --------

  I have a PL/SQL A script, which uses the dbms_output to generate another script B (coil dbms_output in a file).

  However the script calls a PL/SQL C package, which uses the dbms_output to log error/warning/debug messages.

  This comes into conflict with the generation of the script the script B.

  So I tried to wrap the invocation of the C PL/SQL package with dbms_output.disable / dbms_output.enable.

  However, as well as documented above DISABLE "...". purges the remaining information buffer. »

  But here are without flush for dbms_output .

  I can not easily rewrite a legacy code to replace the generation of script B via dbms_output.

  Is there a way to bypass?

  Best regards

  Frank

  You can save your lines of DBMS before disabling the DBMS. as in:

  https://Doganay.WordPress.com/2016/02/11/DBMS-output-save-lines-before-disable/