Enabling multicast on the inside of transparent mode network

Similar Questions

• I can't select the blend in transparency mode. Stuck on normal.

  Not sure why all of a sudden I can't use the transparency tool. I can adjust the transparency, but not the blend mode. I try to get to multiply.

  Help, please.

  

  Can you show us what you have selected with a screenshot with the expanded layer panel.

• After you enable SLI on the Satellite x 200 mode the screen goes black

  Hi all

  my name is Alessio and I encounter the following problem with my Satellite x 200-24e with Vista home 32-bit:

  Recently, I updated the operating system and yesterday I updated the VGA driver with the latest version available on the web site of Toshiba (display-20080904102618), everything worked fine but when I activated mode SLI the screen went black.

  I restarted the laptop and I tried to boot Vista on a regular basis, but I still got black screen.
  Then I started Vista in safe mode and reload the VGA drivers to set the SLI mode since the safe mode did not identify the model VGA.
  Can anyone help me solve this problem and get the SLI mode working again (I was able to set the SLI mode before update the VGA driver)?

  Thank you

  This wonderful s information.
  It of strange that the screen was dark after the SLI has been activated but it looks like it's working now.

  Thanks for your comments

• Custom component that allows enabling/disabling of the form in edit mode entries

  I am looking for a custom component that allows the switching of the inputs of form in edit mode. I saw a demo a few months back, maybe on one of the Flex sites blog "evangelist". If someone could point me to the point it would be appreciated. Thank you.
  
  Lokesh-

  http://www.quietlyscheming.com/blog/components/IPE-controls/

• transparent mode with AIP-SSM-20

  I currently have an ASA5510 routed with AIP-SSM-20 mode.

  It is necessary to use a connection in optical fiber between the ASA and ASA on the campus, so the AIP - SSM will need to be removed and replaced by the SSM - 4GE.  This section should present no problems.

  However, this will remove the IPS device, and I always want to use IPS.

  So what I think is to get another ASA5510, install the AIP - SSM, configure ASA for transparent and put it between the inside of the ASA routed and my local network.  The ASA transparent would be strictly works in the form of an IPS appliance.

  The installation program should look like this:

  Internal LAN <> ASA transparent with IPS <> routed ASA <> WAN

  The AIP - SSM can always perform with the ASA in transparent mode IPS?

  Is it possible to configure the ASA and AIP - SSM such as traffic to and from a particular server completely ignores the AIP - SSM?

  I have a couple of file servers which generate heavy traffic and can overload the AIP - SSM.

  Kind regards.

  AFAIR, it is no installation AIP in a transparent firewall problem.

  "The SAA in transparent mode can execute an agreement in principle.  In the event that the AIP fails,

  the IPS will fail-open and the ASA will continue to pass traffic.
  
  However, if an interface or cable fails, then traffic will stop.  You
  
  would need a failover pair to account for this failure event, which
  
  means another ASA and matching AIP."
  
  

  And no there is no problem to exclude certain hosts/ports/subnets inspection by IPS via MPF.

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/IPS.html#wp1050744

  What I consider however is however if the ASA 5510 as second level firewall for 5520 s will be enough.

  http://www.Cisco.com/en/us/products/ps6120/prod_models_comparison.html

  HTH,

  Marcin

• ASA in transparent mode with LAN base active failover / standby?

  Is it possible to have a pair of the SAA in transparent mode with LAN-based failover active / standby? I configured the portion of failover and then configured the transparent mode and it erased my failover configuration. Is this supported configuration, and if so are there at - it an example?

  Thanks in advance

  Yes. It is possible to have a pair of ASA in transparent mode with LAN-based failover active/Standy. You must perform the configuration of failover after conversion of the appliance in transparent mode.

  I saw an example on the cisco site, but I'll give you an example of one of the projects I run. Infact its very easy to configure failover in transparent mode. Less work.

  I have listed the configs on both the firewall for your reference

  Main firewall

  ============

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  No tap

  !

  interface GigabitEthernet0/1

  nameif inside

  security-level 100

  No tap

  !

  interface GigabitEthernet0/2

  Shutdown

  No nameif

  no level of security

  !

  interface GigabitEthernet0/3

  Failover LAN Interface Description

  !

  192.168.9.2 IP address 255.255.255.0 watch 192.168.9.7

  failover

  primary failover lan unit

  local failover FAILINT GigabitEthernet0/3 network interface

  failover abcdef keys

  failover interface ip FAILINT 172.16.9.1 255.255.255.0 watch 172.16.9.7

  The secondary firewall

  =================

  failover

  secondary failover lan unit

  local failover FAILINT GigabitEthernet0/3 network interface

  failover abcdef keys

  failover interface ip FAILINT 172.16.9.1 255.255.255.0 watch 172.16.9.7

  int GigabitEthernet0/3

  No tap

  Hope the above helps.

• inside the host does not ping external host in transparent mode

  Hi all I need urgent help on this pls I have host on ip add 1.1.1.2/24 connected inside interface of the pix with ios 7.0 in transparent mode. and the external interface of the pix connected to a router IP 1.1.1.1/24.i enabled icmp inspection.i can see the router arp entry into the host and the host arp entry in the mac address router.both are well learned by the pix. no traffic flow form the host to the router. There is no access on the pix of pix.the list does not create an arp entry in the stange very pix. I tried to manuaaly add the entry:

  ARP in 1.1.1.2 0011.d80d.f6ac it gives an error <1.1.1.2>not allowed. network address I do not get it .my question is why the pix don't is not create entry arp. what could be the problem. could someone pls help me with this thanks pls.

  Assane

  Lol this is not as you mentioned. I'll explain the communication all in detail. I hope this helps.

  Assumptions:

  PIX configured to L2, with outside as 0 and inside as 100. insidehost on inside the network and external network configured outsidehost.

  scenario 1

  ==========

  If pix is not configured with the IP address, all IP packets are dropped and syslog Id 322004: no management IP address configured for transparent

  Firewall is saved. So lets see how communication works on L2

  outsidehost tries to communicate with insidehost. ARP request is from outsidehost and is sent through dissemination and it is received by PIX and sent to the inside network, without change.

  Return of InsideHost and the response is sent through to the outsidehost. When you see the arp on the outsidehost and the insidehost entries you will find the corresponding arp entries.

  PIX will forward arp request/reply.

  You can give the command "local host" and you won't see any entries created on the box.

  2nd scenario

  ==========

  An ip address is configured on pix and insidehost starts communication with the outsidehost. Communication is from top to bottom and will allow pix.

  No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

  Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from insidehost to outsidehost.

  Connection between outsidehost and insidehost is denied because there is no access list to allow traffic from low to high.

  You can give the command "local host" and you will see the entrance to insidehost, outsidehost.

  3rd scenario

  =============

  An ip address is configured, created in order to allow the circulation of outsidehost insidehost and applied to the external interface of access list access list.

  No change in the behavior of the ARP. Exactly as mentioned in scenario 1.

  Given that the IP address is provided to the box, entered the local host is created and formed connection for traffic from outsidehost to insidehost.

  Access list being present to allow the traffic, the connection is allowed and entry is created in the box.

  Hope that the foregoing erases the entire communication L2 and the communication of different security levels.

  I hope this helps.

• Cisco WSA: Is it possible to use the web proxy in transparent mode without WCCP router?

  Hello!

  I would like to use Cisco WSA as a web proxy in a transparent manner (without any configuration of client web browsers), but I do not have a WCCP router. So, is it possible?

  If so, how?

  Thank you

  Stephane Walker

  Hi, Stéphane

  The only alternative to WCCP is ACB (the policy-based routing). With a simple configuration on the router, you can redirect traffic defined also interesting by the WSA access list. On the ASO you must configure transparent mode (security-> Web Proxy Services-> the settings of-> Mode Proxy: Transparent). You should also make sure proxy listens on port 80 and HTTPS proxy is enabled (on port 443) If you want to redirect HTTPS traffic as well.

  Cisco router configuration example

  !
  access-list 110 permit tcp any any eq www
  !
  proxy-redirect allowed route map 10
  corresponds to the IP 110
  set ip next-hop xxx.xxx.xxx.xxx
  !
  interface ethernet0/1
  proxy-redirect IP policy route map
  !

  xxx.xxx.xxx.xxx is the IP address of the proxy in such a case and access-list 110 sets web traffic (HTTP-TCP/80) also interesting.

  The biggest drawback of this solution is the lack of troubleshooting. If the proxy will go down because some reason router will keep redirecting traffic causing the cutoff of internet access.

  Cisco routers out material should also have an option to configure policy routing based.

  / Artur

  PS. It is not possible to place the WSA online between the clients and the internet.

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why ASA in transparent mode require same subnet ip to that of the connected network

  ASA transparent mode, why it is necessary to keep the management ip on the same subnet to the connected network?

  What happens if I keep managing ip in a different subnet as the network connected?

  If I only did traffic to move through to the asa and why?

  thanxs.

  Hello Vijay,

  As you say you can use another, that is right, but the thing is that the IP address of management is not only used to draw management.

  Who was you are missing the point.

  That the IP address assigned to the ASA as a whole also will be used for ARP requests when the ASA does not know where the destination hosts lies and is not on the same subnet as the ASA.

  It will serve as a source for packages destined to a syslog server, server AAA, Netflow server, SNMP server, and any package that ASA will have to create so in that spirit the routing of the network will have to be modified to work with that.

  If you come to realize that the routing of the network works with a different management on the transparent address IP address then you can do it. I can assure you that I have seen this scenario before working with no problems at all BUD.

  Just to remember to Note all useful posts like this

  Looking for a Networking Assistance?
  Contact me directly to [email protected] / * /

  I will fix your problem as soon as POSSIBLE.

  See you soon,.

  Julio Segura Carvajal
  http://laguiadelnetworking.com

• Some Java applets do not work after the installation in silent mode, resolved in tilting head "enable Java content in the browser" - why?

  We have about 1 800 workstations with Windows 7 (32-bit and 64-bit) running different versions of JRE Java 6 update via update 7 51 32.  Most are on 6 45 update.  We would like to standardize on update of Java 7 51 (32-bit) and get everyone updated to this version for security reasons.

  For the last two weeks, we had trouble with our driver prior to installation.  What we are seeing, it of that our procedure successfully closed all open Internet Explorer Windows and processes related to Java, uninstall all older versions of JRE Java and says then successfully installed of the update of Java 7 51.  The Java Control Panel works.  We can even take Internet Explorer to check the Java Version or Java Tester - what Version of Java are you running? and confirm that the Java applets on these sites load (although the latter only works after adding the site to the list of site exceptions); However, when the testers try to access our system Kronos Workforce Central 6.3.10, used by this system Java applets do not load.

  We tried the following things, which none worked:

  • Empty the Internet Explorer browser cache and cookies.
  • Clear the local Java cache.
  • Restart the computer.
  • Reset Internet Explorer settings, including personal settings.

  Go to the Panel control Java, ranging in the Security tab, uncheck "enable Java in the browser content", the only thing that works based on apply, press OK in the pop-up window, checking the box "Enable Java in the browser content", press OK, press OK in the pop-up window and then restart Internet Explorer.  It is only after this point, all Java applets, including those used by Kronos Workforce Central 6.3.10, work.

  What I need to know, is how I can automate the reset procedure from the box "Activate Java content in the browser" after installation, or I'm something wrong or missing a step in automatic installation that is originally for this?

  We use Microsoft SCCM 2007 R3 to perform this upgrade, and everything is run on the client computer by using the SYSTEM account.  First of all, the "javaclean.ps1" PowerShell script is run, with part of the process of command line change of the strategy of running script PowerShell for Bypass.  This script handles the closure of Java-dependent applications and Java deals and uninstall older versions of Java.

  javaclean.ps1:

  #Find all Java products, excluding the automatic update that actually is uninstalled when the main installation is removed.

  write-host "If you are looking for all versions of Java installed" - ForegroundColor yellow

  [table] $javas = Get-WmiObject-query "select * from win32_Product where (name as" Java % ' or name like '% of Java (TM)' or "J2SE %") and <>the name «Java Auto Updater»»

  If ($javas.count - gt 0)

  {

  write-host "Java is already installed" - ForegroundColor yellow

  #Get all Java processes and kill them. If java is running and processes are not killed then this script will call a restart suddenly.

  [table] $processes = Get-Process-name "Java * ' #-erroraction silentlycontinue

  $processes += get-Process - name "iexplore" #-erroraction silentlycontinue

  $processes += get-Process - name "firefox" #-erroraction silentlycontinue

  $processes += get-Process - name 'chrome' #-erroraction silentlycontinue

  $processes += get-Process - name "jqs" #-erroraction silentlycontinue

  $processes += get-Process - Name "jusched" #-erroraction silentlycontinue

  $processes += get-Process - Name 'jp2launcher' #-erroraction silentlycontinue

  If ($processes. Count - gt 0)

  {

  foreach ($myprocess to $processes)

  {

  $myprocess.kill)

  }

  }

  #Loop through the Java products installed.

  {foreach ($java to $javas)

  write-host "Uninstall" $java.name - ForegroundColor yellow.

  $java. Uninstall()

  }

  }

  Once this script is complete, SCCM calls a script VBS "install.vbs" to perform the installation of Java JRE 7 day 51.

  install.vbs

  '* ********************************

  '*

  ' * Script: install JRE 7 routine

  '*

  ' * Date: 14/03/14

  ' * Author: [REDACTED]

  ' * Rev: 1.0

  ' * Notes:

  '*

  '* ********************************

  '--------------------------------

  ' / / / Common

  '--------------------------------

  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  Set objWshShell = CreateObject ("WScript.Shell")

  «Get the system architecture»

  Protected colSys: Set colSys = GetObject("WinMGMTS://"). ExecQuery ("SELECT AddressWidth FROM Win32_Processor", 48)

  Dim objSys

  For each objSys in colSys

  If objSys.AddressWidth = 64 then bolIs64Bit = True

  Next

  'Get the operating system

  Dim colOS: Set colOS = GetObject("WinMGMTS://"). ExecQuery ("" Select * from Win32_OperatingSystem ", 48")

  Dim objOS

  For each COS in colOS

  If left (objOS.caption, 20) = 'Microsoft Windows 8' then

  bolIsWin8 = True

  WScript.Echo "win8.

  End If

  If left (objOS.caption, 22) = "Microsoft Windows 8.1" Then

  bolIsWin81 = True

  WScript.Echo "win81."

  End If

  Next

  ' Set 32-bit directory program files

  If bolIs64Bit = True Then

  strPFILES = "Program Files (x 86)".

  strSYSDIR = "SysWOW64".

  Else strPFILES = "Program Files."

  strSYSDIR = "System32".

  End If

  ' Set repertoire_windows

  strWIN = objWshShell.ExpandEnvironmentStrings("%windir%") "

  'Set the current directory ".

  strCurrentDir = objFSO.GetParentFolderName (Wscript.ScriptFullName)

  ' Set computer name

  strCompName = objWshShell.ExpandEnvironmentStrings("%computername%") "

  '--------------------------------

  ' / / / Main script

  '--------------------------------

  '--------------------------------

  ' / / / Installation using .msi & capture exit code

  '--------------------------------

  ' intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\package.msi" "" & "TRANSFORMS =" "" & strCurrentDir & _)

  ""\transform.mst"" "ALLUSERS = 1 Reboot = ReallySuppress/SB»(, 8, True)"

  ' wscript.quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Create the folder structure if it does not already exist

  strFullPath = 'c:\Windows\Sun\Java\Deployment' "

  "How many levels are there in the path?

  nLevel = 0

  strParentPath = strFullPath

  Do until strParentPath = «»

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  nLevel = nLevel + 1

  Loop

  ILevel = 1 to nLevel

  "Path of directory to the iLevel level to understand

  strParentPath = strFullPath

  For j = 1 To nLevel - iLevel

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  Next

  ' Is it exist directory? If not, create it.

  If objFSO.FolderExists (strParentPath) = False Then

  Set newFolder = objFSO.CreateFolder (strParentPath)

  End If

  Next

  "Kill process

  objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True

  objWshShell.Run "taskkill /F /IM firefox.exe", 8, True

  objWshShell.Run "taskkill /F /IM chrome.exe", 8, True

  objWshShell.Run "taskkill /F /IM javaw.exe", 8, True

  objWshShell.Run "taskkill /F /IM java.exe", 8, True

  objWshShell.Run "taskkill /F /IM jqs.exe", 8, True

  objWshShell.Run "taskkill /F /IM jusched.exe", 8, True

  "Copy deployment files

  objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True

  objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True

  "Disable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop t REG_DWORD 0 f d", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v EnableLUA /t REG_DWORD /d 0 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM/v ConsentPromptBehaviorAdmin t REG_DWORD 0 f d", 8, True"

  "End If

  "Install application".

  intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\jre1.7.0_51.msi" "IEXPLORER = 1 AUTOUPDATECHECK = 0 = 0 JU JAVAUPDATE = 0 WEB_JAVA = 1 ALLUSERS = 1 Reboot = ReallySuppress/qn", 8, True ")

  "Enable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop /t REG_DWORD /d 1 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM EnableLUA /t REG_DWORD /d 1 f v", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 f", 8, True"

  "End If

  WScript.Quit (intExitCode)

  '--------------------------------

  ' / / / Installation via .exe on network

  '--------------------------------

  "objWshShell.Run" "" "& strCurrentDir &"\Setup.exe"" s - sms - f1 "" "& strCurrentDir & _"

  "" "\setup.iss" "-f2" "" & strWIN & "\Temp\Install-app.txt" "", 8, True

  "Need to turn off the security warning opening the file first.

  Set objEnv = objWshShell.Environment ("PROCESS")

  objEnv ("SEE_MASK_NOZONECHECKS") = 1

  ' intExitCode = objWshShell.Run ("" "& strCurrentDir &"\jre-7u45-windows-i586.exe"" /s /v "" / norestart "& _)

  ("" "TRANSFORMS =" "" & strCurrentDir & "\Tribe-jre7.mst" "", 8, True)

  ' WScript.Quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Then turn it back on.

  objEnv.Remove ("SEE_MASK_NOZONECHECKS")

  '--------------------------------

  ' / / / Features

  '--------------------------------

  Help on this issue would be much appreciated!

  It turns out that it is actually a problem with Kronos Workforce Central.  We had the parameter 'site.java.plugin.CLSID.familyVersion' as an application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the CLSID Java Java 6.  After update this value to "clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93" (the universal CLSID of Java), this problem does not occur when the automatic upgrade of Java.

  We also have good Java 6 and 7 in our environment and did during our implementation of Kronos, so I don't know why we used the Java 6 CLSID in the first place.

  Detective Conan!

• Cisco ASA 55XX Transparent mode through a VLAN

  Hello team Cisco Forum!

  In a scenario where the Cisco ASA is in Transparent mode, it is possible to route the traffic of L2 other VLAN different that the VLAN native IP for the firewall management lies?

  Switches on the outside and the inside of the interfaces of the SAA are in trunk mode, and I'm moving ttraffic VLAN L2 from inside to outside and vice versa by using filters on switches (switchport trunk allowed vlan).

  Thank you in advanced for your support and comments!

  Yes it is possible, but you will be limited to 8 VLAN, or more precisely, 8 interfaces BVI so it's not a scalable solution.  The problem is that you will need to have different VLANS to the same subnet at both ends of the SAA.

  To clarify this point, lets say, you use the interface Gig0/1 and Gig0/2.  Gig0/1, you would set up subinterfaces with VLAN 2, 3 and 4.  Now, if you try to configure the same VLAN on Gig0/2, you will get an error saying something like this VLAN is already configured on another interface. I don't remember the exact error.

  So to get this working, you need to configure Gig0/2 with subinterfaces for VLAN... lets say... 5, 6 and 7.  you would then associate VLAN 2 and 5 with BVI 1, VLAN 3 and 6 with 2 Virgin Islands British and VLAN 4 and 7 with 3 British Virgin Islands.  Each interface BVI would have its own IP address for the subnet on which is to be filled in all of the ASA.

  --

  Please do not forget to select a correct answer and rate useful posts

• Satellite NB10T: Want to install Win 7 but cannot change the UEFI in MSC mode

  Hello

  I know that it isn't the best article at the post office, but there is no instance void for my computer (Satellite NB10T) series and this problem is bound to win 8
  I'm stuck at the moment: I disentailed 8 victory because I want to go back to 7

  I am aware of
  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm
  The problem is that I did not mode Boot under advanced system configuration option; the only thing I can do is enable or disable secure under the Security tab, startup mode which isn't enough

  I also added a supervisor password. It adds a clear keys for secure boot option, but still nothing on the Advanced tab to move to the Csm.
  Clearing keys does not work too.

  I tried to boot multiple linux distro and win7 on usb bootable (theses work on other computers), but no luck. Boot order usb first value of course).
  What can I do?

  Edit: will put some pictures of the uefi

  You posted the screenshots of the configuration of Toshiba utility.
  The boot mode must be changed in the BIOS settings.

  To access the BIOS of the laptop must be turned off.
  Then put the unit BUTTON and press F2 to enter the BIOS.

  In the BIOS, you will find the necessary options: secure boot must be disabled and the UEFI mode must be changed to MSC mode

• JavaScript does not work although Java has been installed correctly and enabled javascript in the menu options. Surprisignly javascript works fine in Internet Explorer.

  I installed FireFox 3.6.9 and after while JavaScript began to malfunction, even if I have the latest Java installed (Java 6 Update 21) and JavaScript enabled in my Options menu. I tried already several times to reinstall Java and Firefox as well, but nothing helps, the Firefox browser still don't know the java installed. I am running Windows Vista. I had the same problem once a long time ago, but don't remember, how I solve it. Otherwise, I was really happy with Firefox and wishes to continue to use it, however, without Javascript runs it's useless.

  To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• Satellite U300-151 plant of the standby or sleep mode extended when WIFI is turned on

  I have a new satellite U300-151. BIOS V3.80 and Intel version 11.5.0.32 wireless (which seems to be the latest driver). Vista SP1

  When return to work of the standby or hibernation mode laptop still crashes if the wireless switch is enabled.

  I am aware that it is an issue being discussed in a number of forums, but apart from references hopeful to SP1 and drivers, that I have not fallen on a solution. SP1 does not appear to have helped to solve my problem.

  All responses - thanks.

  My knowledge of the SP1 could makes some problems because not all drivers are compatible with the new Vista service package.

  The laptop goes down without installing SP1?