encrypted backup MacBook HD unencrypted Time Capsule

Similar Questions

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• How long backups stay them airport time capsule if I make my computers of restoration

  I want to completely wipe my MacBook Pro and set it up as if new to it clear of files that I don't use often, but I want to keep these files on my Time Capsule airport.

  Ive seen a lot of posts about how after a random time ATC (airport Time Capsule) automatically deletes files that are no longer on this computer that you backed up previously.

  QUICK SUMMARY OF THE ISSUE: can I have factory restore my computer and leave my old files to my Time Capsule airport or do I have to connect an external drive to ATC?

  Thank you

  Firefox

  Connect an external hard drive to your computer and put the files it contains. The files you want to keep should be at least two disks; You can fail at any time.

  This can be done when the drive is connected to the time Capsule, but supported formats are more limited, and the process will be slower.

  (13169)

• Restore backup after the reset Time Capsule (1st generation) using Windows PC

  I apologize if this question is somewhere already. I tried to find an answer and I've seen similar discussions but not exactly what I need.

  A bit of history... The location is a small school with about 10 cameras, its network systems, point of sale, cloud networked storage, etc. Was asked by the owner to create or activate a Guest WiFi SSID. They said he worked at the same time, but some work was done by a previous technician and they lost the WiFi of comments.

  So I used the Airport utility to access the time Capsule. However, after the change to the next level (enable the public IP sharing? maybe?), he ended up destroying the entire network, as in nothing was back upward when the utility scanned for devices. Even the Time Capsule was not recognized by the utility. I ended up doing a hard reset on the Time Capsule and do my best to manually configure the device again, even though I was not initially designed the network. I have also discovered that 1st generation Time Capsules have no comments WiFi capabilities.

  To make a long story short (too late... "I know sorry..) .. I got most of the features, functions, etc. on the network back where they were before, with the exception of camera systems and a network storage device active cloud to the owner's House.  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?  I would need to do this using a Windows computer.

  Any help will be greatly appreciated. What I'm trying to avoid the most is having to reset all the cameras, which are upstairs, hard to reach areas. I guess that people who were previously assigned on the cameras must still be there. If only I could get the Capsule of time exactly where it was before he went down, which would allow me to save a lot of time and frustration.

  You can also (2nd choice)... If there is a simple way to detect the active network cameras and other devices on the Time Capsule and pull the IP out of them, that would be helpful as well.

  Thanks in advance for answers!

  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?

  You have my sympathy all...

  Been to this place before today... and I always get myself into it by pure stubbornness... I should just walk on some of these jobs and tell them too hard...!

  What you had to do was to export the configuration before you start playing. Without export of the configuration there is not much hope of healing to less than the previous tech saved a configuration to the unit... This example gets much delicate.

  The TC is actually able to contain several configurations... There is a good chance, however, that wipe you the.

  Anyway... coming to the serious Tin. (same version on Mac and PC utility should work the same).

  Here's my TC who foolishly a reset.

  

  When I do something... first manual configuration, I wonder is to revert to the previous version.

  

  You have done or could you saved the previous settings as a profile... I hope that you did... in the hope...!

  IF so, you have a saved profile.

  In the area of the top menu go in manage profiles.

  

  

  Now, if you are lucky or did the job just last time... by accident... you'll have a saved profile... Just click back.

  

  If nothing is there, or it's current settings... Sorry, but you didn't know something was there... and you cannot was expected to know the trouble you would get yourself in.

  If you have changed a setting in the TC of the bridge in router mode...

  

  (enable the public IP sharing? maybe?)

  Getting back to what it was... mode bridge being the most common.

  At the bridge of the TC does control most things... and you need to return to the main router.

  If the TC kicking upward a stench to return to the bridge, reset it simply still once and then bridge will work... It would be useful to loads to remember what was the setting... just to see the bridge takes the TC of the equation to know where the cameras are.

  If the cameras are on static IP, they will respond to a ping scanner... If the primary router is configured for a standard range of IP addresses... 192.168.1.xxx some.

  Then the TC in bridge must have also taken an ip address in this range and the cameras (Ethernet or wireless)?

  I hope that ethernet, but if they were using the TC as a wireless access point, unless you know exactly the SSID wireless as it was in the past then you do not have this info...

  Look at any computer, they have in the building that was running wireless and watch all the SSID that they use... one of these is likely the TC and you can restore this name.

  Or drop a camera... and ethernet allows to connect to him... and find the ssid, that it's been fixed... redefine the TC on this name (SSID) wireless security... all cameras must be able to connect to it... and you can then restore the entire system by connecting to the IP address that will be displayed in the list on the main router.

  Good luck.. as says Han Solo... you'll need!

• How to perform a manual backup full with airport Time Capsule

  I want to switch to OS X Yosemite.  Before I do that, I want to perform a full manual backup of my system at the airport Time Capsule.  I was not able to find instructions on how to perform a manual backup by using the existing time Capsule.  Thank you.

  Dick C.

  Go to the Time Machine icon in the menu bar and click on NTI Backup Now

• Since the upgrade to El Capitan my automatic backups on my Apple Time capsule do not work

  Everything worked fine until I upgraded to El Capitan... now I don't have enough space for back ups on my time capsule (1 TB is) and a couple of years.

  What can I do simple?

  Thank you

  You have 3 options.  Ranked in order of the most expensive on the down...

  (1) add a new time Capsule and start backups goes to this device. It is also the easiest option.

  (2) add a USB hard drive to the existing time Capsule and start going that animate the backups. Next best option in terms of simplicity

  (3) delete the existing and any time Capsule hard drive start over with new backups. Not too difficult, if you're good by following the instructions

• 2011 13 "MacBook Pro, Apple Time Capsule and HP C6180 printer problem

  
  

  You try to connect the printer to your Time Capsule or via USB to a Mac and share it or via the port on the Time Capsule or via Ethernet USB cable on the Time Capsule?

  I recommend Wired Ethernet to the time Capsule, but if it's too far, wireless is the next best thing.  Here's how to connect wirelessly:

  On the front of the printer: Setup > network > reset default network

  Also on the front of the printer: Setup > network > Wireless Assistant - follow signs

  Finally, each of the Mac, restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Problem to connect a Macbook Air to Time Capsule

  I have a MacBook Air with 10.11.2. The TC I have 695 GB of 998 GB available.

  I tried several times to Run Time Machine on the TC. First it has green light in the airport and on the hardware tool, then a warning sign appears in the tool of the airport.

  No backup copy is made.

  All solutions?

  Anders

  When you open TimeMachinePreferences, have you assigned as the backup drive TC?, if so, delete and assign it again.

• Time capsule backup stopped

  I backup my 3 TB Time Capsule 2 MacBook Pro. Internet is fully accessible in all directions. I was support for 2 years on this unit. Now, one of them runs a little and stops with a message that the "backup failed" and other tracks just more than half, then it stops completely. Any help would be most appreciated. Is my defective Time Capsule after less than 2 years?

  On one of your Macs...

  Hold down the option key while clicking on the icon of "the clock" Time machine at the top of the screen

  Click on verify backups

  The process will take 10 to 60 minutes or more depending on the amount of data is stored in the back upward. You can do other things while the verification process is running, or just look at the amount of progress if you're bored and have nothing else to do.

  Note the results once the process is complete.

  Then, run the same control over the other Mac.

  Report on results for Mac.

• Extraction of files from a time capsule that contains data of 3 different MacBooks. If I added a new macbook but I wanted only to select files. How can I find these files?

  If I have 3 different MacBooks stored on time capsule but I want only to add the files selected to a new macbook how I do it,

  find and retrieve files from these devices? How to retrieve the complete set of files for an individual device?

  If I wanted to get back anything, what is the process for this?

  Thank you

  Bill

  The correct method is to migrate. Use the migration assistant in the Utilities folder.

  However migrate doesn't have the fine selection you're after, if you do not want the entire folder like documents.

  You could find to manual aperture and copy the sparsebundle to Time Machine works ok... Use just traverse other disks of the main options of TM TM it in the dock.

  

  It might not allow you to recover files but I found that I could copy them into TM and then paste the files by jumping out to finder.

  Or you can migrate to another place is to say USB drive plugged into the computer and then retrieve files in a simple copy and paste... Although permissions can be a pain, and you must correct them before you can copy stuff to your own computer files.

• Move backup by USB-drive to Time Capsule

  I used to make with Time Machine backups on an external USB drive. Now, I would like to move these old backups to my new Time Capsule.

  Is this possible? And how do I do it?

  Thank you

  Click here and follow the instructions.

  (143017)

• Backup to Time Capsule and an external hard drive

  Hi all

  For several years, I use as a router Time Capsule and a backup device. Recently I found information about to associate an additional external hard drive for backup. For me it's a backup just to be sure when my Time Capsule would fail.

  I found information on the internet that it was easy to switch between the two devices. I connected the external hard drive in the time Capsule.

  But after installing the external hard drive my Time Capsule is not able to back up more!

  Please, could you help me find a solution. It would be great for me.

  Many thanks in advance,

  Diana

  I suggest that you get first back ups goes again on the Time Capsule, then we can discuss adding the USB key as a second backup source.

  For now, if please power off the power and unplug the USB of the time Capsule.

  (Gear on the dock icon)... open Mac system preferences, then open Time Machine

  Make sure that Time Machine is running

  Click Add or remove disks

  Under the backup drives, make sure that the Time Capsule disk (named 'Data', unless you have changed the name) appears

  If it isn't, then click data under available disks

  Then, click on disk use

  Close the window and now, click the 'clock' Time machine at the top of the screen

  Click on NTI Backup Now and who should get backups start on the Time Capsule

  After the return when you have confirmed that this is the case

• How to free up disk space on the airport time capsule?

  I want to add a new macbook to my time capsule 2 TB airport but I get the error message "needs space". Is there a way to free up space without erasing the whole time capsule?

  Only by deleting the files in the backup itself. If you use Time Machine, then you'd that uses the Time Machine application. It would be much easier to erase the drive in the time Capsule.

• Change of name affects NetBios of Mac Time Capsule?

  Hi all

  I noticed that my netbios name is the one I always used with '-2' after him, I don't know why and can't remember if I chose that, but I basically changed it back to what it was without the extra part. However I've done backups to my Apple Time Capsule with the "nom_netbios-2". Now that I've renamed "nom_netbios", is that going to affect my Time Capsule? Sorry for the question but I'm quite new with Time Capsule. Thank you!

  Check if you have backups for two Macs with similar names, rather than backups for a Mac as follows:

  Open any window in the Finder on your Mac

  Look for Time Capsule icon under the title shared on the left side of the window

  Click the Time Capsule and a folder called 'Data' (unless you have changed the name of the Time Capsule disk) appears in the box on the right

  Double click on data to open the player. You may be asked the peripheral or the administrator Time Capsule password if you have not done this before

  Now look to see if there is a file "sparsebundle" for your Mac, or there are two

  Ideally, you do not want to only see one file with the normal name of your Mac

  Report on the results

• Airport Time Capsule HD access

  I have an AC of 802.11 airport Time Capsule 3 to, PartNumber: ME182LL/A, and I want to save my MacBook Air by Time Capsule app.

  In addition, I use it as an external hard drive, moving some files to the airport Time Capsule using the Finder.

  I use physical conection from my MacBook to the trough of Time Capsule a RJ45-USB converter.

  But I am extremelly experiencing a lot of time to access my files using the Finder.

  Do you have an idea how I can fix this connection?

  Do you have an idea how I can fix this connection?

  I guess that your Mac has a Thunderbolt port.

  Use a Thunderbolt for the Ethernet card.  It's up to 10 times faster than the USB adapter. Your actual speed will be 4 to 5 times faster than USB.

  Maid in Gigabit Ethernet Adapter - Apple