End of the characters on the line in the SQL worksheet

Similar Questions

• Formatting characters in the SQL worksheet in the version 2.1.1.64

  Hello
  
  Using the version 2.1.1.64
  
  When I type SQL in the SQL worksheet calculation is to show formatting characters - for example all the spaces display as a light gray and a newline character appears at the end of each line.
  
  Formatting characters displayed not initially when I started to use this version. I don't know how this setting is enabled, but there doesn't seem to be a preferences setting to turn it off. Any ideas?

  Tools-> preferences-> Code Editor-> display-> Show characters

  should take care of your problem.

• How to get line numbers to display on the SQL worksheet?

  Dear Forum,

  I learn the SQL Developer.  I use it in my work and school.  At school, when I enter a query in the SQL worksheet, line numbers show in a column to the left of the editing area.  In my work, no line number.  I'm working on a fairly long query at my work, and the line numbers would be useful.

  I looked at tools / preferences / settings for the Code Editor, but do not find a setting for line numbers.  I looked at the other tabs in preferences and found nothing that looked useful.

  I have looked at all of the choices on the display list, but can't find anything on line numbers.

  Am I missing something obvious?  Line numbers is also available?  If so, how?

  I looked at various hits "line number" in this forum, but I've not found anything exactly the point.

  Beverly

  PS Oracle 11g, SQL Developer 3.0.04, Linux x 86-64 (don't have version)

  Tools-> preferences /-> Code Editor-> line gutter

• How to perform the procedure in the SQL worksheet?

  Hi, anyone knows, how I can execute procedure here?
  
  I try to EXEC sec_roles, EXEC security_admin.sec_roles, EXECUTE - there's a SQL statement error. When I use the CALL - there is no such procedure (I have execute privileges).
  
  Although in SQLPlus EXEC works, but there are problems with the standard SQL commands (each of them '2' returns any content is).
  
  Any ideas?
  
  Concerning
  Krzysztof

  EXEC procedure (parameters) is a plu sql (and some others) shortcut for

  BEGIN
     procedure(parameters);
  END;
  

  So try that and then pressing / on anything in the sql worksheet that makes a statement in execution.

  Note that if your procedure has defined parameters as OUT or IN OUT, you need to provide a variable to accept the returned values.

  John

• How can I turn off automatic formatting while working in the SQL worksheet?

  Friends,
  
  Hope you can help with a quick question.
  
  Is it possible to stop the automatic formatting of SQL statements in the SQL worksheet?
  
  for example, when I type select * double it auto SELECT formats becomes * FROM DUAL when I press return.
  
  I use SQL Developer 2.1.1.64
  
  Thanks in advance

  Preferences - editor of Code - completion Insight - uncheck change case when typing

  Have fun
  K.

• SQL Dev 1.5.3: No "feedback" in the SQL worksheet? for example "1,000 rows deleted.

  In SQL Developer 1.5.3 seems no "feedback" in the SQL worksheet when you insert, update, and delete records. So I like the timer, it is more important for users to get comments for the UPDATE and DELETE statements; for example, it is essential to know if 0, 1 or 1,000 files have been updated by a particular SQL statement - also for DELETE queries (for example when users forget the WHERE clause, feedback is an important mechanism to realize the error).
  
  Is it possible to turn on your comments? ("set feedback we" seems not be honored). What is this fixed point 1.5.4? Should be presented as a feature request?
  
  Thank you.
  
  Dana
  
  Published by: Dana N on May 18, 2009 05:06

  Blame poor analytical skills or whatever, but they managed to have 2 reports areas separated from each other.
  You've found one of the toolbar in the spreadsheet with the timings of course, but there is also one in the status bar of heads...

  Have fun
  K.

• Impossible to delete characters on the SQL worksheet

  I am facing a noisy problem with SQL Developer (Versioning Support 1.5.5.59.69)...
  Whenever I open a SQL worksheet, I can insert characters but I can't remove them...
  
  What happened!

  Hello
  There is too much of a week, I had problem with strikes in the worksheets. For me has been useful tools-> preferences-> accelerators-> load Preset...
  This returned value hit in the normal state.
  Petr

• Works Datapump inside the SQL worksheet...

  Hi all

  "running the following code inside the spreadsheet and he just spits ' anonymous block completed.

  *****************************

  Set scan off

  Set serveroutput on

  escape game off

  whenever sqlerror exit

  DECLARE

  number of H1;

  errorvarchar varchar2 (100): = "ERROR";

  tryGetStatus number: = 0;

  Start

  H1: = dbms_datapump.open (operation = > 'IMPORT', job_mode = > job_name 'FULL' = > 'IMPORT_JOB_SQLDEV_73', version = > 'COMPATIBLE');

  tryGetStatus: = 1;

  dbms_datapump.set_parallel (handle = > h1, degree = > 1);

  dbms_datapump.add_file (handle = > h1, filename = > 'IMPORTtest2.LOG', directory = > 'DATA_PUMP_DIR', filetype = > 3);

  dbms_datapump.set_parameter (handle = > h1, name = > 'KEEP_MASTER', value = > 0);

  dbms_datapump.add_file (handle = > h1, filename = > ' ORAEU_COPIED.) (DMP", directory = >"DATA_PUMP_DIR", filetype = > 1);

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\APT_SYS_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/APT_SYS_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\APT_SYS_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/APT_SYS_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\DATA_MART_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATA_MART_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\DATA_MART_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATA_MART_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > UPPER ('C:\ORACLE\ORADATA\ORCL/DATA_STORE_DATA01.) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATA_STORE_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\DATA_STORE_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATA_STORE_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\RNET2_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/RNET2_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\RNET2_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/RNET2_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\DATA_AMA_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATA_AMA_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\DATA_AMA_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATA_AMA_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\DATASERVICES_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATASERVICES_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\DATASERVICES_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/DATASERVICES_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\ARC_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/ARC_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\MCSS_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/MCSS_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\MCSS_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/MCSS_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\IPAS_DATA01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/IPAS_DATA01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\IPAS_IDX01.)) DBF'), value = > SUPERIOR ('/ rdsdbdata/db/ORAEU_A/file/IPAS_IDX01.) DBF'));

  dbms_datapump.metadata_remap (manage = > h1, name = > 'REMAP_DATAFILE', old_value = > SUPERIOR ('C:\ORACLE\ORADATA\ORCL\PFIZERCMS_DATA01.)) DBF "), value = >"

  dbms_datapump.set_parameter (handle = > h1, name = > 'INCLUDE_METADATA', value = > 1);

  dbms_datapump.set_parameter (handle = > h1, name = > 'DATA_ACCESS_METHOD', value = > "AUTOMATIC").

  dbms_datapump.set_parameter (handle = > h1, name = > 'REUSE_DATAFILES', value = > 0);

  dbms_datapump.set_parameter (handle = > h1, name = > 'TABLE_EXISTS_ACTION', value = > 'REPLACE');

  dbms_datapump.set_parameter (handle = > h1, name = > 'SKIP_UNUSABLE_INDEXES', value = > 0);

  dbms_datapump. START_JOB (handle = > h1, skip_current = > 0, abort_step = > 0);

  dbms_datapump. Detach (handle = > h1);

  errorvarchar: = "NO_ERROR"

  EXCEPTION

  WHILE OTHERS THEN

  BEGIN

  IF ((errorvarchar = ' ERROR') AND (tryGetStatus = 1)) THEN

  DBMS_DATAPUMP. Detach (H1);

  END IF;

  EXCEPTION

  WHILE OTHERS THEN

  NULL;

  END;

  LIFT;

  END;

  /

  *****************

  all entries are appreciated

  Thank you

  Please let me know if you see a code problem

  What is your question has to do with Sql Developer?

  Unless you can connect you must mark ANSWERED thread and repost it in Sql and Pl/Sql forum

  the Japan Government says:

  Hi Jeff

  I expect that it runs the import at least.

  Get this error now on line 66:

  EXCEPTION

  WHILE OTHERS THEN

  BEGIN

  IF ((errorvarchar = ' ERROR') AND (tryGetStatus = 1)) THEN

  DBMS_DATAPUMP. Detach (H1);

  END IF;

  EXCEPTION---> line 66

  WHILE OTHERS THEN

  NULL;

  END;

  When you repost you should post the EXACT code you use. The code you posted is NOT valid: you must also REMOVE the WHEN of OTHER or you can expect everyone to book you to INTENTIONALLY HIDE any exceptions that occur. Why do you NOT want to know if Oracle finds problems in your code? That makes NO sense at all.

  IF ((errorvarchar = ' ERROR') AND (tryGetStatus = 1)) THEN

  There is NO SPACE after the "and" what is garbage just as far as Oracle are concerned.

  Either you have posted an incorrect code or your code has syntax errors and will not compile or run anyway.

  I suggest that correct you your syntax errors before reposting in the Sql forum. If you have pain to find their delete ALL unnecessary code to reduce the problem to the example as SIMPLE as possible, until you find the code causing errors.

• Preserve Bind values in the SQL worksheet

  Hello

  When you run the SQL statements with var/binding settings, SQLD can persist values entered the tool reboots?

  Is there a preference that controls this?

  Java (TM) Platform	1.7.0_71
  Oracle IDE	4.0.3.16.84
  Support for versioning	4.0.3.16.84

  Thank you

  Manish

  Never mind. Found, he looked at me, but I was blind.

  Under the worksheet, check 'Save the Bind Variables on the disc to the output'.

• How can I leave echo in the sql worksheet developer sql?

  When I generate out of the script from a sql file that is loaded into the spreadsheet sqldeveloper, the statement appears in the output pane before the results of the query. This can occur because there are substitution (for example & site) variables in the query. However, I would really for Nothing of the sql statement displayed in the results - I want to save it as an output file. Is there a way to do this? 'left echo' is not recognized as a valid command.
  
  I know that I can export data in the results pane of query to a text as well as a csv file, etc., but I don't like how it looks - I want the data as described in the output of the script.
  
  Here is a portion of the script... just enough to show "set echo off" and use of the user variable.
  
  Thank you
  Carol
  

  set echo off
  select s.site_id SID,substr(s.site_name,1, 50) SITE, month.start_date_time, 
  sum(decode(sd.datatype_id,111,month.value,null)) EC,
  sum(decode(sd.datatype_id,1217,month.value,null)) PPM,
  round(sum(decode(sd.datatype_id,19,month.value,decode(sd.datatype_id,93,month.value,null))),2) CFS,
  round(sum(decode(sd.datatype_id,1216,month.value,decode(sd.datatype_id,1218,month.value,null))),0)  TOTAL_CFS,
  round(sum(decode(sd.datatype_id,20,month.value,decode(sd.datatype_id,1113,month.value,null))),0)  AF
  from hdb_site s, hdb_site_datatype sd, r_month month, ref_yao_sal_flow_site_map map
  where map.flow_site_id = &&site

  set verify off
  

  can hide variable replacements in sqlplus and sql developer

• What is the gray hilight in the SQL worksheet?

  I write several SQL statements on the worksheet, hilight the part that I want to run and either run it by pressing F5 F9 ot.
  
  After the execution, SQL Developer hilight text in grey. What are the criteria to hilight something gray? So far, I see no logic, sometimes, the gray hilight disappears, sometimes he hilight half of a SQL statement, sometimes the hilight is placed on a section of code that has nothing to do with the actual section running.
  
  I struggle to understand the idea behind this grey hilight and I would turn it off. Can you please show me how to do this?
  
  Thanks in advance.

  It's item highlight "current SQL" and must cover the statement you just of execution (with f9). With f5, it moves in the script as the execution point moves.

  Still missing the last line, but I've never seen covering a random part of a statement.

  I don't think you can get rid of it altogether, but you can do more transparent by setting its white background (or whatever your worksheet background and transparent foreground.

  Go to tools | Preferences | Code editor | Syntax for colors and select current Sql in the available Styles, framed and experiment with colors.

• doubt on the sql worksheet

  Hi people,

  I had a sql query. How can I find the cost of a query and the time taken.

  Thank you

  It's hard to say. Dependss running SQL on several factors such as the index, workload, and many others.

  You can run the query with "Explain plan" (F10) but the cost that you see in the last column of the table does not tell you the total cost of the query. There is a long, long discussion on that to asktom.oracle.com , who give a lot of inside this issue.

  Timo

• How to set serveroutput on the sql worksheet?

  Hi all
  I had

  ORA-00922: missing or invalid option 

  When I run

  SET SERVEROUTPUT ON

  Why is this? I want to empty the buffer when executing the DBMS_OUTPUT. PUT_LINE.
  
  Best regards
  Val

  Valerie,

  As I see worksheet SQL does not support the SQLPLus commands. I have some doubts that supports packages of PL/SQL calls. You can try calling "DBMS_OUTPUT. ACTIVATE (BUFFER_SIZE-online NULL)"instead of SET SERVEROUTPUT ON" but it gave me error when I tried to run any command PLSQL.

  Best regards

  Gokhan Atil
  ------------------------------------

  If you answer this question, please mark appropriate as correct/useful messages and the thread as closed. Thank you

• SQLdeveloper export to Excel - how to hide the SQL worksheet for data export

  Export to Excel - how to hide SQL worksheet for data export?

  Hello

  SQL Developer forum is here: SQL Developer

  Frank

• Version 2 (9.2) - the maximum number of characters allowed per line is 32767 really?

  Hi all,
  
  The maximum number of characters allowed per line is 32767 really?
  
  The [Oracle documentation | http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96612/u_file2.htm#1002215] specify that the maximum size of a row of utl_file is 32767octets, but only accepts the 32766.
  
  If I try to include a line with 32767octets, the following error occurs:
  + "ORA-29285: error writing the file." + "
  
  Philips

  What new line character at the end.?

  max_linesize - the maximum number of characters per line, including the newline character, for this file. Minimum 1, maximum is 32767