Cannot update iphone, windows installer does not properly
When installing update from apple, I get a message that the installation package contains no file. I have all the updates. Any suggestions?
Hello downloadRA,
You duplicate this issue even if you try to connect to a different USB port? You're updated with all Windows updates?
Please let us know.
Tags: Windows
Similar Questions
-
I can't get my updates. the Windows Installer does not work how to fix it
I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?
http://support.Microsoft.com/kb/2438651#reso1
See the above article, I suggest you use not Fixit, but it's your choice.
For manually fixit it you follow the steps in the resolution.
fyip
-
Impossible to uninstall the windows installer does not properly
I can't uninstall a program because I get the message Windows Installer does not work correctly... contact support
Have you tried to install the latest version of Windows Installer?
Otherwise, try to run the following from start-> Run:msiexec /unregserverThen,msiexec/regserver
-
Windows Installer does not properly error Code: 641
HAVE WINDOWS VISTA HOME PREMIUM WINDOWS SETUP DOES NOT CORRECTLY GIVES 641 ERROR WHEN AUTO UPDATE TRIES TO INSTALL IMPORTANT UPDATES. DON'T ME LETS NOT UNINSTALL A PROGRAM SAYS CAN'T ACCESS THE WINDOWS INSTALL.
You have installed system mechanic? This is what it seems possible that a recent analysis could have messed up windows installer, so causing problems similar to what you describe.
I followed the instructions in this thread:http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Installer-and-error-codes-641-80070641/24fd9f52-7faa-4f80-8f8e-8c7cd80dd481
Easy to follow, even for an old man like me. -
Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.
Hi my NameJoel,
See the methods mentioned below and check if that helps.Method 1:How to troubleshoot an installation fails on Windows XP Service Pack 3Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.See also:You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
http://support.Microsoft.com/kb/943144Steps to take before you install Windows XP Service Pack 3Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.Important: Make sure that you enable the antivirus software after you install Windows XP SP3.Hope this information helps. -
Windows Installer does not work with Vista Home Premium 32-bit system.
My computer did not an automatic update in over 6 months. I discovered this when I could not install my tax preparation software. the error message is gone "windows installer does not work, a file may be damaged, contact support windows technique.»
SFC
Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type
sfc/scannow
For the results of the SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Typefindstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "
The system update tool
Ensures the consistency of the folder WinSxS (Side by Side).
http://Windows.Microsoft.com/en-AU/Windows7/what-is-the-system-update-readiness-tool
For 32-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=504
For 64-bit Windows
http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540
To see the results click on Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).
Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log
Reregister Windows install
Desktop shortcuts are shortcuts to the Windows Installer which then starts the Office program.
Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type
regsvr32 c:\Windows\System32\msi.dll
regsvr32 c:\Windows\System32\msihnd.dll
regsvr32 c:\Windows\System32\msimtf.dll
regsvr32 c:\Windows\System32\msisip.dll
c:\Windows\System32\Msiexec.exe/regThat you re-register Windows Installer.
-
Can't install or uninstall I get this msg. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. HELP please.
Hello Monica and DuaneWolfe,.
Thanks for posting in the Microsoft Community. I understand that the Windows Installer does not work on the computer windows vista. I also noticed that there is another thread of yours, with the same question, and the thread was answered by Yaqub K August 30, 2012.Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
I suggest you to consult the help article mentioned in this thread and let us know the status of the issue.
Please avoid creating threads in duplicate on the same issue. You can reply to this thread if you need help and I'll be more than happy to help you. -
Cannot connect because windows 7 does not recognizse my profile
Original title: Mr. Wall
Cannot connect because windows 7 does not recognizse my profile
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Safe Mode ADMINISTRATOR account has no password by default (unless someone has changed the password so it should be available).
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been known to cause this problem.
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after following the above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or two with the same password) to use a test or fix the other.
You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (remember to always leave an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Satellite A300-1EH - windows installer does not work correctly
Hello, this is my first post on this forum!
My windows installer does not work correctly.
What should do?Soryy, but I did not now much on computer systems.
I have reinstall this installer?I'm waiting for your answers.
> My windows installer does not work correctly.
What do you mean exactly? You see a mistake? What exactly happens?
Maybe your CD is scratched or damaged. -
My Windows Installer does not work and I want to reinstall Windows. How can I do this?
original title: Windows installMy windows installer does not work. How can I reinstall my operating system?
You will need to change the startup disk in the BIOS for the cd. Then boot from it. If you are installing windows from windows
-
Original title: itunes won't uninstall on my XP Professional version 2002.
iTunes won't uninstall on my XP Professional version 2002. I tried to delete all files from apple and it will let me delete the Apple software update. I get an error MOUSSOKI that says that Windows Setup does not work. What should I do?
Hello
Run the tool fixit in the following article and check:
-
Windows Installer does not not with vista basic error code #641
WINDOWS INSTALL DOES NOT WORK ON VISTA BASIC. I HAVE RCD CODE ERROR #641 PLEASE HELP
Hi yorkieczar,
Please take a look at the following information thanks to a post above by PA bear MS MVP:
There is no doubt in my mind that System Mechanic caused this!
And you have plenty of company, too. See these recent discussions-online
~~~~~~~~~~~~~~~~~~~~~~~~
OPTION A: If you have backups of ALL System Mechanic has EVER done on your computer changes, restore ALL the & restart and test - and then uninstall System Mechanic & some other registry cleaners. [1]
OPTION B: methods to execute the RESOLUTIONS 1, 2 and 3 in http://support.microsoft.com/kb/2642495 then reboot & test.
OPTION C: Contact System Mechanic (iolo.com) support, assuming you have purchased System Mechanic Professional.
===========================================================
[1] TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspxOriginal thread:
I hope this helps!
-
Windows Installer does not work... Windows 7 Home Premium 64-bit
Hello!
I am unable to get the windows installer to run. I get the message:
"The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »
The Windows Installer program can be repaired or replaced? I couldn't find a download version for my operating system.
Any suggestions would be greatly appreciated. Thank you!
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
Get a message that Windows Installer does not work correctly.
Original title: Windows Installer problem
I get a message that my Windows Installer is not workiing correctly. What should I do?
Thanks to all who tried to help. I finally finished on the pone to a tech assistant who could still find a solution. End of the story: crossed the system recovery and I am now busy do everything to come back as much as I can. Thanks again for your efforts.
-
Windows Installer does not work, and niether do the Windows updates.
OK, so I recently installed Advanced System Care for a purchase price of 12.28. After the installation he did in fact speed up my computer but now I cannot make the updates for windows update and I access windows install. I went through the solutions on "windows setup will not work", and nothing works. Help, please.
Alissa.
Hey alissa,.
Disable Advanced System Care and see if the update works. If this works, contact the software provider for help on how to make it work with updates.
Note: run the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem. Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Pilot LabVIEW 2010 FPGA Xilinx SPARTAN 3 Board starting
Dear friends, Is it possible to publish a LabVIEW FPGA Xilinx SPARTAN Driver 2010 3rd starting Board? Kind regards WEDO
-
Product key Vista - where can I find it?
I bought an upgrade to windows 7, but I need my vista product key to go forward. I have a HP with Vista Business installed. When I bought the PC, I have not received any vista disks. I had a sticker on the bottom that had the key on, but as it is n
-
Could not open error file: access denied
Original title: My laptop had some problems making Vista kind of accident. after it has been resolved by installing Windows 7 my folders cannot be opened more because whenever I try to open them, I get the message with the location of the folder and
-
Unable to print through 'Adobe PDF' from a 'Secure' PDF
Hi guys,.First, let's define the password for the PDF file with the setting below:Then, the documents will go to the junior to proceed, when they try to print documents through Adobe PDF for some pages, impossible to do with the error below:Possible
-
Guard saying food purchases and when I do it says that it cannot check.