End of the entrance has been reached

Similar Questions

• The end of the data has been reached while, since the reading of a container

  I get on "the end of the data has been reached then that since reading of a container" error message when I try to use the filter > distortion of the camera function on 11 items. How can I erase this?

  See if any of the suggestions here to help you:

  Error reading Photoshop CS3 filters

• End of the stream has been reached error CS4

  After that then transcoding the main video file during construction, still prepares "Audio planning for the film" in which case the error 'end of the stream has been reached' pop-up window appears and the burn fails later. There is no errors within the project and I burned the project successfully on a DVD with no errors in the past. The only changes is this time a re encoding of the video file (uncompressed AVI 1920 x 1280 bit depth max), a change in the video vignettes for the chapter selection pages and a tweeking of the chapter points. Because the video file is so large, I delete the previous AVI file and export using the same name to create the links of approriate. I read that audio compression is the main cause of this error, however, I did nothing related sound between versions of the DVD. How can I fix this error?  Thanks in advance.

  It is possible that your Audio stream is longer than the video stream. This can cause problems, even if it's only longer by a unit Audio, or both.

  I always begin (problem with locking DD 5.1 SS) my video with silence and always end my Audio, about 1-2 seconds, before the end of the video stream.

  Can you tell us all about your Audio and video streams, and how you in yet?

  While he's a suspect, probably, it would not be the only suspect. More information will be useful in ruling out, or focusing on the best way to fix things.

  Good luck

  Hunt

• End of stream has been reached

  Hello

  I spent a few days doing a DVD project with 6 menus, 3 tenors and a slideshow in Adobe CS6 Encore on my MacBook Pro. However, when I try to compile a DVD + R RW 4. GB 7 1-16 x speed, I get the error: «End of stream has been reached» I tried a lot of things that I found on this forum, but nothing helped.

  Can someone help me with this please?

  Kind regards

  Wannes

  Two threads with very different solutions. See if one works for you:

  Still DVD Error Message - «the end of the stream has been reached»

  end of the stream has reached (error 19901): Adobe Encore DVD

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• IIS 7.5, the NETBIOS command limit has been reached

  We use IIS services and media to stream videos. It comes to our dedicated streaming server. On rush hour, an error showed by saying 'the NETBIOS command limit has been reached.

  More info on platform:
  

  • IIS version is 7.5
  • OS version is Windows Server 2008

  Any info on this would be helpful extreme.

  Thank you

  
  

  Hi, Pranab,

  Error message "the NETBIOS command limit has been reached" in Windows Server 2003, Windows XP, and in Windows 2000 Server

  http://support.Microsoft.com/kb/810886

  NETBIOS command limit has been reached

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/fa2aa6f2-9f3e-4dd0-B203-60f910767574

  If you need more information, repost your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I m error when i m to access the Manager version alb 3. "expired.the timeout period elapsed prior to obtaining a connection from the pool.this have bcz grouped all connection used and maximum pool size has been reached.

  Hi team,

  I m error when i m to access the Manager version alb 3. "expired.the timeout period elapsed prior to obtaining a connection from the pool.this have bcz grouped all connection used and maximum pool size has been reached.

  Please provide the solution.

  Concerning

  Ajay

  Discussion moved from the Knowledge Base of VMware Lab Manager

• c000021a error fatal system ended unexpectedly with a status of 0 = oxc0000135 (0x00000000 0x00000000) the system has been shut down.

  This error is repairable? When I turn on my computer market, I always blue screen and error message. I do not see that my mouse shows thanks

  Mary

  Most of the errors are correctable. It's just that the BSOD errors are usually harder to fix than many others. Two reasons for this. One is that the system is usually more difficult with the result that the investigative process is hindered access. The other is that the initial error report indicates only the general nature of the problem and not the specific cause. If the system has been activated to provide a more detailed memory dump reports they can be analyzed. The problem for most users is that they do not have the computer skills to take on the task.

  Move to the specific problem you have. The document in the link below gives tips on the clues or pointers for the bug check code: 0xc000021a

  http://msdn.Microsoft.com/en-us/library/ff560177 (v = VS. 85) .aspx

  Please answer a few questions.

  1 how long have you had the problem?

  2 do you have added or removed any hardware or software during the period, shortly before the problem occurred. If Yes please provide details.

  3. are you able to access the computer in safe mode without the error occurring? My second link provides details on how to access safe mode if you have not done this before.

  4. your computer is a desktop or a laptop?

  5. What is your computer brand and model?

  6. what you precisely through a Windows XP CD? Not all computer manufacturers provide a CD. Your answer to question 5 could lead me to discover an alternative so you worry if you do not have a CD.

  The link following gives information on the Menu Options, Advanced Windows, you can try the last known good Configuration suggested in the first link I have provided.

  http://support.Microsoft.com/kb/315222

  Hope this helps, Gerry Cornell

• Printer lost access to internet when the router has been changed

  My HP Photosmart Plus is connected wireless to my macbook air and has worked well for years.  Our company has a wired connection, enter into a linksys/cisco router and it gives access wireless via an SSID on my mac and your printer.

  A few months ago, the router has been changed and they did something for cable and wireless.  Im guessing they're on separate subnets or something because it is another problem is that I can no longer view the others on the network who are wired, even if I could before.

  In any case, ever since this time, I noticed that some smartphones and tablets had no internet connectivity.  They were connected to the wireless network that gave my internet connection perfect Mac, their signal is just as strong, but they had no internet connectivity.  So I figured that the DNS' have not been read right by these smartphones and tablets, I manually added the DNS' using my mac and now these phones and tablets work very well.

  I guess it's the same problem with my printer now because the only thing that doesn't work is eprint and web services.  I get a message saying that the printer could not reach the server, try again.  Ive restarted the printer and it doesn't matter.  I can see it has a properly assigned IP and I can print wireless for it, but there is no internet access.

  How 'to add' those DNS IPs to the printer?

  Hello quique123,

  Welcome to the Forums of HP's Support.  I understand you get a connection error message when you try to activate your printer Photosmart Plus web services.

  I've included a link to another post with measures, including screenshots, on how to set manual of the printer an IP address manually and DNS servers. As you go through the post, you will notice that it is recommended to use the Google public DNS servers when you set manual DNS servers.  Please do not worry that the screenshots are for a Photosmart 7510, the steps are the same for your Photosmart Plus printer.

• Satellite L40 - 18Z: warnings of Tempo that 75% of the memory has been used

  My dad recently bought a satellite L40 - 18z.

  Tempo began to give warnings that 75% of the memory has been used.
  When I checked there a 74 GB HDD with 3 partitions top - 1.46 GB (which I assume is the recovery partition), GB 37.26 labeled 'Vista', containing the OS and all the rest, and finally Go 35.80 labeled 'Data' which is empty.

  The partition 'Data' is necessary?

  Or do I have to move all of the documents on this partition, and if so why not been put there by default?

  My father is not very computer and I find it strange that the hard drive is not that way. It could very easily write the Vista partition and thought it was! And ended up paying someone to put a bigger HDD in or sorting.

  It seems to be no mention of partition 'Data' in the documentation or advice on how to use it.

  > Is the partition 'Data' necessary?
  Well, you can use this partition for data storage.
  I mean you don t need to store files such as mp3, jpg, etc. on the system partition, but on this partition.

• You cannot ship until the document has been transferred to the invoice - gp10

  Hi all

  When our accounting runs through the end of the day, they receive this error:

  You cannot ship until the document has been transferred to the invoice

  I tried Google and found nothing unfortunately. Just click ok and end of day works fine for the rest, but the next day same error. Any ideas?

  You can get support for GP here.

• Is it possible to recover a database with the copy of data files (cp), while the database has been opened?

  Hello

  We know we need to do a backup of an oracle database by using the appropriate tool, in most cases the rman. But we have in our society, a person who helps us with the backup of all the databases oracle we have. Thus, in addition to the rman backups, we do a copy (cp) with the open database of all files in oracle database, (without start backup) including of course spfile, controlfile, etc.. My question is: can recover us my database using this copied data files? or are we just wasting disk space on our backup environment?

  Kind regards
  Melo.

  We're doing a copy (cp) with the open database of all files in oracle database, (without start backup) including of course spfile, controlfile, etc..

  As EdStevens said, it's essentially a backup without value. When you copy files from a backup ' hot', there may be inconsistencies in the blocks of the file as transactions actively edit these blocks while the copy is made. Mechanism of Oracle backups hot managed by users is to put the database or tablespace in backup mode, copy the files, and then the end backup mode. Without this mechanism, the chances of being able to restore from this backup are very, very thin.

  My question is: can recover us my database using this copied data files?

  My question is... have you tested recovery? If the recovery has been piloted, then called the answer to this question. Please read the end of this blog post for more information:

  Blog of Peasland before necessary recovery database backups"

  See you soon,.
  Brian

• network quota for this organization vDC has been reached

  Cannot start VAPP "db-template.
  -Unable to start virtual machines in the pool of resources "(7cf9a7e5-1784-42bc-9182-9167c5be5ba3), SMX-org-vDC.
  -Impossible to deploy the "VM" network because the network for this organization vDC quota has been reached.

  I assigned a pool of 30 IP addresses while creating the external network. But, the quota reached so quickly after having allocated 2 IP addresses.

  When I check pool network he had exhausted after having allocated 2 IP.

  I'd appreciate any help.

  Whenever you create a network, whether it's a network (NAT) org or VAPP vCloud network administrator will have a network of the pool, then you must decide how many networks, you want to be able to create by org.

  Because it can become intensive admin to create numerous exchanges, you can run several layer 2 networks on a virtual LAN using vCDNI, so if you want to create many networks, this can be a better choice for you. There is a section on configuring this in the vCloud Administrator's guide. Be aware that you need to increase the MTU to 1524.

  Hope this helps Charlie

• (3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  The following error message appears in my events of vCenter server every minute or so:

  "(3) maximum number of hosts allowed for this edition of vCenter Server has been reached.

  I have a license of vCenter Server Foundation (4.0) with three hosts. I am aware that this license only supports three hosts. Why vCenter should log an error every minute to tell me that? Can I have it also ignored it clutter visually the events list?

  And to meet me once again, VMware has just contacted me and he was recorded as a bug and will be fixed in update 1 when coming out.