The end of the data has been reached while, since the reading of a container

Similar Questions

• End of the stream has been reached error CS4

  After that then transcoding the main video file during construction, still prepares "Audio planning for the film" in which case the error 'end of the stream has been reached' pop-up window appears and the burn fails later. There is no errors within the project and I burned the project successfully on a DVD with no errors in the past. The only changes is this time a re encoding of the video file (uncompressed AVI 1920 x 1280 bit depth max), a change in the video vignettes for the chapter selection pages and a tweeking of the chapter points. Because the video file is so large, I delete the previous AVI file and export using the same name to create the links of approriate. I read that audio compression is the main cause of this error, however, I did nothing related sound between versions of the DVD. How can I fix this error?  Thanks in advance.

  It is possible that your Audio stream is longer than the video stream. This can cause problems, even if it's only longer by a unit Audio, or both.

  I always begin (problem with locking DD 5.1 SS) my video with silence and always end my Audio, about 1-2 seconds, before the end of the video stream.

  Can you tell us all about your Audio and video streams, and how you in yet?

  While he's a suspect, probably, it would not be the only suspect. More information will be useful in ruling out, or focusing on the best way to fix things.

  Good luck

  Hunt

• End of the entrance has been reached

  Hi-
  
  I have a massive query in my answer generates error message:
  
  Error details
  Error codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
  ODBC driver returned an error (SQLExecDirectW).
  State: HY000. Code: 295120032. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 27001] End of entry has been reached. The illegal syntax. (HY000)
  
  It's because I have so many syntax in each column. Is there someone has experienced this before, is there any setting should be set to avoid this error?
  
  Thank you
  
  Will be

  Hi Will,

  Yes, the vast generated SQL is to hit a limit for OBIEE and is causing your problem. The FILTER function you used actually hits you twice, once in the neighborhood CHIC of the query and a second time in the area WHERE the query, so if you need to repeat this long formula, you'll quickly develop your query. In general, I would recommend to anyone to avoid this function when it is still possible.

  Although I don't know that your logic is correct, it has to be a better way to calculate your position. A database view or materialized or using ETL view could help relieve some of the intense formulas.

  Good luck with it and I hope it works for you! As always, please award points to those who feel you has helped to resolve your issue.

  -Joe

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• Don't see the screen applications & data after the update means that your data has been erased?

  I've just updated to iOS 10 and there is installed, but it shows a screen called Apps & data and gives options to restore the data, set it up as a new iPad or move data from Android. I was wondering if it meant that my data has been deleted completely?

  It's an iPad running iOS 10 4.

  Yes. This screen is available only after a deletion.

• data has been replaced before it can be read by the system

  Hello

  I use a flow sensor that creates a frequency output and which connected to my PCI-6035E. When I run it, it works for a few seconds and then gives an error. Error 200141 ' data has been replaced before it can be read by the system. " I also tested with a pulse rather than the flow sensor generator, and the error only when I changed the frequency. How can I solve this prolem?

  Thanks in advance!

  Thank you for your answers, Bob.

  I got it now works, the problem was that I was using continuous samples. I am now a single sample with a while loop and it works.

• IIS 7.5, the NETBIOS command limit has been reached

  We use IIS services and media to stream videos. It comes to our dedicated streaming server. On rush hour, an error showed by saying 'the NETBIOS command limit has been reached.

  More info on platform:
  

  • IIS version is 7.5
  • OS version is Windows Server 2008

  Any info on this would be helpful extreme.

  Thank you

  
  

  Hi, Pranab,

  Error message "the NETBIOS command limit has been reached" in Windows Server 2003, Windows XP, and in Windows 2000 Server

  http://support.Microsoft.com/kb/810886

  NETBIOS command limit has been reached

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/thread/fa2aa6f2-9f3e-4dd0-B203-60f910767574

  If you need more information, repost your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• I m error when i m to access the Manager version alb 3. "expired.the timeout period elapsed prior to obtaining a connection from the pool.this have bcz grouped all connection used and maximum pool size has been reached.

  Hi team,

  I m error when i m to access the Manager version alb 3. "expired.the timeout period elapsed prior to obtaining a connection from the pool.this have bcz grouped all connection used and maximum pool size has been reached.

  Please provide the solution.

  Concerning

  Ajay

  Discussion moved from the Knowledge Base of VMware Lab Manager

• End of stream has been reached

  Hello

  I spent a few days doing a DVD project with 6 menus, 3 tenors and a slideshow in Adobe CS6 Encore on my MacBook Pro. However, when I try to compile a DVD + R RW 4. GB 7 1-16 x speed, I get the error: «End of stream has been reached» I tried a lot of things that I found on this forum, but nothing helped.

  Can someone help me with this please?

  Kind regards

  Wannes

  Two threads with very different solutions. See if one works for you:

  Still DVD Error Message - «the end of the stream has been reached»

  end of the stream has reached (error 19901): Adobe Encore DVD

• Thus, it has been some time since iOS 9.2.1 happened, but I still have not downloaded it. What is the consensus on this update, is it useful to download or should I wait until 9.3?

  Thus, it has been some time since iOS 9.2.1 happened, but I still have not downloaded it. What is the consensus on this update, is it useful to download or should I wait until 9.3?

  Yes.

  Yes/No - up to you.

• I'm on an old computer with microsoft XP, it has been so long since I used it, one that I forgot my password can someone tell me how to reset the password?

  I'm on an old computer with Microsoft Windows XP, it has been so long since I used it, one that I forgot my password can someone tell me how to reset the password?

  Hello

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• A problem has been closed while I was in the hospital - how to reopen

  I have a problem and an identification number that has been closed while I was ill in the hospital.

  There is no option for me to reopen it and the cat is no longer accessible.

  And since the issue is in the serial number, I can not access the software. Help

  What should I do?

  Open a new issue.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader.  This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall a

  That's happened?   When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader. No idea how or why this has happened. This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall and reinstall Acrobat Reader a few times.  With Acrobat Reader installed now I can't open my browsers or other files that has changed.  With Acrobat Reader uninstalled icons are appropriate and I can open the browsers, but other files may not always be open.  What happened, and what I can do to use Acrobat Reader again and also use my browsers and open the other files?

  You have tried to download Windows Explorer?

  In any case, this might solve your problem: Application, file icons change in Acrobat/Reader icon

• Add or remove programs? Uninstall it says invalid or data has been corrupted, will not continue.

  Add or remove programs. The program I want to uninstall it is Printmaster 150.00 MB. I tried to uninstall it but uninstall it says invalid or data has been corrupted,

  will not continue. How to get out he computer?

  If you have the original installation media, a method that often works when an uninstall program is corrupt is to reinstall the app and then uninstall it.

  Otherwise, you could try free Revo Uninstaller or see http://ths.gardenweb.com/forums/load/comphelp/msg081415488395.html (unfortunately, the link to the manual uninstall instructions doesn't work; support for Broderbund software has been adopted by Encore.com, the search engine it leaves something to be desired; however, you can ask for help in a forum yet http://forums.encoreusa.com/).

  How to contact Technical Support (it is not clear if all Printmaster versions are still supported; I would try telephone assistance rather than on the web):
  http://forums.encoreusa.com/TM.asp?m=24071&mpage=1&key=%E5%B8%87

  The following (below the line *) comes from a post on the support forums forum moderator yet.  I have not linked to it because earlier in the post, it is suggested to use a registry cleaner in the manual uninstall.  Certainly, I do NOT recommend to use any registry cleaner.

  *************************************************************************************************************
  NOTE: this message does not apply to PrintMaster 2.0 or Print Shop 2.0.

  Broderbund programs, including (but not limited to) print shop, PrintMaster, designer of Scrapbook memories of creation and creator of calendar, are installed in the Program Files folder where most of the software are installed. However, many Broderbund programs will install also files and folders in other places on the hard drive.

  When one of these programs of Broderbund is uninstalled because it is suspected that the installation is corrupt, it's always a good idea to make sure to manually delete all the files and folders stored on the hard drive that are not deleted automatically during an uninstall normal - to ensure that all corruption is removed before the program, is reinstalled.

  Here are the paths of the additional folders where Broderbund software is commonly installed:

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  and

  C:\Documents and Settings\ [your user name] \Local Settings\Application Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\All Users\Broderbund logiciels\Print

  and

  C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  and

  C:\ProgramData\Broderbund logiciels\Print

  **********

  PrintMaster address books can be accessed from and saved to the BOOKS folder that is a subfolder of the folder prints shown below (PrintMaster address books may be accessed from or saved to the Documents folder)

  Windows XP: C:\Documents and Settings\All Users Data\Broderbund logiciels\Print

  WinVista/Win 7:Print and C:\Users\All Users\Broderbund logiciels\Print logiciels\ C:\ProgramData\Broderbund

  (As you can see, when PrintMaster address books are registered under WinVista and Windows 7, they are saved in two files).

  For example, the address for PrintMaster 18 books would be saved in these folders on WinVista or Windows7 computer

  C:\ProgramData\Broderbund Software\Print\PrintMaster\18.0\Books

  C:\Users\All Users\Broderbund Software\Print\PrintMaster\18.0\Books

  To make sure that saved the address books are not deleted during the uninstall process, they must be saved prior to PrintMaster is uninstalled. When these address books are restored, it will be necessary to restore these in the same two folders address books - because an address book will not appear in the file. Open list, if not in the two files.

  Address books print shop can easily be stored in the Documents folder. So, if you have registered your address books in the Documents folder, it is not necessary to save the address book before you uninstall the print shop.

  **********

  Files that control the Project Gallery and the Art Gallery are stored in the folders of ART PROJECTS & which are subfolders of this folder to print

  Windows XP: C:\Documents and Settings\ [your username] \Local Data\Broderbund logiciels\Print

  WinVista/Win 7: C:\Users\[your-username]\AppData\Local\Broderbund logiciels\Print.

  For example, ART & for PrintMaster 18 PROJECT files would be in this folder on WinVista or Windows7 computer

  C:\Users\[your-username]\AppData\Local\Broderbund Software\Print\PrintMaster\18.0\PROJECTS

  Because these files can easily become corrupt if the video card driver is out of date or corrupted, the program folder that has been uninstalled (in this case, the folder 18.0) must be removed before the program is re-installed. It is completely safe to delete the folder PrintMaster - because a new facility this 18.0 folder will be performed when PrintMaster is uninstalled.

  If there is only one version of PrintMaster installed on the computer, the PrintMaster folder in this example could also be deleted safely.

  **********

  It is not absolutely necessary to remove the Adbook.exe file that controls the program PrintMaster addressbook. But it's always a good idea to know that this file is installed in this folder

  C:\Program Files\Fichiers Files\Broderbund\UMM