Ensuring that my dealer does not receive a ton of bounceback notifications

Similar Questions

• I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly.

  I run the program "TuneUp utilities" and I recently received a notification of the statement that "the BHDrvx64device does not work correctly" program proposed to update the driver, but there is no provision in any of the dialog boxes.  Windows Help and support says: help for this program was created in Windows Help format, which depends on a feature that is not included in this version of Windows. However, you can download a program that will allow you to view help created in the Windows Help format. All this brought me here, please, how to fix this?

  The last thing you want to do is install and run any third tuneup/Optimizer program.

  In the worst cases of such utilities can cause system failure or program, uninstall it, having restored firstly of the changes he could do.

• Receiving UDP does not receive messages

  Hello. I have problem with UDP receiver.

  I can receive messages from the same port you write.

  Stream: open vi--> vi--> read vi UDP UDP writing.  Transmitter and receiver usinf th test port.

  When I try to use vi UDP listen port to just read, I get all the data.

  Program flow. I use vi to send the command on the serial port to MCU. Answer MCU return by sending data to the network port using UDP.

  I start vi to listen to a port UDP (see attached), then I sent the order to MCU. I can see the response on Wireshark, but UDP vi does not receive anything.

  I checked the IP address. Lokks all the same. IP address of the PC and decice is the same as when I write and read at the same time. Any other port.

  Any help please.

  Is the port that you want to use to open? For safety that many IT services will be blocked in ports that don't think they are necessary, or don't want to use.

• my mouse is recognized that it simply does not work?

  my mouse is recognized that it simply does not work?

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

   

  The mouse does not work.

  1. What is brand and model mouse?

  2. do you receive any error messages?

   

  There could be a problem with the drivers. To check that I suggest you to update the drivers and check if the problem persists.

  Visit the site to update the driver:

   

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658?WA=wsignin1.0

  You also try to get the latest drivers from the manufacturer.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• OME does not receive details of the inventory and the State for some devices

  OME does not receive the details of the inventory and the State for some servers.

  For example when looking at one of our PowerEdge R620s is all that presents itself:

  

  iDRAC firmware and LCC is updated (version 2.21.21.21 is installed.)

  I reset the iDRAC, and that did not help.  I have no problem with most of the other R620s in the same range of discovery.

  I deleted the object to OME and re-discovered twice over the past week it but did not help.

  Things seem ok when I use the troubleshooting tool:

  

  Anyone has any info on what may be going on here or how to fix this?

  Thank you

  Hello

  Thanks for the details in the post.

  Wanted to check what version of OME use you - OME 2.1?

  If so, this behavior with ws - man discovery could potentially due to expiry of certificate on this device. You can launch the iDRAC user interface and confirm the certificate information.

  2.1 the OME, the WS - Man communication component is updated. The most recent component does not communicate with the device if that device has been exceeded in the certificate.

  Sslresetcfg running via racadm will reset the certificate. For details and solution, see same threadhttp://en.community.dell.com/techcenter/systems-management/f/4494/t/19653767 .

  Let us know if that helps.

  Thank you
  Vijay

• BlackBerry Smartphones BlackBerry support insists that STV100-1 does not support the China Mobile HK?

  Then I go to Hong Kong right now with my Priv, using a prepaid of China Mobile Hong Kong that I've used with my classic. Noticed that I can not make calls with it so I called BlackBerry charge to open a support case.

  I noticed two things:

  -I am able to receive a 4G signal

  -Whenever I make a call, network goes to no Service. I also can't find any network if the phone is set on 2G or 3G only

  -I can not receive calls, it keeps saying number not reachable, as if the phone was turned off

  -In the phone app, my number is listed as unknown.

  After a lot of troubleshooting with the support rep, she argued that my private does not support the China Mobile HK, which doesn't seem wise. I'm temporarily using the card with a backup of Telus/Koodo G4, while my private does not work, and it works fine.

  Priv STV100-1 supports:

  • FD - LTE 1, 2, 3, 4, 5, 7, 12, 17, 20, 29, 30
  • HSPA + 1, 2, 4, 5/6, 8

  H812 G4 Telus LG support:

  • FD - LTE 2, 4, 5, 7, 12, 17
  • HSPA + 1, 2, 4, 5/6

  China Mobile uses UMTS and LTE 3/7 1/8. This is why don't the Priv actually be MORE supported? I ' n suspect a hardware issue yet I can't seem to convince management of the case.

  Okay, BlackBerry RMAing my device now, so I guess that's it.

• How to check that the variable 'does not contain' value?

  Hello

  I use CP 7.0.1.237.

  We want to use the widget text box for a custom quiz and verify a response. While we understood how to check the existence of certain key words, we are not able to find a way to check that the content does NOT contain certain keywords. For example, we want to ensure that the text entered in this widget does not contain a "Transformation" and "Non-compliant.

  Is this possible at all?

  Thank you

  Anthony

  Anthony, it works perfectly. Created this conditional action with 4 decisions. I used the interaction of training text scrolling in CP8 (because now you can control the variable - which means I might have a Reset button):

  First decision:

  

  Second decision (the third is similar to the following)

  

  Fourth and final decision

  

  I put the variable words (v_first... v_fifth), it's a reflex I use since I shared actions that much. The variable associated to the ETB (you can now reset an empty var in CP8) is v_TextArea and the Boolean value that will decide if positive feedback (StarOK) should be shown is v_TA_OK. If you want to display a negative feedback, put this in the ELSE part of the final decision.

  FYI: it took 15 minutes, including the creation of assets and the variables and tests. Personally I would have needed more time to do it in JS, but that's just me.

  Lieve

• Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

  Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

  Someone in the building uses Apple can 790-795 network this person hack me and who is?

  Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

• I have a problem connecting on ebay if you use firefox, I get a message saying that the page does not not despite having cleared my cache and cookies.

  I have a problem connecting on ebay when you use firefox, it has been fine for years, but since a few days, I get a message saying that the page does not when I try to log in. I tried to clear my cookies and cache, but it makes no difference. This does not occur in google chrome and I can log on fine there so what's the problem with firefox?

  Do you also have this problem if you temporarily switch to private browsing mode?

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Select: [X] 'always use private browsing mode '.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  See also:

  • https://support.Mozilla.org/KB/fix-login-issues-on-websites-requrie-passwords

• It seems that FFv.12 does not allow Scandinavian letters in the names of downloaded files, but gets stuck all by contacting the localhost?

  I do a fileupload page and it seems that FFv.12 does not allow for Scandinavian letters in the names of downloaded files, given that the browser gets stuck trying to communicate with the local host. Fix? This behavior differs from that of other browsers (IE, Chrome, Opera and Safari).

  That are Unicode characters in the name of the file or the characters in the top 0 x 80-0xFF range?

• Contact does not receive messages

  Hello, I need emergency aid, like one of my Skype contacts does not receive any of my messages, but I can receive all their I tried to register another account, but it still does not work, I have no idea why

  Update: managed to fix Skype messages obtained through after about 500 of them sent

• Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Hello

  Thanks for posting your question in the Microsoft community.

  I understand that when you try to connect to the Internet, he says at the outset that Internet is not responding and then after some time to connect. Let us know if this is incorrect.

  It would help if you could answer these questions.

  a. what version of Windows is installed on the computer?

  b. don't you make changes to the computer before the show?

  I suggest you check out the link and follow the steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if you need more assistance.

• Why can't search contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist

  Why can not search for contacts on my profile bar, the search I want to say that if I need to find contacts I put the name in the search bar on my profile but still they say that this contact does not exist why this before it was ok

  original title: the search for contacts

  Hi Sam,

  First select the operating system you are using, or maybe give an indication on the operating system installed on your computer. While other members of the community can help you with this problem.

  You use Outlook?

  Are you referring to outlook contacts?

  Reference: http://support.microsoft.com/kb/555375

• How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck