using 6341 USB frequency generation device but level is droped when conect

Similar Questions

• Windows found the driver for your device, but encounter an error when trying to install

  I have no ideal, what caused this problem because I am very sure that it was working again fine until I went to bed, but I woke up the next day, realize that my internet was completely cut off. I tried to update my network device but it doen't seem to be of any help.

  I hope that someone capable of seccond me with some light as what the case of the latter and the resolution.

  Thanks in advance. :)

  -Brian

  Hi Brian,.

  You can follow the steps described in the article below

  You receive an error message if you try to install a USB device on a Windows Vista computer that has been upgraded from Windows XP

  http://support.Microsoft.com/kb/940267

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• USB controller: unknown device next to a yellow question mark

  Hello

  Middle of last year had a system has crashed, rebuilt and has worked well since then.

  Done only USB connections since then has been with my tablet to transfer images.

  Before the crash, he worked well with connection to the solution Conon EOS Utility Desktop software to transfer images from the camera to the PC.

  Given that rebuilt have not used this feature, but he tried a few days back it does not recognize the Original title:

  USB controller

  connection. Again I tried to use a USB SD card reader, but no luck.

  Two working elements the Tablet and a regular USB.

  There is a yellow question mark in front of the USB controller in the section other devices. Tried to reinstall error can't find.

  Not able to use the original CD from Dell, as all drivers are for SP1 and I'm Noah on SP3 version 5.1

  Any help would be greatly appreciated.

  Kind regards.

  Ken

  Hi Ken,

  You can visit the manufacturer's website and update the chipset drivers.

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

   
  He will deal with the issue.
   
   

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• Is it possible to use the USB device as an audio output on Satellite Pro?

  I have a satellite laptop computer pro that is used as the center of entertainment in my room before, i.e. ripped music is played through my stereo, it's my player to dvd etc..

  My problem is the following - the only link of notebook with stereo I know and am currently using is a 3.5 mm jack adaptor phono twins connected at the front of the laptop and then phono leads stereo auxiliary input adapter. It works pretty well but I noticed that when you listen to songs more calm music, there is a lot of background noise, almost as if the internal working of the laptop sounds are picked up through the headphone jack.

  Y at - it another way to make a portable hi-fi audio output via usb for example, thus obtaining a more pure sound. My hi-fi entry is phono of twins.

  I'd appreciate any help on this topic. Thank you

  Hello

  See this topic
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14645

  There are two useful links providing you a USB audio device to record sounds and to connect other audio devices.
  I put t know what laptop, you have exactly, but it should support a S/PDIF (same headphone jack) port.
  Here, you can connect the S/PDIF audio cable and can connect the HFI for notebook computer in digital mode.

• Using the USB audio device as default instead of analog audio ports

  Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default.  The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device.  Is it possible to put the USB audio as default microphone device?

  Hello RSA 456,.

  Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
  Please follow the method described below to solve the problems.
  Method 1:

  1. plug your USB microphone.
  2. the LED will light to indicate that it is powered USB.
  3. Windows will automatically detect the USB Audio device and install the universal drivers.
  4. to set up your microphone as default device USB Open Control Panel.
  5. Select display as a classic view of your control panel, then select Select Sound.
  6. click on the recording tab. Here your USB Microphone will be listed.
  7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
  8. the default device is used in most programs such as tape recorder simple registration.

  Method 2:
  Please click the link below to check how to check if the hardware works just fine.
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Kind regards
  Sooraj.S

• You receive the error software device driver has not been installed successfully using the USB LAN cable

  Original title: Please help!

  I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 are you able to get any USB devices to work in USB ports?

  Check the status of the device and the driver Version:

  a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. double-click the category containing your device driver and thendouble - click the device name.

  c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

  d. click OK, exit Device Manager.

  Method 1:
  You can update the drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Use Windows Update to find a device driver
  Note to use Windows Update, you must be connected to the computer as an administrator:
  Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b check the updates.
  AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
  If updates are available, click the driver you want to install, and then click on install.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  If you need further assistance, please answer and we will be happy to help you.

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  My pro iPad connects to the WIFI, but loses connectivity to drops in use.  My other IOS devices (iPhone, macbook, etc.) do not have this problem.  Ideas to solve?

  Hello BrooklynWM!

  I definitely want my iPad to stay connected to the Wi - Fi connection while I use it.  Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping.  We can try a few things.

  Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network

  Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported

  After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.

  Best regards.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Restore the options popup after selecting "Non-action" and choose to use this option, whenever a device is plugged in USB?

  Hello

  Did you follow the "AutoPlay Repair Wizard"?

  You can follow the link provided in the previous post. Later, check to see if the problem persists.

  Hope the helps of information.

• I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I try to use a USB 2.0 port 20 adapter SATA/IDE to clone my hard drive but the drive iI'm try clone has been partitioned as a GPT protected partition. Any can help me?

  I don't think that you can do in XP. I think that you need x 64 XP, Vista x 64 win7 x 64 or windows server x 64. As it says here

  The only thing you can do in XP's format

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• GPO: CD and DVD: deny write access prevents the user to use their USB Pen drive, but other users or ok

  My users have secure readers Pen who throw a CDROM partition with a secure logon application that decrypts the key to mass storage USB the USB on successful logon. The problem I have is that users who install the USB cannot initialize then the app launcher CDROM to enter their password to access the element of the rendering it useless USB mass storage.

  However, any user who has the same type of USB key that plugs in to the endpoint that has already installed the drivers is able to access their own USB or the other users of USB stick (knowledge by providing the password).

  So I've isolated the problem being down to the presence of the GPO setting shown above on the removable storage access policy and by not having not this policy in place when a user installs the USB key, they have no problems, but I can't find a way to clean a user that is already broken, even if I delete the GPO from this user , remove their local profile so that they start as a new user (no roaming or other data) and use a variety of utilities such as USBOblivion to clear the registry and the file system of the USB and installation. When the original user logs back and then installs the USB again, they have the same problem, but no one else does. I have the same problem if I try with another user or administrator as the first user after "clean it up". Everyone can use the pen drive except the user who originally installed when the GPO was in place.

  If I move the user to a new endpoint or rebuild their end point, then they have no problem being the USB setup and then use it because the GPO has been deleted, so what I need to know, that's what he's talking about installing USB and the GPO which is tattooed somewhere in Windows and how can I remove it?

  Hello

  Welcome to the Microsoft community.

  I suggest you post this query on the TechNet forums.

  You can refer a link below to send this request.

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Let us know if you have a Windows problem, we will be happy to help you.