Entry not allowed data in HFM to basic levels

Similar Questions

• Satellite L100-120: Wlan does not allow the transmission of large data packets

  Satellite L100-120, Intel 3945ABG.
  Router Wi - fi is 3COM OfficeConnect Wireless, same problem with Dlink DI-524.

  By default my wi - fi card does not allow the transmission of packets of data.

  I use ping-f-l 1464 192.168.1.1 to check if it is possible to send a large package. All packages more then 600 large fail to be sent.

  It is tragically wireless performance and I almost cannot use internet at all. I solved the problem partially by setting the MTU to map wi - fi at 548. Connection is now stable, although I can not yet send massive emails. Anyway, it is not a good situation to have such a low MTU value.

  Everybody respected this problem?

  I think you will find the solution in this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15101

  I think the secret is the update of the BIOS!

• HARD DRIVE EXTERNAL WD NOT ALLOWING ACCESS TO DATA

  MY HARDIVE TERRABYTE WD IS NOT ALLOW ME ACCESS TO ALL THE DATA THAT IT CONTAINED, BUT IT SHOWS THAT IT IS CONNECTED TO MY COMPUTER WHEN I PLUG IT INTO THE PORT AND THE LIGHT FLASHES AT THE DISK TO SAY WD WORKS. I HAVE TROUBLESHOOTED THE DEVICE AND IT SAY NO PROBLEMS FOUND

  Moved from feedback

  Original title: EXTERNAL WD HARD drive

  Hello

   
  As you said that the problem persists even by connecting the device to another computer, then the issue could be with the external hard drive also.
   
  So, I suggest you to see the link and install the drivers from the manufacturer's website.
  http://support.wdc.com/product/download.asp?lang=en
   
  Contact the manufacturer for assistance:
  Reference:
  http://community.wdc.com/
   
  Thank you.

• enforcement of data protection does not allow me to install itunes

  whenever I try to install Itunes appears a panel titled data execution protection, aand does not allow me to load Itunes. ???

  Hello

  1. What is the exact error message do you get?

  2. what version of iTunes you are trying to install?

  3. are you able to install other programs on the computer?

  4. How do you try to install it?

  DEP is a security feature that can help prevent damage to your computer from viruses and other security threats. DEP can help protect your computer by analyzing the programs to ensure that they use the system safely memory. If a program tries to code running (also known as the execution) of memory in an incorrect way, DEP closes the program.

  Method 1: I suggest to uninstall any old version of this iTunes on the computer and then download and install the latest version of iTunes, then check if the problem persists. You can check the help below link.

  To remove, and then reinstall iTunes from windows XP:

  http://support.Apple.com/kb/HT1925

  Method 2: Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926

  For your reference: Solve the problems installing and uninstalling the programs on Windows computers. http://support.Microsoft.com/kb/2438651

  You can also view the resources specific to iTunes. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
  http://www.Apple.com/support/iTunes/

  Hope this information is useful.

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• Show: not allowed to manage data

  Well, I had the upgrade work and everything seems good, except when I go to edit the configuration files and manage data, I get: show: not allowed to manage data

  I checked that the edition code is in:

  • datamanagecode
  • editcode
  • enadiscode

  and I don't see any permission issues.

  Any ideas?

  Thank you.

  Daryl

  like changing the ID groupd of these files to the web server group ID

• My system restore is not allowed me to choose my own Date at all

  My system restore

  Is not allowed me to choose my own Date at all help now please

  It will allow you ONLY to choose a date for which there is a restore point.

• Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Dear all,

  I tried to do a procedure that will search for a group of approval in our database that matches.

  (1) the number of levels

  (2) the number of users by each level

  (3) the id of users by level

  entered by the user.

  I tried various methods to receive user input dynamically at run time, but in vain.

  Finally finished my procedure allowing the user to enter the parameters and then executes the procedure, to which these parameters are passed as arguments. (1 variable for the number of levels and 2 userdefinedarrays with the number of users by level and level respectively)

  Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Thanks in advance,

  Séverine Suresh

  HEY, Sebastian,

  3035408 wrote:

  Hello Sir,

  My question is that if I'm going to say, the number of levels 5, is there any way by which, at runtime, the procedure prompts me to enter at the start of the number of users per level. Now as soon as I get the number of users per level can I do the procedure ask me to enter the nicknames of the members of each level. I mean, something like a invite.

  Thank you

  Séverine Suresh

  There is no way to do it in SQL or PL/SQL, because not SQL PL/SQL is a way to get user input.  User interaction is a job for your front end, like Zlatko tool suggested in response to #5.  If your front end tool is SQL * Plus, you can use the substtitution variables, as Jarkko showed in response #6.

• 554 5.7.1 < END OF MESSAGE >: end-of-data rejected: user not allowed to relay

  Help, please. I have problems sending emails and get this message

  554 5.7.1 < END OF MESSAGE >: end-of-data rejected: user not allowed to relay

  Please reach out to support by triggering a case to review this one.

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• My renewal date is 6/28/15...My monthly bill was $42,39... and is now $74.19!... I have not allowed an upgrade, including the! I need my excess refund immediately!

  My renewal date is 6/28/15...My monthly bill was $42,39... and is now $74.19!... I have not allowed an upgrade, including the! I need my excess refund immediately! @

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• You are not allowed to open the form ORA-01403: no data found

  Hello

  I created a new forms of Oracle 10 g. It compiles successfully, but when it is open, it gives an error message: you are not allowed to open the form ORA-01403: no data found.

  I am already connected to the database. Please can someone help what is the reason of this problem, and no matter what possible resolution?

  Looks like you have some kind of security is enabled.  However, because you do not share details about your environment or what you're doing here is not that we can do is guess.

  • Exactly what version of forms do you use?
  • Exactly which version of the database that you are using?
  • You use something like Oracle E-Business (e.g. template.fmb)?
  • You created the form with Oracle Designer?
  • If you create a simple form using only the layout assistants and the DataBlock compared to schema Oracle demo (SCOTT), this form run?

  No additional details describing what you do or have done could be useful.

• End-of-data rejected: user not allowed to relay

  Help, please

  I can't send emails I get this message

  554 5.7.1 < END OF MESSAGE >: end-of-data rejected: user not allowed to relay

  I can receive emails [email protected]

  
  

  I created a folder for that matter you reported and will inform you by e-mail soon complete investigation. FYI file number is: 123134

• -Entry blank (or null of entry) is not allowed.

  Hello
  
  We are facing the error when we try to open the Discoverer reports below:
  
  

  An error occurred while handling the event. See the application log for more details. oracle.discoverer.applications.viewer.events.ApiConnectAppsSecureEvent 
  - Empty input (or null input) is not allowed. 

  The domain name of our application server and our explorers are different, there is no work around for this?
  
  Help, please.
  
  Kind regards
  KK
  
  Published by: Kk on August 2, 2012 21:44

  An error occurred during the processing of the event. Check the log of the applications for more details. oracle.discoverer.applications.viewer.events.ApiConnectAppsSecureEvent
  -Entry blank (or null of entry) is not allowed.

  Please see these documents.

  Error trying to open the workbook discoverer of Oracle Applications Framework [ID 376453.1]
  Void of entry (or Null) is not allowed when connecting to the Disco Viewer of Apps [ID 409008.1]
  Entry blank (or enter Null) is not allowed when you access Discoverer with SSO of EBS [ID 427559.1]

  Thank you
  Hussein

• How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, one

  How to find and replace data in fields of form in acrobat xi, its not allowing to do while trying, request adobe livecycle to settle. Help, please.

  Best way to do is the following:

  -Open the PDF in Acrobat.

  -Go to tools - form - form more Options - export data.

  -Save form data in an XML file somewhere on your system.

  -Open the XML file in a plain text editor (I recommend Notepad ++).

  -Let's say you want to replace all the years in dates "2013" to '2014 '. Do a global search & replace '2013-' to '2014' - (I added the dashboard in order to ensure that only the date fields are changed).

  -Save the XML file (maybe under a new name).

  -Go back to the PDF file and now go to tools - forms - more form Options - import data.

  -Select the modified XML file and import it.

  -Fact!