Show: not allowed to manage data

Similar Questions

• HARD DRIVE EXTERNAL WD NOT ALLOWING ACCESS TO DATA

  MY HARDIVE TERRABYTE WD IS NOT ALLOW ME ACCESS TO ALL THE DATA THAT IT CONTAINED, BUT IT SHOWS THAT IT IS CONNECTED TO MY COMPUTER WHEN I PLUG IT INTO THE PORT AND THE LIGHT FLASHES AT THE DISK TO SAY WD WORKS. I HAVE TROUBLESHOOTED THE DEVICE AND IT SAY NO PROBLEMS FOUND

  Moved from feedback

  Original title: EXTERNAL WD HARD drive

  Hello

   
  As you said that the problem persists even by connecting the device to another computer, then the issue could be with the external hard drive also.
   
  So, I suggest you to see the link and install the drivers from the manufacturer's website.
  http://support.wdc.com/product/download.asp?lang=en
   
  Contact the manufacturer for assistance:
  Reference:
  http://community.wdc.com/
   
  Thank you.

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• HP Pavilion dv7 Notebook PC - Windows Boot Manager does not allow me to restart the laptop

  HP Pavilion dv7 Notebook PC
  XH121UA #ABA
  Office home and Student 2007

  I turned on my laptop and got the following message is displayed:
  Windows Boot Manager
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.

  I had no problem before now with the computer. Yet once, this message has occurred during a turn on my laptop. I tried to restart the laptop, but it is not allowing me to restart. The laptop back to this message.

  I appreciate any help with this issue. I thank very you much for your time and knowledge.

  Hello

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Dear all,

  I tried to do a procedure that will search for a group of approval in our database that matches.

  (1) the number of levels

  (2) the number of users by each level

  (3) the id of users by level

  entered by the user.

  I tried various methods to receive user input dynamically at run time, but in vain.

  Finally finished my procedure allowing the user to enter the parameters and then executes the procedure, to which these parameters are passed as arguments. (1 variable for the number of levels and 2 userdefinedarrays with the number of users by level and level respectively)

  Why PL/SQL procedures does not allow users to enter data dynamically at run time?

  Thanks in advance,

  Séverine Suresh

  HEY, Sebastian,

  3035408 wrote:

  Hello Sir,

  My question is that if I'm going to say, the number of levels 5, is there any way by which, at runtime, the procedure prompts me to enter at the start of the number of users per level. Now as soon as I get the number of users per level can I do the procedure ask me to enter the nicknames of the members of each level. I mean, something like a invite.

  Thank you

  Séverine Suresh

  There is no way to do it in SQL or PL/SQL, because not SQL PL/SQL is a way to get user input.  User interaction is a job for your front end, like Zlatko tool suggested in response to #5.  If your front end tool is SQL * Plus, you can use the substtitution variables, as Jarkko showed in response #6.

• SecurityException: JVM Shared, is not allowed to set the Security Manager

  When run another Applet Java and discoverer of opening I get the following error

  oracle.disco.DiscoApplet

  SecurityException: JVM Shared, is not allowed to set the Security Manager

  java.lang.SecurityException: JVM Shared, is not allowed to set the Security Manager

  at sun.plugin2.applet.SecurityManagerHelper.checkPermissionHelper (unknown Source)

  at sun.plugin2.applet.AWTAppletSecurityManager.checkPermission (unknown Source)

  at java.lang.System.setSecurityManager0 (unknown Source)

  to java.lang.System.setSecurityManager (unknown Source)

  at oracle.disco.DiscoSecurityManager.init (unknown Source)

  at oracle.disco.DiscoApplet.init (unknown Source)

  at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init (unknown Source)

  to sun.plugin2.applet.Plugin2Manager$ AppletExecutionRunnable.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  After clicking 'OK', the following red text shows in the window of discoverer with a small error icon

  "Error.  Click for more details"

  When I click it evokes the java console to show the above

  I use Windows 7 64-bit Java1.7_25

  I also have users who are experencing the same thing.

  Addition of

  our page basejpi.htm which is used to launch our applet forms seems to have solved this error for us.

• iPhone showed a map of a device trying to connect to iCloud. I said "do not allow". How did even get on my iCloud account right now?

  A notification on my iPhone showed a map of a device trying to connect to my iCloud in Tampa, Florida (never been there). I said "do not allow". Less than 30 minutes, I see all my devices lost Emails and an email from a new device that is connected using a computer Windows in Tampa, Florida. How someone access if I do not?

  Another weird thing, I was recently preparing a vacation to Tampa, FL given but never aired my iCloud email address but I use my credit card at resort and used a different email address (i.e. not associated with). My iCloud password is associated with another email address, nor any association with the credit card.

  Hi there, Aldin7!

  You did the right thing by clicking "do not allow" for the connection. I'm glad that you reached out, I will do my best to help.

  The first thing I would recommend is to change the password of your ID: ID Apple

  This article goes over how to change your Apple ID password, for reference.

  Then I got Contact Apple for assistance with the security of the Apple ID accounts to make sure that everything is safe.

  Thank you for using communities of Apple Support and have a great day!

• I get a pop up screen I need, but the screen is very low and does not allow more than 1 line of information while IE shows the window contextual integers of 27 lines

  I play games that allows me to send gifts to your facebook friends and when I click on send gift, a screen with the names of my friends will be displayed so that I can select the ones to send to... but since yesterday morning, the pop up screen using firefox became so weak that it allows only one line and it does not allow me scroll more than 5 times... While the IE pop-up window shows 27 lines at once, and I can scroll the following 27 and so on... I have pictures of the screen if you need...

  You should be able to resize the window pop - up to enlarge.

  You allow sites resize the popup window?

• Re: Realtek 8191SE card will not show up in Device Manager

  Part number Satllite L450D-128: PSLY5E-01301LEN, Win7 Ultimate 64-bit.

  Hello

  I can't use my wireless internet connection. The connection to the LAN works fine when connected via a cable.
  I have read all related topics to make sure that I'm not repeating a problem already solved, but I can't figure out the problem.

  The connection in the status bar indicator displays no network available.

  The wireless light on the front of the laptop does not illuminate.

  FN + F8 does nothing (even after delivered to zero cards flash with package etc.) 8191SE map does not show in the Device Manager and tried to add manually without success.

  I installed the last card wireless driver specific to the 8191SE yet once but nothing.

  I also removed the card and re-sitting there but still nothing shows in the dev Manager.

  I've also updated my BIOS and made sure the wireless is turned on.

  Any help would be greatly appreciated.

  Thank you!!

  Do the last ultimate test: install original recovery image that you got with the functionality of your laptop and check.
  If the material is OK that should be listed in Device Manager after installing the driver on the right.

• Satellite L100-120: Wlan does not allow the transmission of large data packets

  Satellite L100-120, Intel 3945ABG.
  Router Wi - fi is 3COM OfficeConnect Wireless, same problem with Dlink DI-524.

  By default my wi - fi card does not allow the transmission of packets of data.

  I use ping-f-l 1464 192.168.1.1 to check if it is possible to send a large package. All packages more then 600 large fail to be sent.

  It is tragically wireless performance and I almost cannot use internet at all. I solved the problem partially by setting the MTU to map wi - fi at 548. Connection is now stable, although I can not yet send massive emails. Anyway, it is not a good situation to have such a low MTU value.

  Everybody respected this problem?

  I think you will find the solution in this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15101

  I think the secret is the update of the BIOS!

• update date and time for 3.6 numbers does not show the time and does not automatically update the date

  The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

  Hi david,

  where do you find ' update of the date and time.

  Quinn

• USB-5133 appearing does not in MAX, "loader" shows driver in Device Manager.

  I have a USB-5133 can I use it on several computers. I'm putting it on another PC (XP Pro). The device is recognized by windows and it goes to install the drivers. When it's done, in the Device Manager-> data acquisition devices, I see "NI USB-5133 Loader. On other computers, he said only: "NI USB-5133. The green light on the device is NOT on, and the device does not appear in Measurement & Automation Explorer.

  No idea why the appropriate driver is not loaded? I have NO-SCOPE 3.5.2.

  Hello Gallamine,

  The NI USB-5133 Digitizer is a plug-and-play device, try removing the device in MAX.  Then, unplug the device and plug it in again.  The computer should record the device of MAX as "NI USB-5133.  If this does not work, the data base of the MAX could be damaged.  To resolve this problem, see the following link:

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9

  Finally, if the database setting does not resolve this problem, try to reinstall the latest version of OR-SCOPE.

  Kind regards

  Roman S

• [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  Hi team,

  I am trying to connect to the Oracle 9i database using VB code below:

  strConnection = "Driver = {Microsoft ODBC for Oracle};" Server = SERVERNAME; UID = username; Pwd = PASSWORD"
  Connect = New ADODB. Connection
  Connect.Open (strConnection)

  The last line throws me below error:

  [Microsoft] [ODBC driver manager] Data Source name not found and no driver by default specified

  The VB code works well and able to connect to database server dev dev. The same script with the name of the UAT server does not work on server UAT.

  The servers are Windows server 2007-32 bit.

  When I checked the tab drivers in ODBC Data Source Administrator, dev server entry below:

  Microsoft ODBC for Oracle - 6.00.6001.18000 - Microsoft Corporation - MSORCL32.dll - Date

  Considering that the UAT server has entered below:

  Microsoft ODBC for Oracle-

  The Microsoft ODBC driver for oracle is listed in the tab UAT Server drivers, but did not have details of file version & dll. This driver is not installed correctly? If so, how the re install? Please help solve this problem as soon as POSSIBLE.

  Kind regards

  Tamil

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• System Center Operations Manager 2007 R2 - all agents show not monitored

  I finished installed System Operations Manager 2007 R2 with all components.  Agents of the customer which was discovered show not monitored in the administration server.

  Hi Michel,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps.

• enforcement of data protection does not allow me to install itunes

  whenever I try to install Itunes appears a panel titled data execution protection, aand does not allow me to load Itunes. ???

  Hello

  1. What is the exact error message do you get?

  2. what version of iTunes you are trying to install?

  3. are you able to install other programs on the computer?

  4. How do you try to install it?

  DEP is a security feature that can help prevent damage to your computer from viruses and other security threats. DEP can help protect your computer by analyzing the programs to ensure that they use the system safely memory. If a program tries to code running (also known as the execution) of memory in an incorrect way, DEP closes the program.

  Method 1: I suggest to uninstall any old version of this iTunes on the computer and then download and install the latest version of iTunes, then check if the problem persists. You can check the help below link.

  To remove, and then reinstall iTunes from windows XP:

  http://support.Apple.com/kb/HT1925

  Method 2: Problem installing iTunes or QuickTime for Windows: http://support.apple.com/kb/ht1926

  For your reference: Solve the problems installing and uninstalling the programs on Windows computers. http://support.Microsoft.com/kb/2438651

  You can also view the resources specific to iTunes. You can get in touch with the community of Apple or the support Web site for additional assistance on the issue:
  http://www.Apple.com/support/iTunes/

  Hope this information is useful.